RESEARCH IN CURING KINETICS OF THE COMPLEX INITIATION SYSTEM USING IN SYNTHETIC QUARTZ OF UNSATURATED POLYESTER RESIN

Abstract

Abstract: The mechanical properties of synthetic quartz of unsaturated polyester resin are compared for different recipes of the complex initiation system. The initiation system consists of benzoyl peroxide (BPO) and tert-butyl peroxy-2-ethylhexanoate (OT). The non-isothermal curing kinetics of the unsaturated polyester resin with complex initiation system was studied using differential scanning calorimetry (DSC). Kissinger and Crane equations are used to obtain the curing kinetics model of unsaturated polyester based on the experimental data obtained. Then, the model developed was verified and modified and better agreement with experiments was achieved.

Key words: differential scanning calorimetry, complex initiation, curing kinetics, synthetic quartz

CLC Number:

TB332

WU Xia, WANG Ji-hui, NI Ai-qing. RESEARCH IN CURING KINETICS OF THE COMPLEX INITIATION SYSTEM USING IN SYNTHETIC QUARTZ OF UNSATURATED POLYESTER RESIN[J]. COMPOSITES SCIENCE AND ENGINEERING, 2015, 0(10): 5-9.

References

[1] Bera P, Guptha N, Dasan K P,et al. Recent developments in synthetic marble processing. Rev. Adv. Mater, Sci,2012,32: 94-105.
[2] Martínez-Barrera G,Brostow W. Effect of marble particle size and gamma irradiation on mechanical properties of polymer concrete. e-Polymers, 2010, 10(1): 663-676.
[3] 黄杏芳, 吴华忠. 不饱和树脂人造石英石性能的研究. 闽江学院学报, 2012, 33(05): 120-123.
[4] 彭瑛, 刘建华, 等.不饱和聚酯型人造大理石的力学性能. 热固性树脂, 2009, 24(02): 39-41.
[5] 张丹, 余海军, 李三喜. 聚酯型人造大理石的制备. 辽宁化工,2007,3(02):86-87.
[6] Vyazovkin S, Burnham A K, Criado J M, et al. ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis data. Thermochimica Acta, 2011, 520(1): 1-19.
[7] Zhang J, Dong H, Tong L, et al. Investigation of curing kinetics of sodium carboxymethyl cellulose/epoxy resin system by differential scanning calorimetry. Thermochimica Acta, 2012, 549:63-68.
[8] 郭清兵, 陈江华, 谭赟华, 等. 环氧树脂固化动力学的非等温DSC研究. 广东化工, 2010, 04: 68-69+79.
[9] 丁江平, 廖栋, 范欣愉. 非等温DSC法研究复合材料用环氧树脂的固化反应. 材料导报, 2011, 14: 139-143.
[10] Worzakowska M. Synthesis, characterization, thermal, and viscoelastic properties of an unsaturated epoxy polyester cured with different hardeners. Journal of applied polymer science, 2008, 110(6):3582-3589.
[11] Ramis X, Salla J M. Effect of the initiator content and temperature on the curing of an unsaturated polyester resin. Journal of Polymer Science Part B Polymer Physics,1999, 37(8): 751-768.
[12] de la Caba K, Guerrero P, Mondragon I, et al. Comparative study by DSC and FTIR techniques of an unsaturated polyester resin cured at different temperatures. Polymer international, 1998, 45(4): 333-338.
[13] Zvetkov V L. Comparative DSC kinetics ofthe reaction of DGEBA with aromatic diamines.I. Non-isothermal kinetic study of the reac-tion of DGEBA with m-phenylene diamine. Polymer, 2001, 42(16): 6687-6697.
[14] 周杰, 曹国荣, 王巍, 等. DSC法研究不饱和聚酯树脂的固化反应动力学及其固化过程. 玻璃纤维, 2011, 05: 16-20+24.
[15] 刘春林, 张兰芬, 陶国良, 等. 不饱和聚酯树脂/复合引发体系固化反应动力学研究. 中国塑料, 2009, 05: 61-65.