Advances in fatigue performance of fiber reinforced composite-metal hybrid joints

doi:10.19936/j.cnki.2096-8000.20240928.016

Abstract

Abstract: Fiber-reinforced composites have been widely used in various lightweight applications due to their excellent mechanical properties. In practice, fiber-reinforced composites are required to be connected with other heterogeneous materials such as metals, in which hybrid joints have better mechanical properties than the bonded and traditional mechanical joints. Fatigue life is the key to the service performance of fiber-reinforced composite-metal hybrid joints. This paper studies the fatigue performance of various components of hybrid joints, discusses the fatigue life prediction methods and the important factors affecting the fatigue performance of hybrid joints. Furthermore, the development trend of hybrid joints is summarized and prospected.

Key words: fiber-reinforced composites, metal, hybrid composite joint, fatigue performance, life prediction

CLC Number:

TB332

SONG Jianhui, YU Xiaochen, ZHU Yingdan, WU Huaping, ZHANG Xiongjun, CHEN Gang. Advances in fatigue performance of fiber reinforced composite-metal hybrid joints[J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 105-112.

References

[1] 吴连竟. GFRP层合板的连接性能研究[D]. 哈尔滨: 哈尔滨工程大学, 2018.
[2] EL ZAROUG M, KADIOGLU F, DEMIRAL M, et al. Experimental and numerical investigation into strength of bolted, bonded and hybrid single lap joints: Effects of adherend material type and thickness[J]. International Journal of Adhesion and Adhesives, 2018, 87: 130-141.
[3] DI FRANCO G, ZUCCARELLO B. Analysis and optimization of hybrid double lap aluminum-GFRP joints[J]. Composite Structures, 2014, 116: 682-693.
[4] MARQUES G, CAMPILHO R, DA SILVA F, et al. Adhesive selection for hybrid spot-welded/bonded single-lap joints: Experimentation and numerical analysis[J]. Composites Part B: Engineering, 2016, 84: 248-257.
[5] XU P, ZHOU Z, LIU T, et al. A novel double-spring analytical model for hybrid GLARE joints: Model development, validation, parameter study and global sensitivity analysis[J]. International Journal of Mechanical Sciences, 2020, 177: 105606.
[6] ARMENTANI E, LAISO M, CAPUTO F, et al. Numerical FEM evaluation for the structural behaviour of a hybrid (bonded/bolted) single-lap composite joint[J]. Procedia Structural Integrity, 2018, 8: 137-153.
[7] CHOWDHURY N M, WANG J, CHIU W K, et al. Static and fatigue testing bolted, bonded and hybrid step lap joints of thick carbon fibre/epoxy laminates used on aircraft structures[J]. Composite Structures, 2016, 142: 96-106.
[8] GAMDANI F, BOUKHILI R, VADEAN A. Fatigue behavior of hybrid multi-bolted-bonded single-lap joints in woven composite plates[J]. International Journal of Fatigue, 2022, 158: 106738.
[9] 程小全, 杜晓渊. 纤维增强复合材料疲劳寿命预测及损伤分析模型研究进展[J]. 北京航空航天大学学报, 2021, 47(7): 1311-1322.
[10] SHOKRIEH M M, LESSARD L B. Progressive fatigue damage modeling of composite materials, Part Ⅰ: Modeling[J]. Journal of Composite Materials, 2000, 34(13): 1056-1080.
[11] 周银华. 非线性本构在复合材料多钉螺栓连接结构中的应用[D]. 西安: 西北工业大学, 2016.
[12] 侯赤, 周银华, 全泓玮, 等. 混合结构中金属疲劳对层合板损伤的影响[J]. 西北工业大学学报, 2018, 36(1): 74-82.
[13] 周泉, 马可. 混凝土疲劳性能研究综述[J]. 混凝土与水泥制品, 2023, 322(2): 28-32, 37.
[14] 陈震. 金属材料缺口件疲劳寿命预测方法研究[D]. 秦皇岛: 燕山大学, 2019.
[15] 苏睿. 复合材料—钛合金机械连接结构疲劳寿命预测研究[D]. 上海: 上海交通大学, 2013.
[16] 黄申. SiCp/Al复合材料结构疲劳强度与疲劳寿命预测模型研究[D]. 南京: 南京航空航天大学,2021.
[17] SUSMEL L. The theory of critical distances: A review of its applications in fatigue[J]. Engineering Fracture Mechanics, 2008, 75(7): 1706-1724.
[18] LI S, THOULESS M, WAAS A, et al. Competing failure mechanisms in mixed-mode fracture of an adhesively bonded polymer-matrix composite[J]. International Journal of Adhesion, 2006, 26(8): 609-616.
[19] 周建君. 结构胶-自冲铆混合连接工艺与力学性能研究[D]. 合肥: 合肥工业大学, 2019.
[20] 陈志颖. 基于内聚力模型的钢-铝接头结合界面强度研究[D]. 大连: 大连理工大学, 2020.
[21] ROE K, SIEGMUND T. An irreversible cohesive zone model for interface fatigue crack growth simulation[J]. Engineering Fracture Mechanics, 2003, 70(2): 209-232.
[22] PEERLINGS R H, BREKELMANS W M, DE BORST R, et al. Gradient-enhanced damage modelling of high-cycle fatigue[J]. International Journal for Numerical Methods in Engineering, 2000, 49(12): 1547-1569.
[23] SHAN M,LIU F,YANG W, et al. Uncertainty evaluation for bearing fatigue property of CFRP double-lap, single-bolt joints[J]. Chinese Journal of Aeronautics, 2022, 35(3): 250-258.
[24] GERENDT C, DEAN A, MAHRHOLZ T, et al. On the progressive fatigue failure of mechanical composite joints: Numerical simulation and experimental validation[J]. Composite Structures, 2020, 248:
112488.
[25] 安子乾, 舒茂盛, 程羽佳, 等. 3钉带衬套复合材料/金属接头拉伸疲劳性能[J]. 材料工程, 2021(49): 164-174.
[26] 郭倩. 纤维金属层板铆接疲劳特性的研究[D]. 天津: 天津科技大学, 2020.
[27] HOU C, QIAO J, WANG W, et al. Fatigue failure simulation of a double-lap composites-metal bolted joint structure[J]. Mechanics of Advanced Materials and Structures, 2023, 30(1): 99-113.
[28] ZHANG H, ZHANG L, LIU Z, et al. Numerical analysis of hybrid (bonded/bolted) FRP composite joints: A review[J]. Composite Structures, 2021, 262: 113606.
[29] 张峻瑞, 郑锡涛, 袁林, 等. 基于损伤权重的混合多钉连接件疲劳寿命预测方法[J]. 航空学报, 2021, 42(5): 263-271.
[30] PRESSE J, KUNKLER B, MICHLER T. Stress-based approach for fatigue life calculation of multi-material connections hybrid joined by self-piercing rivets and adhesive[J]. Thin-Walled Structures, 2021, 159: 107192.
[31] PRESSE J, MICHLER T, KÜNKLER B. Fatigue life performance of multi-material connections hybrid joined by self-piercing rivets and adhesive[J]. Materials Testing, 2020, 62(10): 973-978.
[32] ZHANG H, SONG Z, ZHANG L, et al. Effect of hygrothermal environment on the fatigue fracture mechanism of single lap Aluminum-CFRP hybrid (riveted/bonded) joints[J]. International Journal of Fatigue, 2022, 165: 107177.
[33] AKTAS A, DIRIKOLU M H. The effect of stacking sequence of carbon epoxy composite laminates on pinned-joint strength[J]. Composite Structures, 2003, 62(1): 107-111.
[34] 郑艳萍, 李明坤, 熊勇坚, 等. 复合材料双钉胶-螺混合连接结构参数对失效载荷的影响[J]. 复合材料科学与工程, 2021(4): 18-27.
[35] ESMAEILI F, ZEHSAZ M, CHAKHERLOU T N. Investigation the effect of tightening torque on the fatigue strength of double lap simple bolted and hybrid (bolted-bonded) joints using volumetric method[J]. Materials & Design, 2014, 63: 349-359.
[36] CHAKHERLOU T N, ZEHSAZ M, SAMAEI M. Experimental investigation of the effects of clamping force on the fatigue life and fatigue crack growth of single lap simple bolted and hybrid (Bolted/Adhesive) Joints[J]. Transactions of the Indian Institute of Metals, 2016, 69(7): 1335-1341.
[37] CHAKHERLOU T, ABAZADEH B, VOGWELL J. The effect of bolt clamping force on the fracture strength and the stress intensity factor of a plate containing a fastener hole with edge cracks[J]. Engineering Failure Analysis, 2009, 16(1): 242-253.
[38] SAMAEI M, ZEHSAZ M, CHAKHERLOU T N. Experimental and numerical study of fatigue crack growth of aluminum alloy 2024-T3 single lap simple bolted and hybrid (adhesive/bolted) joints[J]. Engineering Failure Analysis, 2016, 59: 253-268.
[39] 刘志明, 许昶. 胶层厚度对碳纤维/双马来酰亚胺树脂复合材料平-折-平混合连接接头力学性能的影响[J]. 复合材料学报, 2020, 37(11): 2825-2832.
[40] ZHANG H, ZHANG L, LIU Z, et al. Research in failure behaviors of hybrid single lap aluminum-CFRP (plain woven) joints[J]. Thin-Walled Structures, 2021, 161: 107488.
[41] 黄文俊, 程小全, 武鹏飞, 等. 复合材料混合连接结构拉伸性能与影响因素分析[J]. 北京航空航天大学学报, 2013(39): 1408-1413.
[42] MAGGIORE S, BANEA M D, STAGNARO P, et al. A review of structural adhesive joints in hybrid joining processes[J]. Polymers, 2021, 13(22): 3961.
[43] DELZENDEHROOY F, AKHAVAN-SAFAR A, BARBOSA A, et al. A comprehensive review on structural joining techniques in the marine industry[J]. Composite Structure, 2022, 289: 115490.
[44] GEIGLOU Z E, CHAKHERLOU T N. Numerical and experimental investigation of the effect of the cold expansion process on the fatigue behavior of hybrid (bonded-bolted) double shear lap aluminum joints[J]. International Journal of Fatigue, 2019, 126: 30-43.
[45] MARIAM M, AFENDI M, MAJID M A, et al. Hydrothermal ageing effect on the mechanical behaviour and fatigue response of aluminium alloy/glass/epoxy hybrid composite single lap joints[J]. Composite Structures, 2019, 219: 69-82.