Research on microwave curing process for rib composite parts

doi:10.19936/j.cnki.2096-8000.20240928.012

Abstract

Abstract: Compared with the autoclave curing process, the microwave curing process of composite can reduce the curing time, reduce energy consumption, and have good process controllability. This research proposes a special functional auxiliary structure based on theoretical analysis, which solves the microwave heating problem of multi-directional layered carbon fiber composite. The formation of typical composite rib parts has been achieved through microwave curing technology, further promoting the engineering application of composite microwave curing technology. The research results indicate that the basic mechanical properties of composite rib parts manufactured by microwave curing can meet the requirements of engineering applications. Compared with the autoclave curing process, the microwave curing process can shorten the curing cycle by 59.8% and reduce the energy consumption by 61.5%.

Key words: composite, microwave curing, rib part

CLC Number:

TB332

CHENG Libing, XU Weiwei, LI Bo, WEN Shiqi. Research on microwave curing process for rib composite parts[J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 82-86.

References

[1] 沈军, 谢怀勤. 先进复合材料在航空航天领域的研发与应用[J]. 材料科学与工艺, 2008(5): 737-740.
[2] HARRIS C E, STARNES J H, SHUART M J. Design and manufacturing of aerospace composite structures, state-of-the-art assessment[J]. Journal of Aircraft, 2002, 39(4): 545-560.
[3] 江洪, 彭导琦. 先进复合材料在航天航空器中的应用[J]. 新材料产业, 2022(1): 2-7.
[4] 陆孜子. 从0到53%的跨越——复合材料在民机上的应用[J]. 大飞机, 2015(4): 26-27.
[5] 苏鹏, 崔文峰. 先进复合材料热压罐成型技术[J]. 现代制造技术与装备, 2016(11): 165-166.
[6] 文友谊, 文琼华, 李帆, 等. 碳纤维增强树脂基复合材料微波固化技术[J]. 航空制造技术, 2015(S1): 61-64.
[7] LEE W L, SPRINGER G S. Microwave curing of composite materials[J]. Journal of Composite Materials, 1984, 18(4): 387-409.
[8] THOSTENSON E T, CHOU T W. Microwave processing: Fundamentals and applications[J]. Composites Part A: Applied Science and Manufacturing, 1999, 30(9): 1055-1071.
[9] FEHER L. Energy efficient microwave systems[M]. Springer Verl-ag, 2009.
[10] 张青, 常新龙, 张有宏, 等. 碳纤维/环氧树脂复合材料微波固化试验[J]. 宇航材料工艺, 2018, 48(6): 58-62.
[11] 郑立胜, 李远才, 代永朝. 环氧复合材料用微波固化技术及其展望[J]. 玻璃钢/复合材料, 2006(3): 53-56.
[12] ZHOU J, LI Y, LI N, et al. A multi-pattern compensation method to ensure even temperature in composite materials during microwave curing process[J]. Composites Part A: Applied Science and Manufacturing, 2018, 107: 10-20.
[13] 王大为, 李博, 文友谊, 等. 碳纤维增强双马树脂基复合材料微波固化工艺及性能研究[J]. 塑料工业, 2019, 47(6): 108-113.
[14] 王春文, 常新龙, 胡宽, 等. T700碳纤维复合材料预浸料微波固化试验[J]. 兵器装备工程学报, 2021, 42(3): 208-212.
[15] 龙习坤, 李树健, 陈蓉, 等. 树脂基复合材料制件微波固化数值模拟[J]. 复合材料学报, 2023, 40(4): 2415-2426.
[16] 李梦颖, 肖军, 还大军, 等. 湿法分层缠绕T700/环氧复合材料微波固化工艺及性能[J]. 复合材料科学与工程, 2021(12): 89-94.
[17] 王攀, 郭嘉炜, 周靖, 等. 多频能量分散的CFRP层合板微波固化温度场控制方法[J]. 航空制造技术, 2023, 66(17): 96-102.
[18] 徐鄂严. 超材料馈能的多向铺层CFRP层合板微波固化工艺研究[D]. 南京: 南京航空航天大学, 2023.