DISCUSSION ON THE APPLICATION OF PFMEA IN THE BONDING PROCESS OF OFF-SHORE BLADE

Abstract

Abstract: During the early design development stage of off-shore blade, fully identify potential failures, draw up and validate control measure is an important measure to design development blade. This paper introduced the samples of PFMEA applications on off-shore blade design and development. By analyzing the potential failure causes, it is found that the bonding adhesive shape design and bonding interface treatment was the root cause of the adhesive voids, bubbles and other defects in the TE bonding area. Through the NDT (Non-destructive testing), the reliability of the bonding adhesive shape and bonding interface treatment were verified, which effectively control the risk of product development.

Key words: PFMEA, off-shore blade, design development, bonding

CLC Number:

TB332

ZHAO Li-yan, LIU Yan, XU You-mu, JIANG Yue. DISCUSSION ON THE APPLICATION OF PFMEA IN THE BONDING PROCESS OF OFF-SHORE BLADE[J]. Fiber Reinforced Plastics/Composites, 2019, 0(4): 58-61.

References

[1] 龙飞, 朱斌, 王英昊. 航空电子产品装配中PFMEA方法的应用和改进. 航空电子技术, 2016(1): 36-40.
[2] 通用汽车公司. 失效模式与后果分析. 美国: 通用汽车公司, 2008.
[3] 刘卫东, 胡坤, 郑慧萌, 等. 多品种小批量定制生产模式的工艺失效模式及影响分析. 计算机集成造系统, 2016(6): 1485-1439.
[4] 王维志, 陈建国. 面向FMEA风险顺序数排序研究. 现代机械, 2012(2): 12-14.
[5] 陈勇飞. FMEA简介. 机械工程师, 2002(1): 31-35.
[6] Kania A, Roszak M, Spilka M. Evaluation of FMEA methods used in the environmental management. Archives of Materials Science and Engineering, 2014(1): 37-44.
[7] Teng S G, Michael S, Shumar H D. Implementing FMEA in a collaborative supply chain environment. International Journal of Quality & Reliability Management, 2006(2/3): 179-196.
[8] Jegadheesan C, Arunachalam V P, Devadasan S R, et al. Design and development of modified service failure mode and effects analysis model. International Journal of Services and Operations Management, 2007(1): 111-126.
[9] Johnson K G, Khan M K. A study into the use of the process failure mode and effects analysis (PFMEA) in the automotive industry in the UK. Journal of Materials Processing Technology, 2003(1/3): 348-356.
[10] 庞晓锋. 浅谈PFMEA在制造过程中的应用. 机械制造, 2016(2): 93-96.
[11] 高波, 王辉, 郭玉新. PFMEA在工艺制造和质量控制中的应用及意义. 科技创新与生产力, 2014(8): 89-90.
[12] 刘卫东, 胡坤, 康密军, 等. 小批量定制生产模式计算机辅助PFMEA技术的实现. 机械设计与制造, 2016(12): 260-262, 266.
[13] 徐云云, 孙宗弟, 赵旭磊. 过程潜在失效模式及后果分析(PFMEA)在汽车制造业中的应用分析. 企业科技与发展, 2015(3): 21-23.
[14] 刘鲜红. 超声波无损检测在风电叶片粘接部位缺陷检测中的应用研究. 建筑工程技术与设计, 2016(22): 2848-2848.
[15] 安静, 徐宇, 张淑丽, 等. 超声波技术用于风电叶片粘结区域检测的探究. 玻璃钢/复合材料, 2015(3): 50-53.