PROGRESSINNG IN THE RESEARCH ON MECHANICAL PROPERTIESOF 3D BRAIDED COMPOSITES

Abstract

Abstract: The research status of mechanical properties of three-dimensional braided composites is reviewed. The research methods can be summarized as follows: the study on the micro structures of fiber distribution, internal structure geometry and interfacial interaction, finite element analysis software to predict its mechanical properties and experimental study on mechanical properties. The study of the microscopic structure is mainly about the establishment of the single cell geometry model and the relationship between the braiding process and the cell structure model. The finite element method is mainly focused on the mechanical analysis and the stiffness strength performance prediction of the meso-structure model by finite element software and the equivalent elastic performance parameters of the material are obtained. The experimental study is to study the tensile properties, flexural properties and fatigue properties of the material. The effects of braided process parameters and temperature on the mechanical properties were analyzed. Finally, the problems existing in the current research and future development trends are prospected.

Key words: 3D braided composites, modeling, mechanical properties

CLC Number:

TB332

SONG Yun-fei, DU Yu. PROGRESSINNG IN THE RESEARCH ON MECHANICAL PROPERTIESOF 3D BRAIDED COMPOSITES[J]. Fiber Reinforced Plastics/Composites, 2017, 0(10): 104-109.

References

[1] 李嘉禄. 三维编织技术和三维编织复合材料[J]. 新材料产业, 2010, 194(1): 46-49.
[2] Mouritz A P, Bannister M K, Falzon P J, et al. Review of applications for advanced three-dimensional fibre textile composites[J]. Composites Part A,1999, 30(12): 1445-1461.
[3] Mahmood A, Wang X W, Zhou C W. Modeling strategies of 3D woven composites: a review[J]. Composites Structures, 2011, 93(8): 1947-1963.
[4] Dian S L, Lu Z X, Jiang N, et al. High strain rate behavior and failure mechanism of three-dimensional five-directional carbon/phenolic braided composites under transverse compression[J]. Composites Part B, 2011, 42(2): 309-317.
[5] Joon H Y, Byun, Tsu Wei chou. Process-Microstructure Relationships of 2-Step and 4-Step Braided composites[J]. Composite Science and Technology, 1996, 156: 235-251.
[6] Du G W, Frank K. Unit cell geometry of 3-D braided structures[J].Journal of Reinforced Plastics and Composites,1993, 12(7): 752-768.
[7] Soheil Mohajerjashi. More on the fiber architecture of 3-D braided composites: AIAA-97-1404[R]. 1997.
[8] Zhang F, Liu Z G, Wu Z, et al. A new scheme and microstructural model for 3D full 5-directional braided conposites[J]. Chinese Journal of Aeronautics, 2010, 23(1): 61-67.
[9] 刘振国. 三维全五向编织预型件的概念[J]. 材料工程, 2008(S1): 305-312.
[10] 皮秀标, 钱坤, 曹海建, 等. 三维全五向编织复合材料的细观结构分析[J]. 宇航材料工艺, 2012(6): 39-43.
[11] 刘振国, 亚纪轩, 林强. 三维全五向编织复合材料细观结构实验分析[J]. 北京航空航天大学学报, 2016, 42(2): 211-217.
[12] 巩龙东, 申秀丽. 基于能量法的三维四向编织复合材料细观建模[J]. 航空动力学报, 2015, 30(1): 106-113.
[13] Sun H Y, Di S L, Zhang N, et al. Micromechanics of braided composites via multivariable FEM[J]. Composite and Structures, 2003, 81(20): 2021-2027.
[14] 庞宝君, 曾涛, 杜善义. 三维多向编织复合材料有效弹性模量的细观计算力学分析[J]. 计算力学学报, 2001, 18(2): 231-234.
[15] 孙颖, 陈利, 李嘉禄. 碳/环氧三维多向编织复合材料圆管相贯接头承载有限元分析[J]. 固体火箭技术, 2008, 31(3): 266-269.
[16] Li D S, Fang D N, Jiang N, et al. Finite element modeling of mechanical properties of 3D five-directional rectangular braided compsoites[J]. Composites Part B: Engineering, 2011, 42(6): 1373-1385.
[17] Fang G D, Liang J, Wang Y, et al. The effect of yarn distortion on the mechanical properties of 3D four-directional braided composites[J]. Composites Part A: Applied Science and Manufacturing, 2009, 40(4): 343-350.
[18] 郑锡涛, 叶天麒, 郭稳学. 三维编织复合材料拉伸性能试验研究[J]. 机械科学与技术, 2004, 23(6): 681-683.
[19] 郭颖, 吴林志, 杨银环, 等. 三维六向编织复合材料拉伸性能的实验研究[J]. 宇航学报, 2012, 33(5): 669-674.
[20] 李嘉禄, 贺桂芳, 陈光伟. 温度对三维五向编织/环氧树脂复合材料拉伸性能的影响[J]. 复合材料学报, 2010, 27(6): 58-63.
[21] 薛再年, 曹海建, 钱坤, 等. 三维全五向编织复合材料的制备及其拉伸性能[J]. 东华大学学报( 自然科学版), 2012, 38(6): 646-649.
[22] Macander A B, Crane R M, Camponeschi E T. Fabrication and Mechanical properties of multi-dimension ally braided composite Materials[C]. Whitney J Med. Composite Materials: Testing and Design (7th Conf). Philadephia: American Society for Testing Material, 1986: 422-443.
[23] 王宝来, 王振清, 梁军, 等. 三维四向编织复合材料的拉伸尺寸效应研究[J]. 固体力学学报, 2011, 32(10): 53-59.
[24] 卢博远, 赵静, 韦子辉, 等. 碳纤维编织复合材料损伤变形与破坏实验研究[J]. 玻璃钢/复合材料, 2017(5): 22-27.
[25] Dian-sen Li, Zi-xing Lu.Microstructure and mechanical properties of three-dimensional ve directional braided composites[J]. Inter-national Journal of Solids and Structures, 2009, 46(3): 3422-3432.
[26] Yau S S, Chou T W, Ko F K. Flexural and axial compressive failures of three-dimensionally braided composite I-beams[J]. Composite, 1986, 17(3): 227-232.
[27] Surya R K, Abdel A. Longitudinal and transverse moduli and strengths of low Angle 3-D braided composite[J]. Journal of composite Materials, 1996, 30(8): 885-905.
[28] 焦亚男, 李嘉禄, 孙其永. 缝合连接三维编织复合材料弯曲破坏形式分析[J]. 固体火箭技术, 2010, 33(1): 104-110.
[29] 曹海建, 陈红霞, 黄晓梅. 三维管状编织复合材料的弯曲性能研究[J]. 产业用纺织品, 2016, 34(11): 10-13.
[30] 朱露露, 阎建华, 顾海麟. 二维三轴编织铺层复合材料开孔前后弯曲性能[J]. 东华大学学报自然科学版, 2015, 41(5): 589-595.
[31] Liao XL, Li HJ, Xu WF, et al. The effect of applied stress on damage mode of 3D C/C composites under bend-bend fatigue loading[J]. Science in China Series E-Technological sciences, 2007, 50(1): 97-102.
[32] Liao XL, Li HJ, Xu WF, et al. Effects of tensile fatigue loads on flexural behavior of 3D braided C/C composites[J]. Composites Science and Technology, 2008, 68(2): 333-336.
[33] Du S, Qiao S. Damage evolution of 3D C/SiC composite during tension-tension fatigue based on variation of electric resistance[J]. Acta Materiae Composite Sinica, 2011, 28(2): 165-169.
[34] Du S M, Qiao S R. Tension-tension Fatigue Behavior of 3D-C_f/SiC composite at 1500 ℃[J]. Journal of Materials Engineering, 2011(5): 34.
[35] Jedda H, Ben Abessalem S, Sakli F. The effect of cyclic loading on the mechanical properties of artificial ligaments[J]. Journal of the Textile Institute, 2011, 102(4): 332-342.
[36] 李嘉禄, 杨红娜, 寇长河. 三维编织复合材料的疲劳性能[J]. 复合材料学报, 2005, 22(4): 172-176.
[37] 刘瑞强, 赵强. 四步法三维编织复合材料弯曲疲劳行为实验研究[J]. 纤维复合材料, 2012(2): 20-22.
[38] 张中伟, 严静. 三维编织复合材料T型梁弯曲疲劳性能研究[J]. 玻璃钢/复合材料, 2014(4): 42-45.
[39] 朱元林, 温卫东, 刘礼华, 等. 碳/碳复合材料疲劳损伤失效试验研究[J]. 复合材料学报, 2016, 33(2): 386-393.