Study on the effect of SiC/SiO2 complex coating on the antioxidant performance of carbon fiber and its composite materials

doi:10.19936/j.cnki.2096-8000.20250328.017

Abstract

Abstract: A SiC/SiO₂ complex coating is prepared on the surface of carbon fiber by sol-gel method and precursor infiltration pyrolysis method, and carbon fiber reinforced phenolic resin matrix composites are prepared by using autoclave process, the flexural strength of the composites is tested after oxidation at 600 ℃, 800 ℃ and 1 000 ℃, studied the effect of coating on the oxidation resistance of carbon fiber and its composite materials. The results show that the flexural strength of complex coating carbon fiber/phenolic resin composites after oxidation at 1 000 ℃ in air is 60 MPa, which is 3.3 times of the flexural strength of original carbon fiber/phenolic resin composites under the same conditions, and the good antioxidant effect of SiC/SiO₂ coating on carbon fibers gives composite materials a certain flexural strength. And under the synergistic protection of SiC/SiO₂ coating, the complex coating carbon fiber/phenolic resin composite material exhibits better ablation resistance under oxygen acetylene flame.

Key words: SiC/SiO₂ complex coating, carbon fiber, resin matrix composite, oxidation resistance, flexural property, ablation resistance

CLC Number:

TB332

YAN Haibo, TAO Jiadong, ZHOU Zihan, HUANG Zhixiong, SHI Minxian, DING Jie. Study on the effect of SiC/SiO₂ complex coating on the antioxidant performance of carbon fiber and its composite materials[J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(3): 130-138.

References

[1] 刘文静, 杨国荣, 赵晓曼. 碳纤维复合材料研究进展及其应用[J]. 纺织科技进展, 2023(7): 1-4, 52.
[2] 杨广林, 张启青, 史宾, 等. 碳纤维复合材料在汽车上的应用及成型工艺进展[J]. 塑料工业, 2023, 51(11): 27-33.
[3] 杨强, 刘洪新, 何端鹏, 等. 高导热沥青基碳纤维复合材料在航天器中的应用现状及展望[J]. 材料导报, 2024, 38(1): 216-223.
[4] 徐翊桄, 靳玉伟, 张海龙, 等. 碳纤维热氧化行为及其机理[J]. 合成纤维工业, 2010, 33(6): 5-7.
[5] 余海鹏, 王勇, 胡永琪. 碳纤维表面涂层提高抗氧化性能的研究进展[J]. 化工新型材料, 2014, 42(1): 21-23.
[6] 赵鹏. 碳纤维表面抗氧化复合涂层的制备及性能研究[D]. 北京: 中国科学院大学, 2021.
[7] DENG Z Y,YANG X Y,YU X B, et al. High temperature flexural strength, microstructure, phase evolution and anti-oxidation mechanism of Al-coated carbon fiber/boron phenolic resin ceramizable composite modified with TiB₂ and B₄C[J]. Ceramics International, 2023, 49(15): 25003-25015.
[8] 黄鹏. 有机硅树脂涂层碳纤织物在高温下热力化学耦合分析[D]. 天津: 天津工业大学, 2022.
[9] 何新波, 张长瑞, 周新贵, 等. 裂解碳涂层对碳纤维增强碳化硅复合材料力学性能的影响[J]. 高技术通讯, 2000(9): 92-94.
[10] MUHAMMET N A, CENNET Y, NURI S. Improving the oxidation resistance of carbon fibers via B₄C coating by modified boron oxide chemical vapor deposition[J]. Solid State Sciences, 2023, 146: 107367-107378.
[11] SU B E, WOO-SEONG T, YOUNG K J, et al. Oxidation resistance improvement of carbon fiber nonwoven fabrics through SiC coating technology[J]. Ceramics International, 2023, 49(18): 30677-30684.
[12] XIA K D, LU C X, YANG Y. Preparation of an anti-oxidative SiC/SiO₂ coating on carbon fibers by a sol-gel method[J]. New Carbon Materials, 2013, 28(3): 208-214.
[13] 夏克东, 吕春祥, 杨禹. SiOC陶瓷涂层改善炭纤维的抗氧化性能[J]. 新型炭材料, 2015(3): 236-243.
[14] 董志军, 李轩科, 袁观明, 等. 碳纤维表面陶瓷涂层的制备与应用研究[J]. 材料导报, 2008, 22(5): 115-118.
[15] HAO J, LI J, SHI W, et al. Antioxidant coating composed of SiC on carbon fibers by chemical vapor reaction[J]. Journal of Ceramic Science and Technology, 2018, 9(4): 465-470.
[16] 王鹏. C/C-SiC复合材料的PIP工艺改进及性能[D]. 沈阳: 东北大学, 2015.
[17] 刘雨薇, 农智升. 溶胶-凝胶法制备陶瓷涂层的研究现状[J]. 材料保护, 2023, 56(5): 173-179.
[18] 中国建筑材料联合会. 纤维增强塑料弯曲性能试验方法: GB/T 1449—2005[S]. 北京: 中国标准出版社, 2005.
[19] 国防科学技术工业委员会. 烧蚀材料烧蚀试验方法:GJB 323A—1996[S]. 北京: 中国标准出版社, 1996.
[20] 陈文怡, 丁治珣. 聚碳硅烷的热裂解动力学行为研究[J]. 硅酸盐学报, 2012, 40(9): 1278-1283.
[21] 段晓峰, 翟萍. 热处理工艺对硅油改性石英纤维/石英复合材料性能的影响[J]. 现代技术陶瓷, 2021, 42(3): 209-212.
[22] 黄思德, 刘君武, 李青鑫, 等. 硅溶胶粘结SiC预制件的烧结特性研究[J]. 粉末冶金工业, 2012, 22(1): 32-36.
[23] 王昊, 王归, 周星明, 等. 高导热中间相沥青基碳纤维的氧化行为[J]. 复合材料学报, 2023, 40(9): 5189-5200.
[24] 刘钟铃, 李国明, 童元建, 等. 国产碳纤维微晶结构与缺陷结构研究[J]. 玻璃钢/复合材料, 2014(11): 58-62.
[25] DEMIR M, KAHVECI Z, AKSOY B, et al. Graphitic biocarbon from metal-catalyzed hydrothermal carbonization of lignin[J]. Industrial & Engineering Chemistry Research, 2015, 54(43): 10731-10739.
[26] 杨妙妙, 沙宝林, 马晓燕, 等. 液态聚碳硅烷的结构及固化行为对其陶瓷化的影响[J]. 高分子材料科学与工程, 2023, 39(5): 107-117.
[27] ZENG K H, MA Q S, GU X Y. Effects of SiC interfacial coating on mechanical properties of carbon fiber needled felt reinforced sol-derived Al₂O₃ composites[J]. Transactions of Nonferrous Metals Society of China, 2020, 30(2): 463-471.
[28] 周坤宇, 高丽红, 马壮, 等. 无机填料改性硼酚醛树脂复合涂层的抗激光烧蚀性能研究[J]. 兵器材料科学与工程, 2023, 46(3): 1-6.
[29] 罗骁, 陈晔松, 康盼, 等. TaC对SiC涂层高温耐烧蚀性能的影响[J]. 粉末冶金材料科学与工程, 2023, 28(2): 120-128.
[30] 张一, 李文生, 安国升. 纳米和微米ZrB₂-SiC粉末对涂层抗烧蚀性能的影响 [J]. 兰州交通大学学报, 2023, 42(4): 113-119.

Study on the effect of SiC/SiO₂ complex coating on the antioxidant performance of carbon fiber and its composite materials

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	ZHANG Jingli, KANG Yunjian. Experimental research on dynamic mechanical properties of concrete confined by carbon fiber sheet under high temperature [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(3): 22-29.
[2]	LIU Wei, YANG Ji, YUAN Chunhui, XIA Xu, ZHANG Jinguang. Study on interface bonding properties of CFRP-steel bonding at different temperatures [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(3): 39-45.
[3]	QIU Xinghan, SONG Tong, ZHANG Sai, WANG Fusheng, MENG Xianming, CHEN Yajun. Parameters calibration and validation of carbon fiber reinforced composite based on *MAT_58 model [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(3): 54-62.
[4]	FENG Jing, ZHANG Pengxiang, JIANG Yue, ZHU Liping, LI Shuang, XI Jianfei. Numerical simulation study on the pultrusion curing process of carbon fiber/epoxy resin composite materials [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(3): 63-70.
[5]	DONG Chuanhe, SUN Xiaoyu, LI Wangxin, JIA Ruihao, ZHAO Xin. Cooling model and deformation study of 3D printing continuous carbon fiber composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(3): 79-86.
[6]	ZHANG Yueyi, TANG Xiaohui, GAO Shangbing, LI Gang, YANG Xiaoping. Research on interfacial compatibility and performance matching between cyanate ester resin and high-strength/high-modulus carbon fiber [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(2): 91-98.
[7]	YANG Cheng, JIANG Pengfei, ZHU Liping, DONG Jiping, WANG Jingyuan. Study on temperature-dependent thermal expansion properties of carbon fiber and CFPR [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(1): 35-41.
[8]	HUANG Yanqing, WANG Xingyin, XU Liang, WANG Xin, ZHOU Song. Effect of different corrosion environments on compressive properties of carbon fiber composites with impact damage [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(1): 97-103.
[9]	ZHOU Yongjun, ZHOU Kun, LI Hongzhou. Layup design of T-type battery box with carbon fiber reinforced composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(1): 117-123.
[10]	GONG Haojie, TIAN Zhenggang, LIU libo, ZHANG Tao, LI Liying. Closed-loop chemical recycling and reuse of thermosetting resin-based carbon fiber composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(1): 141-148.
[11]	LÜ Xujin, HUO Hongyu, PENG Gongqiu, ZHANG Baoyan, YE Jinqiu, LIU Yong. Electrospun PPESK fiber mats interlayer toughened carbon fiber/epoxy resin composite [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 19-27.
[12]	HUANG Daming, TANG Lixin, SUN Juntao, WANG Wei. Research on the effect of residual monomer acrylonitrile on the preparation of PAN-based carbon fiber [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 48-51.
[13]	WU Haisheng, LUO Jintao, GU Yizhuo, SUN Tianfeng, LIU Jia, YAO Qi, LI Yu. Study on structural stability of high-modulus carbon fiber composite tube in alternating high and low temperature environment [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 87-91.
[14]	LIU Yushun, WEI Xiaolin, LIU Benben, GU Yizhuo. Research on gamma ray shielding performance of tungsten powder modified 3D spacer fabric composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 24-31.
[15]	MAO Jingqiao, HU Yiling, PANG You, YANG Yuqiu. Preparation and performance study of sizing treated carbon fiber/polypropylene composite molded by CF/PP fiber mat [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 32-38.