DAMAGE DETECTION OF COMPOSITE BEAMS BASED ON PROPORTIONAL FLEXIBILITY MATRIX

doi:10.19936/j.cnki.2096-8000.20210328.005

Abstract

Abstract: The LU decomposition of the proportional flexibility matrix is used to construct a new damage index, which is used to detect the delamination damage of composite beams. Firstly, the finite element software ANSYS Workbench is used to construct the simulation models of damaged beam and undamaged beam. The natural frequency and mode shape of the undamaged beam and the damaged beam are obtained by modal analysis. The normalized vibration mode of the unit matrix is calculated, and then the proportional flexibility matrix is constructed. Through LU decomposition of the difference matrix of proportional flexibility before and after damage, a new damage index is constructed to detect the delamination damage of composite beams. The simulation results show that the mutation rate of the damage index has great changes for different degrees of single point and multi-point damage. For different locations of damage, it also has a good recognition effect, and can accurately describe the area of delamination damage. This method shows that the proportional flexibility matrix method can be used to identify the delamination damage of composite beams.

Key words: proportional flexibility matrix, composites, delamination damage, damage detect

CLC Number:

TB332

QI Xing-ran, YANG Tao, DU Yu. DAMAGE DETECTION OF COMPOSITE BEAMS BASED ON PROPORTIONAL FLEXIBILITY MATRIX[J]. COMPOSITES SCIENCE AND ENGINEERING, 2021, 0(3): 33-37.

References

[1] 唐荆, 陈啸, 杨科. 碳纤维复合材料开孔层合板压缩损伤预测和模型比较[J]. 玻璃钢/复合材料, 2019(10): 33-39.
[2] 倪迎鸽, 杨宇, 吕毅, 等. 声发射在复合材料损伤机理研究的应用现状及发展趋势[J]. 玻璃钢/复合材料, 2019(8): 115-126.
[3] BOURCHAK M, FARROW I R, BOND I P, et al. Acoustic emission energy as a fatigue damage parameter for CFRP composites[J]. International Journal of Fatigue, 2007, 29(3): 457-470.
[4] TRAPPE V, HARBICH K W. Intralaminar fatigue behaviour of carbon fibre reinforced plastics[J]. International Journal of Fatigue, 2006, 28(10): 1187-1196.
[5] 赵建华, 罗明, 吴时红, 等. 超声波喷水穿透法在先进复合材料检测中的应用[J]. 宇航材料工艺, 2012, 42(4): 105-108.
[6] 侯哲, 李为民, 段滋华. 复合材料内部缺陷微波无损检测技术的研究[J]. 现代化工, 2014, 34(2): 167-169.
[7] 陈桂才, 吴东流, 程茶园, 等. 复合材料缺陷的红外热波无损检测[J]. 宇航材料工艺, 2004, 34(1): 55-58.
[8] 陈颖, 何双起. 复合材料粘接结构超声声谐振检测技术[J]. 宇航材料工艺, 2011, 41(2): 110-112.
[9] 宋远佳, 张炜, 田干, 等. 基于超声红外热成像技术的复合材料损伤检测[J]. 固体火箭技术, 2012, 35(4): 559-564.
[10] 李永梅, 周锡元, 高向宇. 基于柔度差曲率矩阵的结构损伤识别方法[J]. 工程力学, 2009, 26(2): 188-195.
[11] 姚京川, 杨宜谦, 王澜. 基于模态柔度曲率改变率的桥梁结构损伤识别方法[J]. 中国铁道科学, 2008, 29(5): 51-57.
[12] 于湛卉, 杨涛, 牛雪娟, 等. 基于模态柔度曲率改变率复材简支梁结构损伤识别研究[J]. 玻璃钢/复合材料, 2015(2): 11-15.
[13] 马骏, 陈立, 赵德有. 基于柔度曲率矩阵的加筋板结构损伤识别方法[J]. 船舶力学, 2011, 15(8): 881-891.
[14] 刘小燕, 姜太新, 王光辉. 基于模态柔度矩阵识别结构损伤方法研究[J]. 长沙大学学报, 2017, 31(2): 15-19.
[15] PANDEY A K, BISWAS M, SAMMAN M M. Damage detection from changes in curvature mode shapes[J]. Journal of Sound and Vibration, 1991, 145(2): 321-332.
[16] 安永辉, 欧进萍. 框架结构损伤定位的比例柔度矩阵分解法试验研究[J]. 振动工程学报, 2014, 27(6): 819-826.