STUDY ON PROCESSING PARAMETERS OF TAPE PLACEMENT FOR CONTINUOUS GF REINFORCED PPS

Abstract

Abstract: Orthogonal experiments and single-factor experiments were carried out to evaluate the effects of five processing parameters including temperature of hot air, tape laying speed, pressure of roller, temperatures of roller and platform on interlaminar shear strength (ILSS) and flexural strength of the laminates to get optimal parameters in tape placement process. The prepreg made of polyphenylene sulfide as matrix and continuous glass fiber as reinforcement was used. The results show that the pressure of roller has significant impact on ILSS and the temperature of platform has less impact on ILSS, while the tape laying speed has significant impact on flexural strength and the temperature of roller has less impact on flexural strength. Besides, higher ILSS and flexural strength can be achieved by improving the tape laying speed and pressure of roller properly and choosing the temperature of hot air, temperature of platform and temperature of roller in the suitable range for operation. When the optimal condition of the tape laying speed is 40 cm/min, the pressure of roller is 0.4 MPa, the temperature of roller is 240 ℃, the temperature of hot air is 340 ℃ and the temperature of platform is 240 ℃, ILSS and flexural strength of the laminate can reach 79.94 MPa and 1097.37 MPa, respectively.

Key words: continuous glass fiber, polyphenylene sulfide, tape placement, interlaminar shear strength, flexural strength

CLC Number:

TB332

LI Jing, HONG Cheng, GUO Bing-bing, FANG Li. STUDY ON PROCESSING PARAMETERS OF TAPE PLACEMENT FOR CONTINUOUS GF REINFORCED PPS[J]. Fiber Reinforced Plastics/Composites, 2017, 0(5): 72-79.

References

[1] Lauke B, Friedrich K. Evaluation of processing parameters of thermoplastic composites fabricated by filament winding[J]. Composites Manufacturing, 1993, 4(2): 93-101.
[2] 蒋凌澜. 树脂基复合材料在航天飞行器气动热防护上的应用研究[J]. 玻璃钢/复合材料, 2014(7): 78-84.
[3] Bae S Y, Kim Y H, Kim K J, et al. Environmental degradation behaviors of glass/carbon fiber-reinforced polymer composites[J]. Journal of Computational and Theoretical Nanoscience, 2008, 5(8): 1758-1762.
[4] Marsh G. Composites lift off in primary aerostructures[J]. Reinforced plastics, 2004, 48(4): 22-27.
[5] 王德禧. 聚苯硫醚的特性及应用[J]. 塑料, 2002, 31(02): 34-38.
[6] Hem-Jin Park, Byoung Chul Chun. Effect of temperture on the mechanical and morphological properties of polypheneylene sulfide composites[J]. Polymer Bulletin, 1996, 37: 103-110.
[7] Anagreh N, Dorn L, Bilke-Krause C. Low-pressure plasma pretreatment of polyphenylene sulfide (PPS) surfaces for adhesive bonding[J]. International Journal of Adhesion and Adhesives, 2008, 28(1): 16-22.
[8] Betanzos F B, Gimeno-Fabra M, Segal J, et al. Cyclic pressure on compression-moulded bioresorbable phosphate glass fibre reinforced composites[J]. Materials & Design, 2016, 100:141-150.
[9] Picher-Martel G P, Levy A, Hubert P. Compression moulding of Carbon/PEEK Randomly-Oriented Strands composites: A 2D Finite Element model to predict the squeeze flow behaviour[J]. Composites Part A Applied Science & Manufacturing, 2016, 81: 69-77.
[10] Sonmez F O, Hahn H T. Analysis of the On-Line Consolidation Process in Thermoplastic Composite Tape Placement[J]. Journal of Thermoplastic Composite Materials, 1997, 10(6): 543-572.
[11] 富宏亚, 韩振宇, 路华. 纤维缠绕/铺带/铺丝成型设备的发展状况[J]. 航空制造技术, 2009(22): 43-46.
[12] Zhao Q, Hoa S V, Gao Z J. Thermal stresses in rings of thermoplastic composites made by automated fiber placement process[J]. Science & Engineering of Composite Materials, 2011, 18(1-2): 35-49.
[13] Stokes-Griffin C M, Compston P. The effect of processing temperature and placement rate on the short beam strength of carbon fibre-PEEK manufactured using a laser tape placement process[J]. Composites Part A Applied Science & Manufacturing, 2015, 78: 274-283.
[14] Wool R P, O'Connor K M. A theory crack healing in polymers[J]. Journal of Applied Physics, 1981, 52(10): 5953-5963.
[15] 周天睿, 方立, 万明, 等. 连续CF增强PEEK复合材料层压板的制备工艺[J]. 工程塑料应用, 2016, 44(7): 52-56.