Deicing technology of resin matrix composites by electric heating based on carbon nanotube film

doi:10.19936/j.cnki.2096-8000.20240728.006

Abstract

Abstract: In this paper, the application of carbon nanotube films to the electrothermal deicing of resin matrix composites was studied. Carbon nanotube films/composites were prepared by an integrated molding process, and their structures were optimized. The electrothermal and deicing properties of carbon nanotube film/composites were investigated. The results show that the obtained carbon nanotube film/composite has good internal quality, excellent electric heating performance, high deicing efficiency and low deicing energy consumption compared with metal electric heating elements.

Key words: carbon nanotube film, resin matrix composite, integrated molding process, electrothermal deicing technology, deicing energy consumption

CLC Number:

TB332

YE Lu, ZHANG Daijun, LI Jun, LI Fuping, CHEN Xiangbao. Deicing technology of resin matrix composites by electric heating based on carbon nanotube film[J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(7): 45-52.

References

[1] 赵安家, 孟哲理. 飞机结冰及预防控制措施研究[J]. 飞机设计, 2018, 38(3): 55-59.
[2] 胡林权. 民用飞机机翼电加热防/除冰应用现状及技术难点[J]. 航空科学技术, 2016, 27(7): 8-11.
[3] 杨常卫, 张功虎, 孙涛, 等. 黑鹰直升机旋翼桨叶防/除冰系统研究[J]. 直升机技术, 2011(1): 37-44.
[4] 刘代军, 陈亚莉. 用于波音787的新型复合材料机翼除冰系统[J]. 航空制造技术, 2009(17): 82-83.
[5] 谌广昌, 纪双英, 赵文明, 等. 直升机旋翼除冰系统加热垫试验研究[J]. 航空工程进展, 2019, 10(2): 201-205, 211.
[6] CHIEN A T, CHO S, JOSHI Y, et al. Electrical conductivity and Joule heating of polyacrylonitrile/carbon nanotube composite fibers[J]. Polymer, 2014, 55(26): 6896-6905.
[7] KIM G M, NAEEM F, KIM H K, et al. Heating and heat-dependent mechanical characteristics of CNT-embedded cementitious composites[J]. Composite Structures, 2016, 136: 162-170.
[8] MAS B, FERNNDEZ-BLZQUEZ J P, DUVAL J, et al. Thermoset curing through Joule heating of nanocarbons for composite manufacture, repair and soldering[J]. Carbon, 2013, 63(2): 523-529.
[9] CHU K, YUN D J, KIM D, et al. Study of electric heating effects on carbon nanotube polymer composites[J]. Organic Electronics, 2014, 15(11): 2734-2741.
[10] CHEN L, REN J, ZHANG Y, et al. Microstructure simulation and heat transfer optimization for grapheme oxide doped anti-/deicing composites[J]. Composites Science and Technology, 2021, 213: 108901.
[11] XU X, ZHANG Y, JIANAG J, et al. In-situ curing of glass fiber reinforced polymer composites via resistive heating of carbon nanotube films[J]. Composites Science and Technology, 2017, 149: 20-27.
[12] ZHANG Q, YU Y, YANG K, et al. Mechanically robust and electrically conductive graphene-paper/glass-fibers/epoxy composites for stimuli-responsive sensors and joule heating deicers[J]. Carbon, 2017, 124: 296-307.
[13] TARFAOUI M, El MOUMEN A, BOEHLE M, et al. Self-heating and deicing epoxy/glass fiber based carbon nanotubes buckypaper composite[J]. Journal of Materials Science, 2019, 54(2): 1351-1362.
[14] 梅浩. 多壁碳纳米管纸及其复合材料防除冰性能研究[D]. 哈尔滨: 哈尔滨工业大学, 2020.
[15] 田甜, 王渊, 陶明杰, 等. 石墨烯复合材料电热除冰实验研究[J]. 科学技术与工程, 2019, 19(28): 390-395.
[16] YAO X, HAWKINS S C, FALZON B G. An advanced anti-icing/de-icing system utilizing highly aligned carbon nanotube webs[J]. Carbon, 2018, 136: 130-138.
[17] CHU H, ZHANG Z, LIU Y, et al. Self-heating fiber reinforced polymer composite using meso/macropore carbon nanotube paper and its application in deicing[J]. Carbon, 2014, 66: 154-163.
[18] JIAO X, XU L, SUN X, et al. Single-wall carbon nanotube fiber non-woven fabrics with a high electrothermal heating response[J]. Nano Research, 2024, 17: 5621-5628.