VIBRATION ANALYSIS OF CARBON FIBER COMPOSITE MOTOR FRAME

Fiber Reinforced Plastics/Composites ›› 2019, Vol. 0 ›› Issue (8): 94-97.

• APPLICATION RESEARCH • Previous Articles Next Articles

VIBRATION ANALYSIS OF CARBON FIBER COMPOSITE MOTOR FRAME

YANG Hai-ru^1,2, LI Xiong³, CHEN Guo-zhi^2*

1.School of Mechanical-electronic and Automobile Engineering, Huanggang Normal University, Huanggang 438000, China;
2.School of Mechanicel and Electronic Engineering, Wuhan University of Technology, Wuhan 430070, China;
3.Wuhan China Star Optoelectronics Technology, Wuhan 430070, China

Received:2019-04-30 Online:2019-08-28 Published:2019-08-28

Abstract

Abstract: In this paper, a carbon fiber reinforced polymer (CFRP) motor frame is designed, which is similar to the metal motor frame. The Abaqus finite element analysis software is used for the modal analysis of the motor base. The natural frequencies and harmonic responses of the CFRP motor frame are obtained and compared with those of the metal motor frame. The results show that the natural frequencies of the CFRP motor frame are much higher than those of the metal motor. By comparing the natural frequencies of the metal frame, it is proved that CFRP motor base has advantages of low vibration.

Key words: CFRP motor frame, modal analysis, harmonic response analysis

CLC Number:

TB332

YANG Hai-ru, LI Xiong, CHEN Guo-zhi. VIBRATION ANALYSIS OF CARBON FIBER COMPOSITE MOTOR FRAME[J]. Fiber Reinforced Plastics/Composites, 2019, 0(8): 94-97.

References

[1] Lin H, Xiang Y, Yang Y. Coupled vibration analysis of cfrp cable-tube system under parametric excitation in submerged floating tunnel[J]. Procedia Engineering, 2016, 166(5): 45-52.
[2] Khazaei P M, Nateghi-Alahi F, Zhao X L . Experimental testing on CFRP strengthened thin steel plates under shear loading[J]. Thin-Walled Structures, 2016, 109(1): 217-226.
[3] Capozucca R, Bonci B. Notched CFRP laminates under vibration[J]. Composite Structures, 2015, 122(3): 367-375.
[4] 刘畅. 复合材料桁架的振动特性及减振研究[D]. 哈尔滨: 哈尔滨工业大学, 2012.
[5] Hong Y, He X D, Wang R G. Vibration and damping analysis of a composite blade[J]. Materials and Design, 2012, 34(1): 98-105.
[6] Wollmann T, Modler N, Dannemann M, et al. Design and testing of composite compressor blades with focus on the vibration behaviour[J]. Composites Part A: Applied Science and Manufacturing, 2017, 92(5): 183-189.
[7] Billups E K, Cavalli M N. 2D damping predictions of fiber composite plates: Layup effects[J]. Composites Science and Technology, 2008, 68(3-4): 727-733.
[8] Jessen N C, Nielsen H U, Schroll J. CFRP lightweight structures for extremely large telescopes[J]. Composite Structures, 2008, 82(2): 310-316.
[9] Yang J S, Ma L, Rüdiger S, et al. Hybrid lightweight composite pyramidal truss sandwich panels with high damping and stiffness efficiency[J]. Composite Structures, 2016, 148(1): 85-96.
[10] 熊长丽. 碳纤维复合材料汽车B柱加强板的轻量化设计研究[D]. 长春: 吉林大学, 2018.
[11] 杨睿. 碳纤维复合材料传动轴的动力学特性研究[D]. 武汉: 武汉理工大学, 2013.
[12] 高洪平, 孙泽玉, 陶雷, 等. 复合材料模量对汽车传动轴固有频率的影响[J]. 玻璃钢/复合材料, 2018(5): 59-64.
[13] 朱帅. 复合材料旋转轴的有限元动力学分析与实验研究[D]. 青岛: 山东科技大学, 2017.
[14] 杨海如, 马祥禹, 喻国铭, 等. 碳纤维复合材料风力发电机叶片振动特性研究[J]. 玻璃钢/复合材料, 2018(9): 70-73.
[15] 蒋晓东, 李岩, 夏加宽. 永磁同步电动机机座振动模态仿真分析[J]. 微电机, 2013, 46(12): 12-16.
[16] Druesne, Hallal J, Lardeur P, et al. Modal stability procedure applied to variability in vibration from electromagnetic origin for an electric motor[J]. Finite Elements in Analysis and Design, 2016, 122(1): 61-74.
[17] 任鸣. 基于abaqus仿真的电动机振动特性分析及振动故障诊断[D]. 天津: 天津大学, 2014.

VIBRATION ANALYSIS OF CARBON FIBER COMPOSITE MOTOR FRAME

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 6

Recommended Articles

Metrics

Comments

[1]	SHEN Zhi-yong, MA Xiu-yuan. VIBRATION FREQUENCY ANALYSIS AND EXPERIMENTAL STUDY OF WET DESULFURIZATION FRP FLUE IN COAL-FIRED POWER PLANT [J]. Fiber Reinforced Plastics/Composites, 2019, 0(8): 82-86.
[2]	CHEN Cai-feng,YANG Jie,CHENG Bin*,LI Xi-yang. STRESS AND MODEL ANALYSIS OF THE BLADE OF A ROTATING WIND TURBINE UNDER THE CONDITION OF ICING [J]. Fiber Reinforced Plastics/Composites, 2018, 0(7): 26-30.
[3]	LI Zheng-nong, ZHU Sheng-bing, PAN Yue-yue. RESEARCH ABOUT THE EFFECT OF ICING STIFFNESS AND MASS ON THE MODE OF LARGE WIND TURBINE BLADE [J]. Fiber Reinforced Plastics/Composites, 2018, 0(10): 82-89.
[4]	DING Jun. VIBRATION RESPONSE ANALYSIS AND TEST VERIFICATION FOR A SHIP RADOME [J]. Fiber Reinforced Plastics/Composites, 2017, 0(12): 72-76.
[5]	ZHAO Na, GAO Yang. STUDY ON THE FEM SIMULATION FOR THE STATIC TEST OF WIND TURBINE BLADE [J]. COMPOSITES SCIENCE AND ENGINEERING, 2014, 0(8): 41-43.
[6]	XU Zhen-yu, SHI Peng, LI Sha. NUMERICAL AND EXPERIMENTAL ANALYSIS OF THE NATURAL DYNAMIC CHARACTERISTICS OF COMPOSITE HUB [J]. COMPOSITES SCIENCE AND ENGINEERING, 2013, 0(8): 9-11.