Transverse compressive mechanical tests of CFRP tendons at elevated temperature

doi:10.19936/j.cnki.2096-8000.20260228.007

Abstract

Abstract: To improve the high temperature resistance of joints in cable roof structures made of carbon fiber reinforced polymer (CFRP), the CFRP tendon wedge-type anchorage system was studied. Firstly, the glass transition temperature test of CFRP tendons was carried out to obtain the starting and ending temperatures of the glass transition of CFRP tendons (126 ℃, 192 ℃). Based on this, the target test temperature for the transverse compressive mechanical test at elevated temperature was further worked out. Then, the same two aluminum plates with semicircular grooving were made of A6061-T6 aluminum alloy to simulate the wedge in the anchoring system. By conducting experiments, the transverse compressive mechanical properties and deformation characteristics of CFRP tendons with the influence of aluminum plate are obtained under high temperature. The results can provide data support for the construction of the constitutive model of CFRP tendons under high temperature. By establishing the finite element model corresponding to the test, the average error between the calculated strain value and the strain value obtained by the test is less than 5%, the validity of thermal and mechanical parameters in the finite element model is demonstrated, and the anchorage system model can be further constructed for high-temperature analysis.

Key words: CFRP tendon, transverse compression, high-temperature mechanical properties, anchorage system, finite element model, reduction factor

CLC Number:

TB332

WANG Lichen, LIU Yuanyuan. Transverse compressive mechanical tests of CFRP tendons at elevated temperature[J]. COMPOSITES SCIENCE AND ENGINEERING, 2026, 0(2): 49-57.

References

[1] 冯鹏. 复合材料在土木工程中的发展和应用[J]. 玻璃钢/复合材料, 2014(9): 99-104.
[2] ZHOU F, PANG R, ZHANG P, et al. Experimental investigation of the mechanical properties of carbon fibre reinforced polymer (CFRP) tendons during and after elevated temperatures[J]. Materials and Structures, 2022, 55(2): 82.
[3] LE Q X, TORERO J L, DAO V T. Understanding the effects of stress on the coefficient of thermal expansion[J]. International Journal of Engineering Science, 2019, 141: 83-94.
[4] HAN Q H, WANG L C, XU J. Experimental research on mechanical properties of transverse enhanced and high-temperature-resistant CFRP tendons for prestressed structure[J]. Construction and Building Materials, 2015, 98: 864-874.
[5] XU J, WANG W X, HAN Q H. Mechanical properties of pultruded high-temperature-resistant carbon-fiber-reinforced polymer tendons atelevated temperatures[J]. Construction and Building Materials, 2020, 258: 119526.
[6] 苏捷, 李权浩, 方志, 等. 高温下CFRP筋及其粘结型锚固系统的力学性能[J]. 复合材料学报, 2022, 39(11): 5300-5310.
[7] 方志, 方川, 蒋正文, 等. 高温后CFRP筋及其粘结式锚固系统的力学性能[J]. 复合材料学报, 2021, 38(11): 4031-4041.
[8] HAN Q H, WANG L C, XU J. Test and numerical simulation of large angle wedge type of anchorage using transverse enhanced CFRP tendons for beam string structure[J]. Construction and Building Materials, 2017, 144: 225-237.
[9] 王安妮, 刘晓刚, 岳清瑞. 碳纤维复合材料拉索的锚固体系及服役性能研究进展[J]. 建筑结构学报, 2022, 43(9): 45-54.
[10] 王力晨. 一种CFRP索整体式大角度夹片型锚固系统: CN111287465A[P]. 2020-06-16.
[11] 全国纤维增强塑料标准化技术委员会. 聚合物基复合材料玻璃化转变温度试验方法动态力学分析法(DMA): GB/T 40396—2021[S]. 北京: 中国标准出版社, 2021.
[12] 王元清, 林错错, 石永久. 露天日照条件下钢结构构件温度的试验研究[J]. 建筑结构学报, 2010, 31(增刊1): 140-147.
[13] 范重, 王喆, 唐杰. 国家体育场大跨度钢结构温度场分析与合拢温度研究[J]. 建筑结构学报, 2007(2): 32-40.
[14] 阿禾. 地球十大“极点”[J]. 建筑工人, 2010, 31(1): 54.
[15] WANG K, YOUNG B, SMITH S T. Mechanical properties of pultruded carbon fibre-reinforced polymer (CFRP) plates at elevated temperatures[J]. Engineering Structures, 2011, 33(7): 2154-2161.
[16] YU B L, KODUR V. Effect of temperature on strength and stiffness properties of near-surface mounted FRP reinforcement[J]. Composites Part B: Engineering, 2014, 58: 510-517.
[17] CAO S H, WU Z S, WANG X. Tensile properties of CFRP and hybrid FRP composites at elevated temperatures[J]. Journal of Composite Materials, 2009, 43(4): 315-330.
[18] American Society for Testing Materials. Standard test method for compressive properties of polymer matrix composite materials with unsupported gage section by shear loading: ASTM D3410/D3410M-16[S]. West Conshohocken: ASTM International, 2003.
[19] 中华人民共和国住房和城乡建设部. 纤维增强复合材料工程应用技术标准: GB 50608—2020[S]. 北京: 中国计划出版社, 2020.
[20] 中华人民共和国住房和城乡建设部. 民用建筑热工设计规范: GB 50176—2016[S]. 北京: 中国建筑工业出版社, 2016.
[21] GRIFFIS C A, MASUMURA R, CHANG C. Thermal response of graphite epoxy composite subjected to rapid heating[J]. Journal of Composite Materials, 1981, 15: 427-442.
[22] HAN Q H, ZHENG X W, WANG L C. Experimental and numerical investgation of the mechanical properties of a CFRP tendon-wedge assembly loaded under transverse compressive loading[J]. Materials, 2023, 16(9): 3305.
[23] 中华人民共和国住房和城乡建设部. 建筑钢结构防火技术规范: GB 51249—2017[S]. 北京: 中国计划出版社, 2017.
[24] 彭航, 蒋首超, 赵媛媛. 建筑用6061-T6系铝合金高温下力学性能试验研究[J]. 土木工程学报, 2009, 42(7): 46-49.