Research progress and prospect of continuous carbon fiber reinforced metal matrix composites

doi:10.19936/j.cnki.2096-8000.20221028.017

Abstract

Abstract: Continuous carbon fiber reinforced metal matrix composites have excellent comprehensive properties such as light weight, high specific strength,high specific modulus, corrosion resistance, tensile resistance, etc., and are developing rapidly in the field of new materials. In this paper, the research progress of continuous carbon fiber reinforced magnesium-based, aluminum-based, nickel-based and copper-based composites is summarized, and it is pointed out that the interface problem is the main problem at present, and corresponding research ideas are given for key technical difficulties, such as starting with the research of fiber coating, the interface reaction between fiber and matrix, and strengthening the research of damage mechanism of composites in this field. Finally, a new technological idea of manufacturing continuous carbon fiber reinforced metal matrix composites by laser reinforcement is put forward, and the present technological research status and preliminary experimental exploration are discussed. Finally, it is pointed out that the advanced manufacturing technology has advantages in reducing the preparation cost of composite materials, improving the interface strength and increasing the structural complexity of parts.

Key words: continuous carbon fiber, metal matrix composites, research progress, laser additive manufacturing, advanced manufacturing

CLC Number:

TB332

CHENG Xiao-le, PENG Yao, YANG Lei-peng, LÜ Shu-ting, ZHANG Dong, LI Yu, XIE Wang. Research progress and prospect of continuous carbon fiber reinforced metal matrix composites[J]. COMPOSITES SCIENCE AND ENGINEERING, 2022, 0(10): 119-128.

References

[1] SHIRVANIMOGHADDAM K, HAMIM S U, AKBARI M K, et al. Carbon fiber reinforced metal matrix composites: Fabrication processes and properties[J]. Composites Part A, 2017, 92: 70-96.
[2] 石川, 雷剑波, 周圣丰, 等. 连续纤维增强金属基复合材料研究进展及其激光熔覆[J]. 激光与光电子学进展, 2017, 54(6): 30-40.
[3] 李佩桓, 张勇, 王涛, 等. 连续SiC纤维增强金属基复合材料研究进展[J]. 材料工程, 2016, 44(8): 121-129.
[4] 王军, 严彪, 徐政. 金属基复合材料的发展和未来[J]. 上海有色金属, 1999(4): 188-192.
[5] LIANG H W, LIU J W, QIAN H S, et al. Multiplex templating process in one-dimensional nanoscale: Controllable synthesis, macroscopic assemblies, and applications[J]. Accounts of chemical research, 2013, 46(7): 1450-1461.
[6] LIANG H W, ZHANG W J, MA Y N, et al. Highly active carbonaceous nanofibers: A versatile scaffold for constructing multifunctional free-standing membranes[J]. ACS Nano, 2011, 5(10): 8148-8161.
[7] 郭玉明, 冯志海, 等. 高性能PAN基碳纤维及其复合材料在航天领域的应用[J]. 高科技纤维与应用, 2007(5): 1-7, 17.
[8] 朱和文, 张爱文. 复合材料原理[M]. 北京: 国防工业出版社, 2013.
[9] 郝元恺, 肖加余. 高性能复合材料学[M]. 北京: 化学工业出版社, 2004.
[10] 许丽丹, 王澜. 碳纤维增强树脂基复合材料的应用研究[J]. 塑料制造, 2007(Z1): 81-85.
[11] GOMZIN A I, GALLYAMOVA R F, ZARIPOV N G, et al. The chemical reactivity comparison of high-modulus and high-strength carbon fibers[J]. Materials Science Forum, 2020, 5940: 347-352.
[12] 蒋诗才, 李伟东, 李韶亮, 等. PAN基高模量碳纤维及其应用现状[J]. 高科技纤维与应用, 2020, 45(2): 1-10.
[13] 钱伯章. M60J高强高模碳纤维关键制备技术获突破[J]. 合成纤维, 2018, 47(4): 53.
[14] 中科院宁波材料所. 高强高模碳纤维国产化制备技术取得重大突破[J]. 高科技纤维与应用, 2016, 41(1): 79.
[15] 马祥林. 高强高模碳纤维产业化项目签约[J]. 合成纤维工业, 2015, 38(3): 66.
[16] WEN Y, LU Y G, XIAO H, et al. Further investigation on boric acid catalytic graphitization of polyacrylonitrile carbon fibers: Mechanism and mechanical properties[J]. Materials and Design, 2011, 36: 728-734.
[17] 沈曾民, 迟伟东, 张学军, 等. 高模量碳纤维的现状及发展(1)[J]. 高科技纤维与应用, 2010, 35(3):5-13.
[18] 李东风, 王浩静, 薛林兵, 等. PAN基碳纤维连续石墨化过程中的取向性[J]. 化工进展, 2006(9): 1101-1104, 1109.
[19] 沃西源. 国内外几种碳纤维性能比较及初步分析[J]. 高科技纤维与应用, 2000(2): 30-36.
[20] 王燕, 朱晓林, 朱宇宏, 等. 金属基复合材料概述[J]. 中国标准化, 2013(5): 33-37, 47.
[21] 李玲玲. 金属基复合材料的制备技术与运用[J]. 科技风, 2012(12): 73-76, 82.
[22] 陈素玲, 孙学杰. 金属基复合材料的分类及制造技术研究进展[J]. 电焊机, 2011, 41(7): 90-94.
[23] 关明, 常志梁. 金属基复合材料制备技术的进展[J]. 热加工工艺, 2010, 39(16): 93-95.
[24] 朱和国, 张爱文. 复合材料原理[M]. 北京: 国防工业出版社, 2013: 192-193.
[25] 刘晨曦, 于惠舒, 张楠楠, 等. 碳纤维增强铝基复合材料的研究现状[J]. 钢铁研究学报, 2021, 33(12): 1205-1218.
[26] DUCHOSLAV J, UNTERWEGER C, STEINBERGER R, et al. Investigation on the thermo-oxidative stability of carbon fiber sizings for application in thermoplastic composites[J]. Polymer Degradation and Stability, 2016, 125: 33-42.
[27] 刘献华. 不同结构碳增强铝基复合材料的制备及组织性能研究[D]. 合肥: 合肥工业大学, 2013.
[28] WANG Y, HAHN T H. AFM characterization of the interfacial properties of carbon fiber reinforced polymer composites subjected to hygrothermal treatments[J]. Composites Science and Technology, 2007, 67(1): 92-101.
[29] 成小乐, 尹君, 屈银虎, 等. 连续碳化硅纤维增强钛基(SiC_f/Ti)复合材料的制备技术及界面特性研究综述[J]. 材料导报, 2018, 32(5): 796-807.
[30] 王涛, 赵宇新, 付书红, 等. 连续纤维增强金属基复合材料的研制进展及关键问题[J]. 航空材料学报, 2013, 33(2): 87-96.
[31] WARD-CLOSE C M, CHANDRASEKARAN L, ROBERTSON J G, et al. Advances in the fabrication of titanium metal matrix composite[J]. Materials Science and Engineering: A, 1999, 263(2): 314-318.
[32] 郭洪波, 彭立全, 宫声凯, 等. 电子束物理气相沉积热障涂层技术研究进展[J]. 热喷涂技术, 2009, 1(2): 7-14.
[33] 关春龙, 李垚, 赫晓东. 电子束物理气相沉积技术及其应用现状[J]. 航空制造技术, 2003(11): 35-37.
[34] SUBRAMANIAN P R,KRISHNAMURTHY S, KELLER S T, et al. Processing of continuously reinforced Ti-alloy metal matrix composites (MMC) by magnetron sputtering[J]. Materials Science and Engineering: A, 1998, 244(1): 1-10.
[35] MORTENSEN A, FLEMINGS M C. Solidification of binary hypoeutectic alloy matrix composite castings[J]. Metallurgical and Materials Transactions A, 1996, 27(3): 595-609.
[36] 任富忠, 高家诚, 李伟, 等. 粉末冶金法炭纤维/Mg复合材料的界面对其力学性能的影响[J]. 新型炭材料, 2011, 26(4): 278-286.
[37] 赵慧锋, 夏存娟, 马乃恒, 等. 涂层碳纤维增强镁基复合材料[J]. 热加工工艺, 2007(12): 37-39.
[38] 崔华, 郝斌, 张济山. 金属基复合材料制备中有害界面反应的控制和润湿性的改善工艺[J]. 铸造, 2006(8): 817-820.
[39] VIJAYARAM T R, SULAIMAN S, HAMOUDA A M S, et al. Fabrication of fiber reinforced metal matrix composites by squeeze casting technology[J]. Journal of Materials Processing Tech, 2005, 178(1): 1-5.
[40] KÖRNER C, SCHÄFF W, OTTMÜLLER M, et al. Carbon long fiber reinforced magnesium alloys[J]. Advanced Engineering Materials, 2000, 2(6): 327-337.
[41] DOHNOMOTO TADASHI, TANAKA ATSUO. Composite material with carbon reinforcing fibers and magnesium alloy matrix including zinc: DE3578829[P]. 1990-8-30.
[42] 宋美慧, 武高辉, 王宁, 等. C_f/Mg复合材料热膨胀系数及其计算[J]. 稀有金属材料与工程, 2009, 38(6): 1043-1047.
[43] WANG W G, XIAO B L, MA Z Y. Evolution of interfacial nanostructures and stress states in Mg matrix composites reinforced with coated continuous carbon fibers[J]. Composites Science and Technology, 2011, 72(2): 152-158.
[44] 李坤, 裴志亮, 宫骏, 等. 碳纤维表面SiO₂涂层的制备及其在镁基复合材料中的应用[J]. 金属学报, 2007(12): 1282-1286.
[45] 赵慧锋, 夏存娟, 马乃恒, 等. 涂层碳纤维增强镁基复合材料[J]. 热加工工艺, 2007(12): 37-39.
[46] 王浩伟, 商宝禄, 郑来苏, 等. 涂层碳纤维增强镁基复合材料[J]. 复合材料学报, 1992(2): 73-76.
[47] 李是捷, 周海涛, 应韬, 等. 表面涂覆对碳纤维镁基复合材料组织与性能的影响[J]. 铸造技术, 2021, 42(2): 69-74, 84.
[48] 孙振明, 胡小石, 张春雷, 等. 连续碳纤维增强镁基复合材料制备工艺研究[J]. 上海航天, 2019, 36(2): 60-65.
[49] FELDHOFF A, PIPPEL E, WOLTERDORF J. Interface engineering of carbon-fiber reinforced Mg-Al alloys[J]. Advanced Engineering Materials, 2000, 2(8): 471-480.
[50] 李廷举, 刘嘉鸣, 杨茜, 等. 碳纤维增强铝基复合材料制备及强化机制研究进展[J]. 特种铸造及有色合金, 2020, 40(11): 1177-1181.
[51] 杨波, 于杰. 碳纤维增强铝基复合材料的研究进展[J]. 热加工工艺, 2016, 45(8): 16-18.
[52] 刘艺, 王华. 连续碳纤维增强铝基复合材料的制备与性能研究[J]. 铸造技术, 2018, 39(6): 1202-1204.
[53] 武高辉, 张云鹤, 陈国钦, 等. 碳纤维增强铝基复合材料及其构件的空间环境特性[J]. 载人航天, 2012, 18(1): 73-76, 82.
[54] ALHASHMY H A, NGANBE M. Laminate squeeze casting of carbon fiber reinforced aluminum matrix composites[J]. Materials and Design, 2015, 67: 154-158.
[55] 刘连涛, 孙勇. 纤维增强铝基复合材料研究进展[J]. 南方金属, 2008(6): 1-4, 47.
[56] XU P, YU Y H, LIU D W, et al. Enhanced interfacial and mechanical properties of high-modulus carbon fiber composites: Establishing modulus intermediate layer between fiber and matrix based on tailored-modulus epoxy[J]. Composites Science and Technology, 2018, 163: 26-33.
[57] SHACKELFORD J F, HAN Y-H, KIM S, et al. CRC materials science and engineering handbook[M]. CRC Press, 2016.
[58] TOWATA S, YAMADA S, OHWAKI T. Strength and interfacial reaction of high modulus carbon fiber-reinforced aluminum alloys[J]. Transactions of the Japan Institute of Metals, 1985, 26(8): 563-570.
[59] 吕钊钊, 祖宇飞, 沙建军, 等. 含Cu界面层碳纤维增强铝基复合材料制备工艺及其力学性能研究[J]. 金属学报, 2019, 55(3): 317-324.
[60] ZHANG J J, LIU J M, LU Y P, et al. Infiltration behavior and mechanism in semi-solid rolling of carbon fibers reinforced Al-matrix composite[J]. Materials and Design, 2019, 182(C): 917-932.
[61] 田书荣, 钱王欢. 柔性受压电铸制备连续碳纤维增强镍基复合材料[J]. 电镀与涂饰, 2019, 38(9): 411-416.
[62] 刘建秀, 宋阳, 樊江磊, 等. 碳纤维增强铜基复合材料研究进展[J]. 材料科学与工程学报, 2018, 36(2): 342-346, 240.
[63] 欧阳雯婧. 表面改性碳纤维增强铜基复合材料的制备与表征[D]. 兰州: 兰州理工大学, 2016.
[64] 李小红, 黎业生, 钟涛生. 冷压烧结法制备碳纤维增强铜基复合材料的研究[J]. 粉末冶金工业, 2014, 24(4): 40-44.
[65] 马光, 王轶, 李银娥, 等. Cu/C复合材料的研究现状[J]. 稀有金属快报, 2007(12): 6-10.
[66] KORB G, KORÁB J, GROBOTH G. Thermal expansion behaviour of unidirectional carbon-fibre-reinforced copper-matrix composites[J]. Composites Part A, 1998, 29(12): 1563-1567.
[67] 钟涛生, 李小红, 王燕齐. 纤维状态对碳纤维-铜基复合材料性能的影响[J]. 电镀与精饰, 2015, 37(1): 1-4.
[68] 赵晓宏. 连续碳纤维增强铜基复合材料的制备、组织及性能研究[D]. 天津: 河北工业大学, 2002.
[69] SHALU T, ABHILASH E, JOSEPH M A. Development and characterization of liquid carbon fibre reinforced aluminium matrix composite[J]. Journal of Materials Processing Tech, 2008, 209(10): 4809-4813.
[70] NADER A. Metal additive manufacturing-state of the art 2020[J]. Metals, 2021, 11(6): 867.
[71] PAUL C P, JINOOP A N, KUMAR A, et al. Laser-based metal additive manufacturing: Technology, global scenario and our experiences[J]. Transactions of the Indian National Academy of Engineering, 2021, 6(4): 895-908.
[72] PRAGANA J P M, SAMPAIO R F V, BRAGANÇAI M F, et al. Hybrid metal additive manufacturing: A state-of-the-art review[J]. Advances in Industrial and Manufacturing Engineering, 2021 (prepublish): 1.
[73] 宋建丽, 李永堂, 邓琦林, 等. 激光熔覆成形技术的研究进展[J]. 机械工程学报, 2010, 46(14): 29-39.
[74] ZHANG Y H, LI Y, LU W Z, et al. Microstructure and elevated temperature mechanical properties of IN718 alloy fabricated by laser metal deposition[J]. Materials Science and Engineering: A, 2020, 771(C): 138580.
[75] XUE A T, LIN X, WANG L L, et al. Influence of trace boron addition on microstructure, tensile properties and their anisotropy of Ti6Al4V fabricated by laser directed energy deposition[J]. Materials and Design, 2019, 181: 107943.
[76] HU Y L, LIN X, ZHANG S Y, et al. Huang. Effect of solution heat treatment on the microstructure and mechanical properties of Inconel 625 superalloy fabricated by laser solid forming[J]. Journal of Alloys and Compounds, 2018, 767: 330-344.
[77] XU J J, LIN X, GUO P F, et al. The effect of preheating on microstructure and mechanical properties of laser solid forming IN-738LC alloy[J]. Materials Science and Engineering: A, 2017, 691: 71-80.
[78] 齐林森. B元素对铁基合金激光成形试样组织与性能的影响[D]. 衡阳: 南华大学, 2017.
[79] ZHU Y Y, LIU D, TIAN X J, et al. Characterization of microstructure and mechanical properties of laser melting deposited Ti-65Al-3.5Mo-1.5Zr-0.3Si titanium alloy[J]. Materials and Design, 2013, 56: 445-453.
[80] YU J, ROMBOUTS M, MAES G, et al. Material properties of Ti6Al4 V parts produced by laser metal deposition[J]. Physics Procedia, 2012, 39: 416-424.
[81] ZHANG Y Z, WEI Z M, SHI L K, et al. Characterization of laser powder deposited Ti-TiC composites and functional gradient materials[J]. Journal of Materials Processing Tech, 2007, 206(1): 438-444.
[82] GORUNOV A I. Investigation microstructure of carbon fibers reinforced composite on Fe and Ni-based obtained by laser metal deposition[J]. Surface and Coatings Technology, 2019, 364: 279288.
[83] LEI J B, SHI C, ZHOU S F, et al. Enhanced corrosion and wear resistance properties of carbon fiber reinforced Ni-based composite coating by laser cladding[J]. Surface and Coatings Technology, 2018, 334: 274-285.