Study on curing deformation control of C-shaped composite beams

doi:10.19936/j.cnki.2096-8000.20230628.010

Abstract

Abstract: Aiming at the curing deformation of the C-shaped beam structure of the civilian composite material, the simulation prediction models including heat transfer analysis model, curing kinetics analysis model, elastic modulus model, resin shrinkage model are established, and the C-shaped beam shrinkable. The curing deformation of the structure is predicted, and the prediction results have a small error compared to the test results. In this paper, the simulation prediction result of the curing deformation is used to guide the mold type correction adjustment of the C-shaped beam scaled-down component. The modification measurement of the C-shaped beam prepared by the mold adjustment is satisfied with the structural precision requirements, and the effective control of curing deformation of C-shaped beam structure is realized.

Key words: composites, C-shaped beam, curing deformation, analog simulation, deformation control

CLC Number:

TB332

WANG Xuehua, CHEN Junlin, MAN Jiacheng, YUE Guangquan. Study on curing deformation control of C-shaped composite beams[J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(6): 67-72.

References

[1] 岳广全. 整体化复合材料壁板结构固化变形模拟及控制方法研究[D]. 哈尔滨: 哈尔滨工业大学, 2010.
[2] BARAN I, CINAR K, ERSOY N, et al. A review on the mechanical modeling of composite manufacturing processes[J]. Archives of Computational Methods in Engineering, 2017, 24(2): 365-395.
[3] 丁安心, 李书欣, 倪爱清, 等. 热固性树脂基复合材料固化变形和残余应力数值模拟研究综述[J]. 复合材料学报, 2017, 34(3): 471-485.
[4] 元振毅, 王永军, 张跃, 等. 基于材料性能时变特性的复合材料固化过程多场耦合数值模拟[J]. 复合材料学报, 2015, 32(1): 167-175.
[5] 程文礼, 邱启艳, 陈静. 热压罐成型复合材料固化变形机理及控制研究[J]. 材料导报, 2012, 26(Z1) : 410-414.
[6] 张修路, 杜芳静, 黄文超, 等. 飞机复合材料结构固化变形的仿真分析与控制[J]. 航空计算技术, 2019, 49(4): 54-58.
[7] 李彩林, 余宁, 文友谊. 复合材料L型结构固化变形的数值模拟与补偿[J]. 塑料工业, 2016, 44(7): 51-54.
[8] 魏冉, 徐鹏, 孙晶晶, 等. 仿真分析在壁板及前缘结构固化变形预测及控制中的应用[J]. 材料科学与工程学报, 2020, 38(4): 552-559.
[9] FERNLUND G, OSOOLY A, POURSARTIP A. Finite element based predication of processer-induced deformation of autoclaved composite structures using 2D process analysis and 3D structural analysis[J]. Composite Structures, 2003, 62(2): 223-234.
[10] ARAFATH A R A. Efficient numerical techniques for predicting process-induced stresses and deformations in composite structure[D]. Vancouver: University of British Columbia, 2007.
[11] 陈祥宝, 邢丽英, 周正刚. 树脂基复合材料制造过程温度变化模拟研究[J]. 航空材料学报, 2009, 29(2): 61- 65.
[12] BOGETTI T A, GILLESPIE J W. Two-dimensional cure simulation of thick thermosetting composites[J]. Journal of Composite Materials, 1991, 25(3): 239-273.
[13] BOGETTI T A, GILLESPIE J W, MCCULLOUQH R L. Influence of processing on the development of residual stresses in thick section thermoset composites[J]. International Journal of Materials & Product Technology. 1994, 9(1-3): 170-182.

[1]	ZHANG Qian, ZHANG Yifan, ZOU Qi, ZHANG Peng, JIAO Yanan, AN Liuxu, LIU Yanfeng, ZHANG Daijun, HAO Junjie, CHEN Li. Connection performance and failure mechanisms of three-dimensional woven composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 5-11.
[2]	YAN Jiqiang, XIE Zongyou, LI Jun, ZOU Qi, LEI Shuai, CAO Tienan, ZHANG Daijun. Effect of ply angle on anti-high speed impact properties of polyimide fiber reinforced composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 12-18.
[3]	GUO Miaocai. The interlayer structures and lightning strike damage behaviors of the conductive particles modified highly tough composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 28-36.
[4]	LI Moying, ZHENG Linfeng, LIU Gang, LI Mengjiao, YAO Jianan. Adhesion study of carbon fiber/polyaryletherketone thermoplastic composites with epoxy coatings [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 37-42.
[5]	HUANG Daming, TANG Lixin, SUN Juntao, WANG Wei. Research on the effect of residual monomer acrylonitrile on the preparation of PAN-based carbon fiber [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 48-51.
[6]	YAN Chao, RONG Xiaoyuan, ZHAO Yueqing, QIAN Zhongjian. Curing deformation study of composite cobonding omega stringer stiffened panel [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 67-72.
[7]	YAN Lei, ZHAO Fei, HUAN Dajun, ZHANG Shengyuan, WANG Bin, XIAO Jun. Research on tension-tensile fatigue behavior and life prediction of T700/PPS filament winding thermoplastic composites with NOL rings [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 73-81.
[8]	SONG Jianhui, YU Xiaochen, ZHU Yingdan, WU Huaping, ZHANG Xiongjun, CHEN Gang. Advances in fatigue performance of fiber reinforced composite-metal hybrid joints [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 105-112.
[9]	HU Zehui, LI Yong, HUAN Dajun, HAN Bing, GUO Da. Research status and development trend of Z-pin reinforced anti-heat insulation composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 125-132.
[10]	WANG Xiaoming, WANG Xiaobo, CHENG Yanan, ZHANG Chen, QUAN Zhenzhen, ZHANG Hui, LIU Yong, SUN Houli, YU Jianyong. Fabrication and impact performance analysis of carbon/Kevlar fiber hybrid 3D braided composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 5-10.
[11]	LI Jiamin, TAN Lina, JIANG Hanwei, FAN Ruyi, RAN Qichao. Study on properties of epoxy modified benzoxazine resin for RTM technology [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 11-16.
[12]	LING Xujie, CHEN Yinhong, LU Yizhou, FANG Yuan. Study on flame retardant properties and impact properties of flame retardant microcapsule modified glass fiber reinforced polymer composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 17-23.
[13]	MAO Jingqiao, HU Yiling, PANG You, YANG Yuqiu. Preparation and performance study of sizing treated carbon fiber/polypropylene composite molded by CF/PP fiber mat [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 32-38.
[14]	WANG Haoda, ZHU Fuxian, HU Kejun, XU Xianyi. Parametric finite element modeling method for fiber reinforced composite bolted structures [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 53-61.
[15]	XIE Lilai, HU Congliang, DONG Min, YANG Xiaohui, LIU Penghui. Fatigue life calculation method of wind turbine blade based on piecewise linear mean stresses correction [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 62-69.