RESEARCH PROGRESS ON INTERFACIAL PROPERTIES OF CARBON FIBER REINFORCEDHIGH PERFORMANCE THERMOPLASTIC COMPOSITES

Abstract

Abstract: Carbon fiber reinforced high-performance thermoplastic composites are widely used in aviation, defense industry, railway transportation and other cutting-edge fields due to their superior mechanical properties, ease of processing, and recyclability. The interface is the weak link of carbon fiber reinforced high-performance thermoplastic composites and is one of the key factors affecting its performance. Great attention has been paid to the interface modification of composites. This paper summarizes the influence factors of the interface properties of carbon fiber reinforced high-performance thermoplastic composites, and focuses on the principles and methods of interface modification of carbon fiber reinforced high-performance thermoplastic composites.

Key words: carbon fiber, high-performance, thermoplastic composites, interface modification

CLC Number:

TB332

XING Kai, XU Hai-bing, YAN Chun, CHEN Gang. RESEARCH PROGRESS ON INTERFACIAL PROPERTIES OF CARBON FIBER REINFORCEDHIGH PERFORMANCE THERMOPLASTIC COMPOSITES[J]. Fiber Reinforced Plastics/Composites, 2019, 0(5): 110-115.

References

[1] 贺福. 碳纤维及石墨纤维[M]. 北京: 化学工业出版社, 2010.
[2] Liu D, Zhu Y, Ding J, et al. Experimental investigation of carbon fiber reinforced poly (phenylene sulfide) composites prepared using a double-belt press[J]. Composites Part B: Engineering, 2015, 77: 363-370.
[3] Fernandez B, Arbelaiz A, Valea A, et al. A comparative study on the influence of epoxy sizings on the mechanical performance of woven carbon fiber-epoxy composites[J]. Polymer composites, 2004, 25(3): 319-330.
[4] 李阳, 温月芳, 杨永岗, 等. 环氧树脂上浆剂对 PAN 基碳纤维性能的影响[J]. 合成纤维工业, 2009, 32(2): 1-3.
[5] Li J, Sun F F. The effect of maleic anhydride graft on the interfacial adhesion of carbon fiber reinforced thermoplastic polystyrene composite[J]. Journal of composite materials, 2009, 43(23): 2717-2725.
[6] 曾汉民, 张志毅, 章明秋, 等. CF/PEEK复合材料界面层结构与性能关系研究[J]. 复合材料学报, 1994, 11(2): 81-89.
[7] Shibata M, Fang Z, Yosomiya R. Miscibility and crystallization behavior of poly(ether ether ketone ketone)/poly(ether imide) blends[J]. Journal of Applied Polymer Science, 2015, 80(5): 769-775.
[8] Giraud I, Franceschi-Messant S, Perez E, et al. Preparation of aqueous dispersion of thermoplastic sizing agent for carbon fiber by emulsion/solvent evaporation[J]. Applied Surface Science, 2013, 266: 94-99.
[9] Liu W B, Shu Z, Hao L F, et al. Interfacial shear strength in carbon fiber-reinforced poly(phthalazinone ether ketone) composites[J]. Polymer Composites, 2013, 34(11): 1921-1926.
[10] Yuan H, Zhang S, Lu C. Surface modification of carbon fibers by a polyether sulfone emulsion sizing for increased interfacial adhesion with polyether sulfone[J]. Applied Surface Science, 2014, 317: 737-744.
[11] Park M, Park J H, Yang B J, et al. Enhanced interfacial, electrical, and flexural properties of polyphenylene sulfide composites filled with carbon fibers modified by electrophoretic surface deposition of multi-walled carbon nanotubes[J]. Composites Part A: Applied Science and Manufacturing, 2018, 109: 124-130.
[12] Su Y, Zhang S, Zhang X, et al. Preparation and properties of carbon nanotubes/carbon fiber/poly (ether ether ketone) multiscale composites[J]. Composites Part A: Applied Science and Manufacturing, 2018, 108: 89-98.
[13] Guo Y X, Liu J, Liang J Y. Surface state of carbon fibers modified by electrochemical oxidation[J]. Journal of Materials Science & Technology, 2005, 21(3): 371-375.
[14] Wang Y Q, Zhang F Q, Sherwood P M A. X-ray photoelectron spectroscopic studies of carbon fiber surfaces. 25. Interfacial interactions between PEKK polymer and carbon fibers electrochemically oxidized in nitric acid and degradation in a saline solution[J]. Chemistry of materials, 2001, 13(3): 832-841.
[15] Pan L, Yapici U. A comparative study on mechanical properties of carbon fiber/PEEK composites[J]. Advanced Composite Materials, 2016, 25(4): 359-374.
[16] Li R, Ye L, Mai Y W. Application of plasma technologies in fibre-reinforced polymer composites: a review of recent developments[J]. Composites Part A: Applied Science and Manufacturing, 1997, 28(1): 73-86.
[17] Wu G M. Oxygen plasma treatment of high performance fibers for composites[J]. Materials Chemistry and Physics, 2004, 85(1): 81-87.
[18] Xie J, Xin D, Cao H, et al. Improving carbon fiber adhesion to polyimide with atmospheric pressure plasma treatment[J]. Surface and coatings technology, 2011, 206(2-3): 191-201.
[19] Li W, Yao S Y, Ma K M, et al. Effect of plasma modification on the mechanical properties of carbon fiber/phenolphthalein polyaryletherketone composites[J]. Polymer Composites, 2013, 34(3): 368-375.
[20] Lu C, Chen P, Yu Q, et al. Interfacial adhesion of plasma-treated carbon fiber/poly (phthalazinone ether sulfone ketone) composite[J]. Journal of applied polymer science, 2007, 106(3): 1733-1741.
[21] 王澜 , 王佩璋, 陆晓中. 高分子材料[M]. 北京:中国轻工业出版社, 2011.
[22] Zhang K, Zhang G, Liu B, et al. Effect of aminated polyphenylene sulfide on the mechanical properties of short carbon fiber reinforced polyphenylene sulfide composites[J]. Composites science and technology, 2014, 98: 57-63.
[23] 张坤, 龚跃武, 张守玉, 等. 界面改性剂对聚苯硫醚/碳纤维复合材料力学和热力学性能的影响[J]. 塑料工业, 2013, 41(1): 100-103.
[24] Jian L, Tao S. The mechanical and tribological properties of CF/PPS composite filled with PA6[J]. Journal of Thermoplastic Composite Materials, 2014, 27(5): 594-602.
[25] 曾汉民, 张志毅. 结晶性高聚物基体复合材料的界面结晶效应[J]. 材料工程, 1992 (1): 6-10.
[26] 林志勇, 曾汉民. 热塑性碳纤维复合材料界面研究[J]. 高分子通报, 2004(5): 56-61.
[27] Batista N L, Olivier P, Bernhart G, et al. Correlation between degree of crystallinity, morphology and mechanical properties of PPS/carbon fiber laminates[J]. Materials Research, 2016, 19(1): 195-201.
[28] Liu B, Wang X, Long S, et al. Interfacial micromechanics of carbon fiber-reinforced polyphenylene sulfide composites[J]. Composite Interfaces, 2014, 21(4): 359-369.