THE DISCUSSION OF DESIGNING FIBER REINFORCE PLASTIC TRANSMISSION TOWER

Abstract

CLC Number:

TB332

LIU Huan-huan, LIU Ming-hui, YU Xin. THE DISCUSSION OF DESIGNING FIBER REINFORCE PLASTIC TRANSMISSION TOWER[J]. COMPOSITES SCIENCE AND ENGINEERING, 2013, 0(6): 48-52.

[1] 廖英强,苏建河. ANSYS 在复合材料仿真分析中的应用[J]. 玻璃纤维,2006,(4).
[2] Dimos J. Polyzois,Ioannis G.Raftoyiannis. Nonlinear shell-type to beam-type fea simplifications for composite frp poles[J]. Arch Appl Mech,2009,79: 347-358.
[3] 周鹏展,肖加余,曾竞成,王进,杨军. 基于ANSYS 的大型复合材料风力机叶片结构分析[J]. 国防科技大学学报,2010,32(2).
[4] 赵娜,李军向,李成良. 基于ANSYS 建模的风力机叶片模态分析及稳定性分析[J]. 玻璃钢复合材料,2010,(6).
[5] 贾红雨,张璐璐. 基于三种不同轮毂材料的储能飞轮转子有限元分析[J]. 玻璃钢复合材料,2012,(7).
[6] 段成红,吴祥,罗翔鹏. 碳纤维缠绕复合气瓶爆破压力的有限元分析[J]. 玻璃钢复合材料,2012,(2).
[7] S. Ibrahim,D. Polyzois.Ovalization analysis of fiber-reinforced plastic poles[J]. Composite Structures,1999,(45): 7-12.
[8] Amir Fam,Yail J.Kim,Je-Kuk Son. A numerical investigation into the response of free end tubular composite poles subjected to axial and lateral loads[J]. Thin Walle d Struct,2010,04: 002.
[9] Shin-etsu Fujimoto,Hideki Sekine. Identification of crack and disband fronts in repaired aircraft structural panels with bonded FRP composite patches.
[10] 李顺林,王兴业. 复合材料结构设计基础[M]. 湖北: 武汉工业大学出版社,1993. l-6.
[11] 赵美英,陶梅贞. 复合材料结构力学与结构设计[M]. 西安: 西北工业大学出版社,2007.
[12] 陆洲. 220kV 钢管杆设计的最优参数及设计要点[J]. 红水河,2007,(2).
[13] 沈才元,章志鸿. 110kV 钢管杆设计的几点思考[J]. 华东电力,2003,(12).
[14] Amir Fam,Je-Kuk Son.Finite element modeling of hollow and concrete-filled fiber composite tubes in fiexure: Optimization of partial filling and a design method for poles[J]. Engineering Structures,2008,(30): 2667-2676.
[15] GB-50545-2010,110kV ~ 750kV 架空输电线路设计规范[S].
[16] DL/T899-2004,架空线路杆塔结构荷载试验[S].

THE DISCUSSION OF DESIGNING FIBER REINFORCE PLASTIC TRANSMISSION TOWER

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	ZHANG Qian, ZHANG Yifan, ZOU Qi, ZHANG Peng, JIAO Yanan, AN Liuxu, LIU Yanfeng, ZHANG Daijun, HAO Junjie, CHEN Li. Connection performance and failure mechanisms of three-dimensional woven composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 5-11.
[2]	YAN Jiqiang, XIE Zongyou, LI Jun, ZOU Qi, LEI Shuai, CAO Tienan, ZHANG Daijun. Effect of ply angle on anti-high speed impact properties of polyimide fiber reinforced composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 12-18.
[3]	LÜ Xujin, HUO Hongyu, PENG Gongqiu, ZHANG Baoyan, YE Jinqiu, LIU Yong. Electrospun PPESK fiber mats interlayer toughened carbon fiber/epoxy resin composite [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 19-27.
[4]	GUO Miaocai. The interlayer structures and lightning strike damage behaviors of the conductive particles modified highly tough composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 28-36.
[5]	LI Moying, ZHENG Linfeng, LIU Gang, LI Mengjiao, YAO Jianan. Adhesion study of carbon fiber/polyaryletherketone thermoplastic composites with epoxy coatings [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 37-42.
[6]	XIE Wenbo. Study on properties of high heat resistant and flame retardant epoxy resin matrix CFRP [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 43-47.
[7]	HUANG Daming, TANG Lixin, SUN Juntao, WANG Wei. Research on the effect of residual monomer acrylonitrile on the preparation of PAN-based carbon fiber [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 48-51.
[8]	FENG Zhenhui, WANG Zhe, ZENG Jie, CHEN Binbin, FENG Chunle, ZHOU Fan. A method for optical fiber impact localization and load history reconstruction of composite laminates [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 52-56.
[9]	ZHANG Dewei, WEI Wei, ZHANG Pin, WANG Qi, ZHAO Cong, AN Luling. Shape control of aircraft composite components based on measured data [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 57-66.
[10]	YAN Chao, RONG Xiaoyuan, ZHAO Yueqing, QIAN Zhongjian. Curing deformation study of composite cobonding omega stringer stiffened panel [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 67-72.
[11]	YAN Lei, ZHAO Fei, HUAN Dajun, ZHANG Shengyuan, WANG Bin, XIAO Jun. Research on tension-tensile fatigue behavior and life prediction of T700/PPS filament winding thermoplastic composites with NOL rings [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 73-81.
[12]	CHENG Libing, XU Weiwei, LI Bo, WEN Shiqi. Research on microwave curing process for rib composite parts [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 82-86.
[13]	WU Haisheng, LUO Jintao, GU Yizhuo, SUN Tianfeng, LIU Jia, YAO Qi, LI Yu. Study on structural stability of high-modulus carbon fiber composite tube in alternating high and low temperature environment [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 87-91.
[14]	FU Chengjian, LIN Song, GUO Shufen. Prediction and analysis of burst pressure of type Ⅳ composite cylinder based on progressive damage [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 92-97.
[15]	XU Lin, LIU Chuanjun, ZHAO Chongshu. Application and development trends of composite materials in civil aircraft [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 98-104.