AUTOMATED FIBER PLACEMENT AND ITS APPLICATION IN AIRCRAFT COMPOSITE PARTS

Abstract

Abstract: Automated fiber placement, as an advanced automated manufacturing technology, is applied more and more widely because of its more placement flexibility and lower scrap, and broaden the application of composites enormously. This paper introduces the materials, processing software of automated fiber placement, the application of composite parts in aviation, and then gives the development trend of this technology.

Key words: automated fiber placement, material, process, application, fuselage, wing

CLC Number:

TB332

YAN Chao, CHEN Ping. AUTOMATED FIBER PLACEMENT AND ITS APPLICATION IN AIRCRAFT COMPOSITE PARTS[J]. Fiber Reinforced Plastics/Composites, 2017, 0(11): 101-105.

References

[1] 赵聪, 陆楠楠, 等. 自动铺丝用预浸丝制备工艺研究[J] . 固体火箭技术, 2014, 5(37): 718-723.
[2] H Girardy, JM Beraud. HiTape (R) Dry Preform Technology-An Efficient Composite Automation Technology for Primary Aircraft Structures[J] . Sampe Journal, 2015, 51(4): 7-15.
[3] A Hawkes. Hexcel at CAMX 2015[J] . Reinforced Plastics, 2016, 60(1): 45-49.
[4] G Gardiner. Resin-infused MS-21 wings and wingbox[J] . High-Performance Composites, 2014(1): 29-31.
[5] D Kumar, MG Ko, et al. AFP mandrel development for composite aircraft fuselage skin[J] . International Journal of Aeronautical & Space Sciences, 2014, 15(1): 32-43.
[6] 黄新杰, 肖军, 等. 自动铺丝成型工艺参数优化[J] . 玻璃纤维, 2015(6): 20-26.
[7] 孙成. 复合材料翼梁自动铺丝技术研究[D] . 南京: 南京航空航天大学, 2013.
[8] 段玉岗, 刘芬芬, 陈耀, 等. 纤维铺放压紧力及预浸带加热温度对复合材料力学性能的影响[J] . 复合材料学报, 2012, 29(4): 148-156.
[9] 赵聪, 肖军, 王显峰, 等. 丝束张力对自动铺丝成型工艺的影响[J] . 航空学报, 2016, 37(4): 1384-1392.
[10] MP Wiehn, RD Hale. Low cost robotic fabrication methods for tow placement[J] . International SAMPE Symposium and Exhibition, 2002, 47(2): 1842-1852.
[11] M Engineers. Manufacturing Processes For Advanced Composites[M] . Elsevier, 2004: 162.
[12] Shirinzadeh B, Alici G, et al. Fabrication Process of Open Surfaces by Robotic Fiber Placement[J] . Robotics and Computer-integrated Manufacturing, 2004, 20(1): 17-28.
[13] Hyer M W, Charette R F. Use of curvilinear fiber format in composite structure design[J] . AIAA Journal, 2012, 29(6): 1011-1015.
[14] Hale R D, Vasey-glandon V M. Fiber placement and fiber steering systems and corresponding software for composite structures: US6799081[P] . 2004-9-28.
[15] 池召艳, 周晓芹. 国外复合材料纤维自动铺放编程软件的功能特点及分析[J] . 航空制造技术, 2014(12): 64-67.
[16] 曾伟, 肖军. 复合材料自动铺丝轨迹规划与覆盖性分析研究[D] . 南京: 南京航空航天大学, 2010.
[17] 杨帆. 基于CATIA的自动铺丝机运动仿真系统开发[D] . 哈尔滨: 哈尔滨工业大学, 2013.
[18] 石林. 自动铺丝束在航空工业中的应用现状[J] . 航空工程与维修, 1997 (9): 11-13.
[19] Dale Brosius. Boeing 787 Update[J] . High-performance Composites, 2007(5): 21-23.
[20] Ginger Gardiner. A350 XWB Update: Smart Manufacturing[J] . High-Performance Composites, 2011(9): 11-14.
[21] George Marsh. Automating aerospace composites production with fibre placement[J] . Reinforced Plastics, 2011, 55(3): 32-37.
[22] 张朝晖, 周旗. 自动化设备和生产线在飞机复合材料零件制造中的应用[J] . 航空制造技术, 2013, 435(15): 51-54.
[23] 严飙, 肖军, 等. 浸纤维丝束自动搭接方法与系统[J] . 南京航空航天大学学报, 2013, 45(2): 250-254.