PROGRESS IN PEREABILITY OF NATURAL FIBER FOR LIQUID COMPOSITES MOULDING

Abstract

Abstract: Natural fiber composites have been widely used in transportation and construction industry due to their high performance, low cost, and recyclability. Permeability of natural fiber fabric has a significant impact on the accuracy of LCM flow simulation, which will give useful guidance for parameter optimization, mold design and quality control. This review introduces measurement theory and equipment used for natural fiber. The effects of many factors on natural fiber permeability are discussed in details. Also, the difference of permeability between natural fiber and glass fiber is highlighted and the research directions of natural fiber permeability are pointed out.

Key words: LCM, natural fiber, permeability

CLC Number:

TB332

CAI Jing, ZHU Ying-dan, QIN Yong-li, FAN Xin-yu. PROGRESS IN PEREABILITY OF NATURAL FIBER FOR LIQUID COMPOSITES MOULDING[J]. COMPOSITES SCIENCE AND ENGINEERING, 2014, 0(4): 85-90.

References

[1] David B.Dittenber, Hota V.S.GangaRao. Critical review of recent publications on use of natural composites in infrastructure [J]. Composites Part A, 2012, 43: 1419-1429.
[2] Jochen Gassan, Andrzej K. Bledzki. The influence of fiber-surface treatment on the mechanical properties of jute-polypropylene composites [J]. Composites Part A, 1997, 28: 1001-1005.
[3] Lifang Liu, Jianyong Yu, Longdi Cheng, Xiaojie Yang. Biodegradability of polybutylenesuccinate (PBS) composite reinforced with jute fibre [J]. Polymer Degradation and Stability, 2009, 94: 90-94.
[4] B. Singh, M. Gupta, Anchal Verma.The durability of jute fiber reinforced phenolic composites[J]. Composite Science and Technology, 2000, 60: 581-589.
[5] M. Ramesh, K.Palanikumar, K.Hemachandra Reddy.Mechanical property evaluation of sisal-jute-glass fiber reinforced polyester composites [J]. Composites Part B, 2013, 48: 1-9.
[6] 张彦飞,刘亚青,杜瑞奎,代建学. 复合材料液体模塑成型技术( LCM) 的研究进展[J]. 塑料,2005,34(2):31-35.
[7] R.Umer, S.Bickerton, A. Fernyhough. Characterising wood fiber mats as reinforcements for liquid composite moulding processes [J]. Composites Part A, 2007, 38: 434-448.
[8] Li Ding, Chiang Shih, Zhiyong Liang, Chuck Zhang, Ben Wang. In situ measurement and monitoring of whole-field permeability profile of fiber preform for liquid composite molding processes [J]. Composites Part A, 2003, 34: 779-789.
[9] S.Bickerton, E.M.Sozer, P.J.Graham, S.G.Advani. Fabric structure and mold curvature effects on preform permeability and mold filling in the RTM process, PartⅠ: Experiment [J]. Composites Part A, 2000, 31: 423-438.
[10] 戴洪福,张博明,杜善义. 用均匀化方法预报平纹织物的渗透率[J]. 复合材料学报, 2009, 26(2): 90-93.
[11] G.Rieber, P.Mitschang. 2D permeability changes due to stitching seams [J]. Composites part A, 2010, 41: 2-7.
[12] 李嘉禄,吴晓青,冯池. RTM中纤维渗透率预测的研究进展[J]. 复合材料学报,2006,23(6):1-8.
[13] 戴洪福,卢守舟,杜善义. 树脂传递模塑工艺中的非饱和流动过程模拟与实验研究[J]. 复合材料学报,2010,27(2):84-89.
[14] 李敏,马晓星,王绍凯,张佐光. 测试条件对集束纤维单向渗透率的影响[J]. 复合材料学报,2009,26(6):71-77.
[15] M.Grujicic, K.M.Chittajallu, Shawn Walsh. Effect of shear, compaction and nesting on permeability of the orthogonal plain-weave fabric preforms [J]. Materials Chemistry and Physics, 2004, 86: 358-369.
[16] Sheard J, Senft V, Mantell SC, Vogel JH. Determination of corner and edge permeability in resin transfer molding [J]. Polymer Composites, 1998, 19(1): 96-105.
[17] Adams KL, Rebenfeld L. Permeability characteristics of multilayer fiber reinforcements, part Ⅰ: experiment observation [J]. Polymer Composites, 1991, 12(3): 179-186.
[18] Trevino L, Rupel K, Young WB, Liou MJ, Lee LJ. Analysis of resin injection molding in molds with preplaced fiber mats, Ⅰ: Permeabilityand compressibility measurements[J].Polymer Composites, 1991, 12(1): 20-29.
[19] S.Rassmann, R.Paskaramoorthy, R.G.Reid. Effect of resin system on the mechanical properties and water absorption of kenaf fibre reinforced laminates [J]. Materials and Design, 2011, 32(3): 1399-1406.
[20] Gastón Francucci, Exequiel S. Rodríguez, Analía Vázquez. Study of saturated and unsaturated permeability in natural fiber fabrics [J]. Composite Part A, 2010, 41: 16-21.
[21] 史德军,卢红,胡福增. RTM二维径向流动模型的理论概况及研究[J]. 玻璃钢/复合材料,2004,(3):38-41.
[22] Reza Masoodi, K.M.Pillai, Michael A.Verhagen. Flow modeling in natural-fiber preforms uesd in liquid composites molding [Z]. Newak, Delaware, USA: Reza Masoodi, 2009.
[23] 范晓琴,吴晓青. RTM工艺中纤维渗透率的研究进展[J]. 玻璃钢/复合材料,2006,(3):44-49.
[24] 田正刚,夏雨,张垣. LCM工艺中注射压力纤维预成型体渗透率的影响[J]. 玻璃钢/复合材料,2005,(2):32-33.
[25] Yiwen Luo, Ignaas Verpoest, Kris Hoes, Marleen Vanheule, Hugo Sol, Albert Cardon. Permeability measurement of textile reinforcements with several test fluids [J]. Composite Part A, 2001, 32: 1497-1504.
[26] Yen-Huang Lai, Bamin khomami, Johnl Kardos. Accurate permeability characterization of preforms used in polymer matrix composite fabrication processes [J]. Polymer Composites, 1997, 18(3): 368-377.
[27] K.Ken Han, C.William Lee, Brian P.Rice. Measurements of the permeability of fiber preform and application [J]. Composite Science and Technology, 2000, 60: 2435-2441.
[28] J.R.Weitzenback, R.A. Shenoi, P.A. Wilson. Measurement of three-dimensional permeability [J]. Composites part A, 1998, 29: 159-169.
[29] Li Y, Mai Y W, Y.L. Sisal fiber and its composites: A review of recent developments [J]. Composite Science and Technology, 2000, 60: 2037-2055.
[30] 刘晓晔,戴干策. 热塑性树脂浸渍黄麻纤维毡的研究[J]. 高校化学工程学报, 2007, 4(21):586-591.
[31] 张永励,李岩,孙震. 织物形式对苎麻纤维渗透率及其复合材料力学性能的影响[J]. 复合材料学报,2012,12(4):47-52.
[32] 薛道顺,周洪涛,胡红. 非织造工艺对天然纤维增强体树脂流动性能的影响[J]. 玻璃钢/复合材料,2011,(1):29-32.
[33] E.Rodríguez, F.Giacomelli, A.Vázqueez. Permeability-porosity relationship in RTM for different fiberglass and natural reinforcement [J]. Journal of Composite Materials, 2010, 38(3): 259-268.
[34] 田正刚. LCM工艺中纤维预成型体渗透率的研究[D]. 2004.