STUDY ON DEFORMATION CORRECTING TECHNIQUE OF SADDLE-SHAPEDCARBON FIBER COMPOSITE COMPONENT

Abstract

Abstract: Aiming at the deformation of saddle-shaped carbon fiber composite component, the deformation law was obtained by experimental method. Taking the section angle as the parameter, the variation law equation of the deformation parameters was established to predict the solidification deformation of the components. By using CATIA/CAA secondary development technology, the correction software of saddle shape was developed, and the manufacturing error of parts was reduced through actual correction of saddle shape, which proved that this method can effectively reduce deformation and improve the precision of parts.

Key words: saddle shape, composite materials, deformation correction, CATIA secondary development

CLC Number:

TB332

LIU Bao-ming. STUDY ON DEFORMATION CORRECTING TECHNIQUE OF SADDLE-SHAPEDCARBON FIBER COMPOSITE COMPONENT[J]. Composites Science and Engineering, 2020, 0(5): 80-83.

References

[1] 李映红, 赵智姝, 韩勐. 复合材料在飞机结构上的广泛应用[J]. 装备制造技术, 2011(4): 138-140.
[2] 张丽华, 范玉青. 复合材料在飞机上的应用评述[J]. 航空制造技术, 2006(3): 64-66.
[3] 孙振起, 吴安如. 先进复合材料在飞机结构中的应用[J]. 材料导报A, 2015, 29(6): 61-64, 69.
[4] 马立敏, 张嘉振, 岳广全, 等. 复合材料在新一代大型民用飞机中的应用[J]. 复合材料学报, 2015(2): 317-322.
[5] 王衡. 先进复合材料在军用固定翼飞机上的发展历程及前景展望[J]. 纤维复合材料, 2014(4): 41-45.
[6] 高琳. 智能复合材料在航空、航天领域的研究应用[J]. 纤维复合材料, 2014(1): 22-25.
[7] 何颖, 蔡闻峰, 赵鹏飞. 热压罐成型中温固化复合材料模具[J]. 纤维复合材料, 2006(1): 58-59.
[8] Li J, Yao X F, Liu Y H, et al. Curing deformation analysis for the composite T-shaped integrated structures[J]. Appl Compos Mater, 2008(15): 207-225.
[9] 侯进森, 左扬, 黎玉钦. 热压罐工艺对树脂基复合材料性能影响的实验研究[C]//复合材料与节能减排研讨会论文集. 2013: 172-177.
[10] 岳广全, 张嘉振, 张博明. 模具对复合材料构件固化变形的影响分析[J]. 复合材料学报, 2013, 30(4): 206-210.
[11] 李艳霞, 李敏, 张佐光等. L形复合材料层板热压工艺密实变形过程的数值模拟[J]. 复合材料学报, 2008, 25(3): 78-83.
[12] Li J, Yao X F, Liu Y H, et al. A study of the integrated composite material structures under different fabrication processing[J]. Composites: Part A, 2009, 40(4): 455-462.
[13] 袁铁军, 周来水, 葛友华. 热压罐成型复合材料构件的变形预测与应用研究[J]. 制造技术与机床, 2011(7): 145-148.
[14] 袁铁军, 谭昌柏, 郑伟峰, 等. 大厚度复合材料构件固化成型技术的研究[J]. 机械设计与制造, 2013(2): 180-183.
[15] 刘宝明, 项松, 薛继佳, 等. 空间曲面类复合材料构件固化变形修正技术研究[J]. 制造业自动化, 2016, 38(10): 74-76.