CURRENT RESEARCH AND DEVELOPMENT OF THE APPLICATION OF THE PRE-TIGHTENED TOOTH CONNECTION

Abstract

Abstract: The composite pre-tightened tooth connection is a technique with high efficiency and applied to large bearing components.It has showed a good prospect of applications.This paper summarys research progresses of the composite pre-tightened tooth connection in failure modes, load transfer mechanism and design calculation methods and so on ,and introduces two typical applications of the technique. Finally, the application prospect of the technique is reviewed, and the basic research work which needs to be improved is put forward.

Key words: pre-tightened tooth connection, composite, progress

CLC Number:

TB332

ZHAO Qi-lin, GAO Yi-feng, LI Fei. CURRENT RESEARCH AND DEVELOPMENT OF THE APPLICATION OF THE PRE-TIGHTENED TOOTH CONNECTION[J]. COMPOSITES SCIENCE AND ENGINEERING, 2014, 0(12): 52-56.

References

[1] Starikov R, Schon J. Quasi-static behavior of composite joints with protruding head bolts[J]. Compos Struct, 2001,51:411-425.
[2] Roman Starikov, Joakim Schn. Experimental Investigation of Fatigue Behaviour in Composite Bolted Joints[J].
[3] Choi, J.H., Lee, D.G.. An Experimental Study of the Static Torque Capacity of the Adhesively-bonded Tubular Single Lap Joint[J]. Journal of Adhesion, 1996, 55: 245-260.
[4] Deng A Z, Zhao Q L, Li F, et al. Research on bearing capacity of single tooth to composite pre-tightened teeth connection[J]. Journal of Reinforced Plastics and Composites, 2013, 32(21):1603-1613.
[5] Fei Li, Qi Lin Zhao. Prediction of tensile capacity based on cohesive zone model of bond anchorage for fiber-reinforce polymer tendon[J]. Composite Structures, 2010, (92):2400-2405.
[6] 李飞. 复合材料新型连接技术及在桁架中的应用研究[D]. 南京: 解放军理工大学博士学位论文, 2012.
[7] 马毓,赵启林. 复合材料胶-螺混合连接接头承载力分析[J]. 复合材料学报, 2011, 28(4): 225-231.
[8] Qi Lin Zhao,Fei Li. Research on Bearing Capacity of Single Tooth to Composite Pre-Tightened Teeth Connection[J].Journal of Reinforced Plastics and Composites.
[9] 赵启林,李飞.复合材料预紧力螺纹连接技术[P]. 201020157303.1.
[10] 高一峰. 复合材料预紧力齿连接强度预测及接头设计[D].南京:解放军理工大学硕士学位论文, 2014.
[11] 徐龙星. 复合材料预紧力齿连接承载力计算方法与试验研究[D].南京:解放军理工大学硕士学位论文, 2014.
[12] 苗大胜. 纤维增强树脂基复合材料组合空间桁架桥连接技术和结构性能研究[D]. 南京: 解放军理工大学硕士学位论文, 2013.
[13] 赵启林,刘鹏飞,徐龙星. 玻璃纤维复合材料-钢组合桁架结构长期力学性能研究[J]. 工业建筑, 2013(增刊).
[14] 赵启林,李飞,徐康. 新型复合材料桁架结构静载实验研究[J]. 工业建筑, 2011(增刊).
[15] 赵启林,李飞. 一种主承力复合材料桁架桥制备方法[P]. 201110355168.0.
[16] Pengfei Liu,Qilin Zhao,Fei Li, Jinchun Liu, Haosen Chen.Research on the mechanical properties of a glass fiber reinforced polymer-steel combined truss structure[J]. The Scientific World Journal, 2014.
[17] Zhang D. Z Q .H Y. Flexural properties of a lightweight hybrid FRP-aluminum modular space truss bridge system[J]. Composite Structures, 2014, 108(0): 600-615.
[18] D.-D. Zhang, Y.-X. Huang, Q.-L. Zhao, F. Li, F. Li, Y.-F. Gao. Structural performance of a hybrid FRP-aluminum modular triangular truss system subjected to various loading conditions[J]. The Scientific World Journal, 2014.