RESEARCH PROGRESS ON INTERFACIAL PROPERTIES OF CARBON FIBER REINFORCED POLYPHENYLENE SULFIDE COMPOSITES

doi:10.19936/j.cnki.2096-8000.20210328.019

Abstract

Abstract: Carbon fiber reinforced polyphenylene sulfide resin composites are widely used in electronic information, aerospace and other fields due to their good mechanical properties, flame retardant and chemical corrosion resistance. The interface between carbon fiber and polyphenylene sulfide is a key factor determining the composite performance. For further improving the properties of composites to adapt to different construction and service environments, more and more attentions have been paid to the interface properties between carbon fiber and polyphenylene sulfide. In this paper, the factors affecting the interfacial properties of carbon fiber reinforced polyphenylene sulfide composites are summarized from the views of process conditions, carbon fiber sizing and resin modification.

Key words: carbon fiber, polyphenylene sulfide, surface treatment, interface properties, composites

CLC Number:

TB332

WU Bo, YANG Chang-ling, ZHANG lin-ping, LU Yong-gen. RESEARCH PROGRESS ON INTERFACIAL PROPERTIES OF CARBON FIBER REINFORCED POLYPHENYLENE SULFIDE COMPOSITES[J]. COMPOSITES SCIENCE AND ENGINEERING, 2021, 0(3): 117-121.

References

[1] 申霄晓. 聚苯硫醚纤维的性能综述[J]. 中国纤检, 2018(4): 140-141.
[2] 周雪霖. 聚苯硫醚(PPS)结晶度影响因素及其力学性能的研究[D]. 北京: 中国民航大学, 2019.
[3] 王玉琦. 碳纤维织物/聚苯硫醚复合材料工艺研究[J]. 航空学报, 1993, 14(4): 214-218.
[4] 张随山, 包筱梅, 许砚琦, 等. 碳纤维/聚苯硫醚复合材料复合工艺及力学性能的研究[J]. 航空学报, 1993, 14(6): 326-329.
[5] 阮春寅, 丁江平, 张翼鹏, 等. 碳纤维织物增强聚苯硫醚复合材料的制备及性能[J]. 材料导报, 2012, 26(14): 77-81.
[6] 曾汉民, 何国仁. 聚苯硫醚及其碳纤维复合材料的破坏形态[J]. 宇航学报, 1983(2): 14-21.
[7] 曾汉民, 何国仁. 聚苯硫醚的结晶形态及碳纤维的界面效应研究[J]. 中国科学(B辑化学生物学农学医学地学), 1983(4): 289-294.
[8] BATISTA N L, OLIVIER P, BERNHART G, et al. Correlation between degree of crystallinity, morphology and mechanical properties of PPS/carbon fiber laminates[J]. Materials Research, 2016, 19(1): 195-201.
[9] 景鹏展. 碳纤维织物增强热塑性复合材料的制备与研究[D]. 上海: 东华大学, 2015.
[10] 曹硕, 黄鑫林, 朱姝, 等. 碳纤维增强聚苯硫醚(CF/PPS)航空复合材料的结晶行为及力学性能[J]. 材料科学与工程学报, 2019, 37(4): 571-577.
[11] LIU B, WANG X, LONG S, et al. Interfacial micromechanics of carbon fiber-reinforced polyphenylene sulfide composites[J]. Composite Interfaces, 2014, 21(4): 359-369.
[12] ZHAO L, HUANG Z, XIONG S, et al. Polyphenylene sulfide composite laminate from flexible nonwovens and carbon fiber fabrics prepared by thermal lamination and thermal treatment[J]. Polymer Bulletin, 2019, 76(11): 5633-5648.
[13] 郭兵兵, 王连玉, 周春华, 等. 连续碳纤维增强聚苯硫醚(PPS)复合管材的缠绕成型及性能表征[J]. 玻璃钢/复合材料, 2014(4): 54-57.
[14] WANG X, XU D, LIU H, et al. Effects of thermal residual stress on interfacial properties of polyphenylene sulphide/carbon fibre (PPS/CF) composite by microbond test[J]. Journal of Materials Science, 2016, 51(1): 334-343.
[15] 姜正飞, 朱姝, 孙泽玉, 等. 纺织结构碳纤维增强聚苯硫醚基复合材料的制备与力学性能[J]. 复合材料学报, 2013, 30(s1): 112-117.
[16] 乔允允, 李俊峰, 姜燕, 等. 表面处理对碳纤维/聚苯硫醚复合材料性能的影响[J]. 合成纤维工业, 2017, 40(5): 7-11.
[17] 张坤. 环氧树脂对聚苯硫醚/碳纤维复合材料界面的改性研究[C]//2012年全国高分子材料科学与工程研讨会. 武汉: 2012: 233-234.
[18] 张坤, 龚跃武, 张守玉, 等. 界面改性剂对聚苯硫醚/碳纤维复合材料力学和热力学性能的影响[J]. 塑料工业, 2013, 41(1): 100-103.
[19] LIU B Y, WANG X J, LIU H Y, et al. Effect of silane coupling agent and air plasma treatment on interfacial shear strength of carbon fiber/polyphenylene sulfide composites[C]//Recent Advances in St-ructural Integrity Analysis-Proceedings of the International Congress (APCF/SIF-2014). Oxford: Woodhead Publishing, 2014: 365-369.
[20] SUN Y, LU Y, YANG C. Stripping mechanism of PAN-based carbon fiber during anodic oxidation in NaOH electrolyte[J]. Applied Surface Science, 2019, 486: 128-136.
[21] WU Y, LIU Q, HENG Z, et al. Improved mechanical properties of graphene oxide/short carbon fiber-polyphenylene sulfide composites[J]. Polymer Composites, 2019, 40(10): 3866-3876.
[22] 姜正飞. 碳纤维织物增强聚苯硫醚基复合材料成型工艺及性能[D]. 上海: 东华大学, 2014.
[23] 景鹏展, 朱姝, 余木火, 等. 基于碳纤维表面修饰制备碳纤维织物增强聚苯硫醚(CFF/PPS)热塑性复合材料[J]. 材料工程, 2016, 44(3): 21-27.
[24] HU J, LI F, WANG B, et al. A two-step combination strategy for significantly enhancing the interfacial adhesion of CF/PPS composites: The liquid-phase oxidation followed by grafting of silane coupling agent[J]. Composites Part B: Engineering, 2020, 191: 1-12.
[25] 汪永花, 张寿春, 刘沛沛, 等. 聚酰亚胺改性炭纤维增强聚苯硫醚复合材料的制备及表征[J]. 新型炭材料, 2019, 34(1): 68-74.
[26] DONG Y, YU T, WANG X, et al. Improved interfacial shear strength in polyphenylene sulfide/carbon fiber composites via the carboxylic polyphenylene sulfide sizing agent[J]. Composites Science and Technology, 2020, 190: 1-9.
[27] ZHANG K, ZHANG G, LIU B, et al. Effect of aminated polyphenylene sulfide on the mechanical properties of short carbon fiber reinforced polyphenylene sulfide composites[J]. Composites Science and Technology, 2014, 98: 57-63.
[28] REN H, XU D, YAN G, et al. Effect of carboxylic polyphenylene sulfide on the micromechanical properties of polyphenylene sulfide/carbon fiber composites[J]. Composites Science and Technology, 2017, 146: 65-72.
[29] 袁霞, 孙义红, 安玉良, 等. 碳纳米管/碳纤维增强聚苯硫醚复合材料研究[J]. 化学与黏合, 2015, 37(1): 11-14.
[30] ZHOU S, ZHANG Q, WU C, et al. Effect of carbon fiber reinforcement on the mechanical and tribological properties of polyamide 6/polyphenylene sulfide composites[J]. Materials & Design, 2013, 44: 493-499.