Application of Abaqus secondary development in buckling analysis of variable stiffness laminates

doi:10.19936/j.cnki.2096-8000.20220328.003

Abstract

Abstract: The buckling performance of variable stiffness laminates is one of the main criteria for analyzing its mechanical properties. This article is based on the Python language for the secondary development of Abaqus, and establishes a Python interactive interface. By establishing a finite element model of variable stiffness perforated/non-perforated laminates, the purpose of rapid modeling, automatic submission of analysis and collection of required data can be achieved. Finally, the call of the secondary development model, the reading of data and the output of the results are discussed through a calculation example, which verifies the feasibility of the secondary development. This study provides a reference for the subsequent development and application of Python's buckling simulation of variable stiffness laminates, and has certain guiding significance.

Key words: Abaqus secondary development, Python modeling, composite, variable stiffness laminates, buckling analysis

CLC Number:

TB332

DONG Ming-jun, CAO Zhong-liang, HAN Zhen-hua, FAN Guang-hong. Application of Abaqus secondary development in buckling analysis of variable stiffness laminates[J]. COMPOSITES SCIENCE AND ENGINEERING, 2022, 0(3): 24-28.

References

[1] 曹忠亮, 郭登科, 林国军, 等. 碳纤维复合材料自动铺放关键技术的现状与发展趋势[J]. 材料导报, 2021, 35(21): 21185-21194.
[2] DHINAKARAN V, SURENDAR K V, RIYAZ M S H, et al. Review on study of thermosetting and thermoplastic materials in the automated fiber placement process[J]. Materials Today: Proceedings, 2020, 27(2): 812-815.
[3] 王显峰, 张育耀, 赵聪, 等. 复合材料自动铺丝设备研究现状[J]. 航空制造技术, 2018, 61(14): 83-90.
[4] 年春波, 王小平, 代文猛, 等. 基于ABAQUS二次开发变角度层合板屈曲特性分析[J]. 宇航材料工艺, 2019, 49(4): 17-22.
[5] 卫宇璇, 张明, 刘佳, 等. 基于自动铺放技术的高精度变刚度复合材料层合板屈曲性能[J]. 复合材料学报, 2020, 37(11): 2807-2815.
[6] MORI Y, MATSUZAKI R, KUMEKAWA N. Variable thickness design for composite materials using curvilinear fiber paths[J]. Composite Structures, 2021, 263: 1-9.
[7] PEI J, WANG X, PEI J. et al. Path planning based on ply orientation information for automatic fiber placement on mesh surface[J]. Applied Composite Materials, 2018(25): 1477-1490.
[8] QU W, HE R, WANG Q. et al. Algorithms for constructing initial and offset path of automated fiber placement for complex double-curved surfaces[J]. Applied Composite Materials, 2021(28): 855-875.
[9] HE R, QU W, KE Y. An improved path discretization method for automated fiber placement[J]. Journal of Reinforced Plastics and Composites, 2020, 39(13-14): 545-559.
[10] 冉庆波, 肖鸿, 杨富鸿, 等. 含孔曲面自动铺丝轨迹规划算法研究[J/OL]. 航空学报: 1-15[2021-11-19]. http://kns.cnki.net/kcms/detail/11.1929.V.20210520.1000.002.html.
[11] 赵安安, 何大亮, 王晗, 等. 复杂曲面上的自动铺放路径规划方法[J/OL]. 北京航空航天大学学报: 1-10[2021-11-19]. DOI:10.13700/j.bh.1001-5965.2020.0619.
[12] GAO J X, QU W W, YANG D, et al. Two-stage sector partition path planning method for automated fiber placement on complex surfaces[J]. Computer-Aided Design, 2021, 132: 1-13.
[13] MINH H N, AVINKRISHNAN A V, PAUL D, et al. Effect of automated fiber placement (AFP) manufacturing signature on mechanical performance of composite structures[J]. Composite Structures, 2019, 228: 1-26.
[14] MARQUES F, MOTA A, LOJA M. Variable stiffness composites: optimal design studies[J]. Journal of Composites Science, 2020, 4(2): 80.
[15] 张鹏, 尹来容, 周振华, 等. 基于近似测地线的分层次自动铺带轨迹规划方法[J]. 机械工程学报, 2020, 56(23): 226-238.