DESIGN AND SIMULATION OF HANGING FIBER AUTOMATICALLY ON WINDING MACHINE BASED ON CREO AND ADAMS

Fiber Reinforced Plastics/Composites ›› 2017, Vol. 0 ›› Issue (5): 80-83.

• APPLICATION RESEARCH • Previous Articles Next Articles

DESIGN AND SIMULATION OF HANGING FIBER AUTOMATICALLY ON WINDING MACHINE BASED ON CREO AND ADAMS

TIAN Hui-fang, ZHOU Cheng-guang^*, ZHANG Jun-wei

School of Mechanical and Electrical Engineering, Wuhan University of Technology, Wuhan 430070, China

Received:2016-11-30 Online:2017-05-28 Published:2017-05-28

Abstract

Abstract: Based on the summarization of the structure and working principle of the filament winding machine, the problems and shortcomings of the current filament winding machine are found. Then, the design of hanging fiber automatically on winding machine about cylinder is carried out in the modeling software Creo according to the actual production needs. The kinematical properties of the mechanism are obtained by simulating the threading of several common gas cylinder core molds by introducing the model into the ADAMS by MECH/PRO interface. The results show that the design of hanging fiber automatically on filament winding machine can meet the requirements of core mold with various sizes, which is of great significance to solve the problem of low degree of automation in filament winding machine.

Key words: fiber winding machine, hanging fiber automatically, ADAMS, motion simulation

CLC Number:

TB332

TIAN Hui-fang, ZHOU Cheng-guang, ZHANG Jun-wei. DESIGN AND SIMULATION OF HANGING FIBER AUTOMATICALLY ON WINDING MACHINE BASED ON CREO AND ADAMS[J]. Fiber Reinforced Plastics/Composites, 2017, 0(5): 80-83.

References

[1] 贠今天, 刘娇龙. 玻璃纤维缠绕机结构设计和芯模参数化设计[J]. 机械科学与技术, 2015, 34(1): 103-106.
[2] 王瑛琪, 盖登宇, 宋以国. 纤维缠绕技术的现状及发展趋势[J].材料导报, 2011, 25(5): 110-113.
[3] 李海宁, 史耀耀, 赵建钊. 复合材料布铺放缠绕机设计与控制技术研究[J]. 机械科学与技术,2008, 27(7): 966-970.
[4] 许家忠, 杨海, 高良超. 基于机器人的复合材料缠绕策略优化[J]. 复合材料学报, 2016(6): 1318-1326.
[5] 陈志平, 施浒立. 三维实体建模与有限元分析的关系[J]. 电子机械工程, 2002(3): 12-16.
[6] 谢霞, 刘良森. 多向纤维缠绕小样机的研制[J]. 机械设计与制造, 2006(8): 85-87.
[7] 朱镇钟, 张玉华. 基于ADAMS的型钢堆垛机小车机构设计建模与运动仿真[J]. 安徽工业大学学报(自科版), 2007, 24(2): 181-185.
[8] 刘永纯. 新型复合材料成型设备的进展[J]. 纤维复合材料, 2011(1): 33-34.
[9] 王志辉, 文小军, 熊亮. 缠绕机往返小车主轴的有限元分析[J]. 武汉理工大学学报(信息与管理工程版), 2009, 31(6): 926-929.
[10] 尹秀云, 吕贵平. 五轴联动多功能微机控制纤维缠绕机控制系统的设计[J]. 纤维复合材料, 2005, 22(1): 47-49.
[11] 文立伟, 路华, 富宏亚, 等. 六轴联动缠绕机数控系统应用软件的开发[J]. 宇航学报, 2003, 24(3): 295-298.
[12] 韩振宇, 孟庆鑫, 路华, 等. 基于PMAC的六轴纤维缠绕机开发及应用[J]. 哈尔滨工业大学学报, 2007, 39(11): 1799-1802.
[13] 元世海, 李彦虎, 祖磊, 等. 纤维缠绕车载CNG气瓶的结构设计及其有限元分析[J]. 玻璃钢/复合材料, 2015(12): 12-17.
[14] 胡冰, 刘晓静. 纤维缠绕机传动系统计算机设计的研究[J]. 工程塑料应用, 2000, 28(12): 9-11.
[15] 李玉峰, 靳庆臣, 刘志栋. 复合材料高压气瓶的碳纤维缠绕设计和ANSYS分析技术[J]. 推进技术, 2013, 34(7): 968-976.
[16] 蔡金刚, 于柏峰, 杨志忠, 等. 我国纤维缠绕技术及产业发展历程与现状[J]. 玻璃钢/复合材料, 2014(9): 42-51.

DESIGN AND SIMULATION OF HANGING FIBER AUTOMATICALLY ON WINDING MACHINE BASED ON CREO AND ADAMS

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 3

Recommended Articles

Metrics

Comments

[1]	LIN Dong, DONG Jiu-zhi, CHEN Yun-jun, JIANG Xiu-ming. PARAMETRIC DESIGN OF SUTURE HEAD OF COMPOSITE MATERIALPREFORM WITH RIGID SANDWICH STRUCTURE [J]. COMPOSITES SCIENCE AND ENGINEERING, 2021, 0(6): 94-101.
[2]	XU Dong-liang, WANG Cheng, XU Zheng, ZHU Jiong-tao. RESEARCH AND DESIGN OF MULTI-STATION FIBER WINDING MACHINE [J]. Fiber Reinforced Plastics/Composites, 2018, 0(6): 89-93.
[3]	TIAN Hui-fang, LIU Li-jun, CHEN Pei. DESIGN OF SINGLE-SIDE DOUBLE-LINE STITCHING DEVICE FOR COMPOSITES [J]. Fiber Reinforced Plastics/Composites, 2018, 0(2): 83-86.