Research progress in carbon nanotubes filled poly(phenylene sulfide) nanostructured composites

doi:10.19936/j.cnki.2096-8000.20210928.017

Abstract

Abstract: Polyphenylene sulfide (PPS) has higher strength, flame retardant, chemical resistance and heat proof, as well as better processing properties. However, its application is mostly constrained by the intrinsic brittleness. To improve the impact toughness, additional fillers, such as CNTs are usually used to enhance the properties. The applications of PPS reinforced by CNTs were concluded in detail and its preparation methods were summarized. The unique properties, concluding the crystallization behavior, the rheological properties, the mechanical, tribological, thermal, electrical along with electromagnetic properties were simply introduced. The effects of the surface modification, loading, dispersion and alignment of CNTs, preparation parameters, interphase and morphology on the properties of CNTs/PPS composites were also discussed. In addition, the insight into the excellent properties of CNTs/PPS nanocomposites was explored. Finally, the application prospect of CNTs/PPS was predicted.

Key words: polyphenylene sulfide, carbon nanotube, structure, properties

CLC Number:

TB332

DONG Hui-min, WENG Chuan-xin, LIU Cong, CHENG Li-jun, LI Yue-teng, QIAN Huang-hai. Research progress in carbon nanotubes filled poly(phenylene sulfide) nanostructured composites[J]. COMPOSITES SCIENCE AND ENGINEERING, 2021, 0(9): 107-117.

References

[1] 杨杰. 聚苯硫醚树脂及其应用[M]. 北京: 化学工业出版社, 2006.
[2] YANG R, SU Z, WANG S, et al. Crystallization and mechanical properties of polyphenylene sulfide/multiwalled carbon nanotube composites[J]. Journal of Thermoplastic Composite Materials, 2018, 31(11): 1545-1560.
[3] 杨睿, 苏正涛, 赵艳芬, 等. 微纳米填料填充改性聚苯硫醚研究进展[J]. 合成树脂及塑料, 2018(1): 70-75.
[4] DRESSELHAUS M S, LIN Y M, RABIN O, et al. Nanowires and nanotubes[J]. Materials Science & Engineering C, 2003, 23(1-2): 129-140.
[5] 陶静梅, 洪鹏, 陈小丰,等. 碳纳米管增强铜基复合材料的研究进展[J]. 材料工程, 2017, 45(4): 128-136.
[6] GRADY B P. Carbon nanotube-polymer composites: manufacture, properties, and applications[M]. Wiley, 2013.
[7] FENG D, XU D, WANG Q, et al. Highly stretchable electromagnetic interference (EMI) shielding segregated polyurethane/carbon nanotube composites fabricated by microwave selective sintering[J]. Journal of Materials Chemistry C, 2019, 7(26): 7938-7946.
[8] ARORA G, PATHAK H, ZAFAR S. Fabrication and characterization of microwave cured high-density polyethylene/carbon nanotube and polypropylene/carbon nanotube composites[J]. Journal of Composite Materials, 2019, 53(15): 2091-2104.
[9] 钟绍信, 蒋智杰, 朱亚明, 等. 聚苯硫醚低介电改性的研究进展[J]. 绝缘材料, 2020, 53(9): 5-10.
[10] RIBEIRO B, BOTELHO E C, COSTA M L, et al. Electrical and Thermal study of carbon nanotubes reinforced poly(phenylene sulfide) nanostructured composites[J]. Polímeros, 2015, 25.
[11] 杨焯. 聚苯硫醚基微孔膜的制备及其应用研究[D]. 天津: 天津工业大学, 2019.
[12] YOO T J, HWANG E B, JEONG Y G. Thermal and electrical properties of poly (phenylene sulfide)/carbon nanotube nanocomposite films with a segregated structure[J]. Composites Part A, 2016, 91: 77-84.
[13] 连丹丹, 张蕊萍, 申霄晓. 聚苯硫醚纤维增强增韧改性研究进展[J]. 合成纤维工业, 2013, 36(4): 45-48.
[14] 杨晗. 碳纳米管/聚苯硫醚增强增韧纤维的制备及其性能研究[D]. 太原: 太原理工大学, 2011.
[15] GAO Y, FU Q, NIU L, et al. Enhancement of the tensile strength in poly(p-phenylene sulfide) and multi-walled carbon nanotube nanocomposites by hot-stretching[J]. Journal of Materials Science, 2015, 50(10): 3622-3630.
[16] 曾群锋, 李鸿蒙, 郝友菖, 等. 一种超双疏纳米复合涂层的喷涂制备方法: CN108906547A[P]. 2018.
[17] 汪怀远, 王恩群, 孟旸, 等. 超双疏耐磨PPS基涂层的制备与性能[J]. 材料工程, 2017, 45(1): 38-42.
[18] DEZ-PASCUAL A M, NAFFAKH M. Synthesis and characterization of poly (phenylene sulfide)-grafted carbon nanotube nanocomposites[M]//Handbook of Polymer Nanocomposites. Processing, Performance and Application. Springer, Berlin, Heidelberg: 2015: 75-102.
[19] 王海霞, 李振环, 程博闻. 环氧化功能碳纳米管改性氨基PPS[J]. 复合材料学报, 2016, 33(11): 2468-2476.
[20] 王斌. 碳纳米管/聚四氟乙烯复合材料制备及性能研究[D]. 天津: 天津工业大学, 2014.
[21] DENG S, LIN Z, CAO L, et al. PPS/recycled PEEK/carbon nanotube composites: Structure, properties and compatibility[J]. Journal of Applied Polymer Science, 2015, 132(35): 42497.
[22] CAO L, DENG S, HE Z, et al. Effects of carbon nanotube on mechanical, crystallization, and electrical properties of binary blends of poly (phenylene sulfide) and polyphthalamide[J]. Journal of Thermal Analysis & Calorimetry, 2016, 125(2): 927-934.
[23] XU L, ZHANG B, XIONG Z, et al. Preparation of conductive polyphenylene sulfide/polyamide 6/multiwalled carbon nanotube composites using the slow migration rate of multiwalled carbon nanotubes from polyphenylene sulfide to polyamide 6[J]. Journal of Applied Polymer Science, 2015, 132(31): 42353.
[24] 胡松青, 吕强, 王志坤, 等. 碳纳米管/聚合物复合材料界面结合性能的研究进展[J]. 复合材料学报, 2017, 34(1): 12-22.
[25] 江盛玲, 张志远, 华幼卿, 等. 聚苯硫醚/羟基改性多壁碳纳米管复合材料的非等温结晶行为[J]. 高分子材料科学与工程, 2012, 28(12): 47-50.
[26] 江盛玲, 张志远, 谷晓昱. 聚苯硫醚/羟基改性多壁碳纳米管复合材料等温结晶动力学的研究[J]. 塑料工业, 2011, 39(4): 79-82.
[27] 江盛玲, 张志远, 华幼卿, 等. 羟基及羧基改性多壁碳纳米管对聚苯硫醚结晶性能的影响[J]. 高分子材料科学与工程, 2011, 27(8): 77-79.
[28] DEZ-PASCUAL A M, NAFFAKH M, MARCO C, et al. Mechanical and electrical properties of carbon nanotube/poly(phenylene sulphide) composites incorporating polyetherimide and inorganic fullerene-like nanoparticles[J]. Composites Part A, 2012, 43(4): 603-612.
[29] ZHOU Y, JIA L, WANG T, et al. Preparation of carbon nanotube and graphene doped polyphenylene sulfide flexible film electrodes and the electrodeposition of Cu₂O nanocrystals for hydrogen-generation[J]. International Journal of Hydrogen Energy, 2018, 43(15): 7356-7365.
[30] 袁霞, 孙义红, 安玉良, 等. 碳纳米管/碳纤维增强聚苯硫醚复合材料研究[J]. 化学与粘合, 2015, 37(1): 11-14.
[31] 王永杰. 聚苯硫醚电磁功能复合材料及其吸波性能研究[D]. 绵阳: 西南科技大学, 2010.
[32] NOLL A, FRIEDRICH K, BURKHART T, et al. Effective multifunctionality of poly(p-phenylene sulfide) nanocomposites filled with different amounts of carbon nanotubes, graphite, and short carbon fibers[J]. Polymer Composites, 2013, 34(9): 1405-1412.
[33] 傅思睿, 杨静晖, 傅强. 碳纳米管改性聚苯硫醚熔纺纤维的结构与性能研究[J]. 高分子学报, 2012(3): 344-350.
[34] CAGLAR B, FISCHER P, KAURANEN P, et al. Development of carbon nanotube and graphite filled polyphenylene sulfide based bipolar plates for all-vanadium redox flow batteries[J]. Journal of Power Sources, 2014, 256(256): 88-95.
[35] PARK S J, LEE K M, PARK S J, et al. Overlapped repair performance for carbon-PPS composites in vacuum-assisted thermal bonding[J]. Modern Physics Letters B, 2020, 34(07n09): 2040027.
[36] YANG J, XU T, LU A, et al. Electrical properties of poly(phenylene sulfide)/multiwalled carbon nanotube composites prepared by simple mixing and compression[J]. Journal of applied polymer science, 2008, 109(2): 720-726.
[37] KIM Y J,YOO T J,LEE T W, et al. Microstructures, thermal and electrical properties of poly(phenylene sulfide)-carbon nanotube nano-composite films[C]//4th International Conference on Nanotek & Expo. DoubleTree by Hilton Hotel San Francisco Airport, USA: 2014.
[38] JIANG S L, GU X Y, ZHANG Z Y. Nucleation effect of hydroxyl-purified multiwalled carbon nanotubes in poly(p-phenylene sulfide) composites[J]. Journal of Applied Polymer Science, 2012, 127(1): 224-229.
[39] ZENG L, MOU H, QIAO Y, et al. Processing, structure, and properties of multiwalled carbon nanotube-poly(phenylene sulfide) composite fibers[J]. Journal of Applied Polymer Science, 2017, 134(14): 44609.
[40] JIANG Z, HORNSBY P, MCCOOL R, et al. Mechanical and thermal properties of polyphenylene sulfide/multiwalled carbon nanotube composites[J]. Journal of Applied Polymer Science, 2012, 123(5): 2676-2683.
[41] YANG J, XU T, LU A, et al. Preparation and properties of poly(p-phenylene sulfide)/multiwall carbon nanotube composites obtained by melt compounding[J]. Composites Science and Technology, 2009, 69(2): 147-153.
[42] 江盛玲, 谷晓昱, 张志远. 聚苯硫醚/羟基改性多壁碳纳米管复合材料动态力学行为研究[J]. 材料工程, 2011(6): 77-80.
[43] DEZ-PASCUAL A M, NAFFAKH M, MARCO C, et al. Rheological and tribological properties of carbon nanotube/thermoplastic nanocomposites incorporating inorganic fullerene-like WS2 nanoparticles[J]. Journal of Physical Chemistry B, 2012, 116(27): 7959-69.
[44] 张萌萌, 贾广跃, 熊丽萍, 等. 碳纳米管/聚合物复合材料的导热模型进展[J]. 精细化工, 2020, 37(6): 1081-1087.
[45] ZHANG H, GAO C, LI H, et al. Analysis of functionally graded carbon nanotube-reinforced composite structures: A review[J]. Nanotechnology Reviews, 2020, 9(1): 1408-1426.
[46] RIBEIRO B, HEIN L R O, COSTA M L, et al. Nonisothermal crystallization kinetic study and thermal stability of multiwalled carbon nanotube reinforced poly(phenylene sulfide) composites[J]. Polymer Composites, 2017, 38(3): 604-615.
[47] 郭连权. 碳纳米管的物性与应用[J]. 人工晶体学报, 2002, 31(2): 164-168.
[48] YU S, WONG W M, HU X, et al. The characteristics of carbon nanotube-reinforced poly(phenylene sulfide) nanocomposites[J]. Journal of Applied Polymer Science, 2010, 113(6): 3477-3483.
[49] 朱成瑶, 王园园, 王万杰. 碳纳米管/聚合物电磁屏蔽复合材料研究进展[J]. 微纳电子技术, 2020(8): 623-630.
[50] HAN M S, LEE Y K, LEE H S, et al. Electrical, morphological and rheological properties of carbon nanotube composites with polyethylene and poly(phenylene sulfide) by melt mixing[J]. Chemical Engineering Science, 2009, 64(22): 4649-4656.