STUDY ON DEFORMATION OF COMPOSITES OF ARAMID FIBER/CARBON FIBER COMPOUND STRUCTURE

Abstract

Abstract: Resin matrix composites possess the advantages of high specific strength, high specific modulus, high designability, strong corrosion resistance and integration molding, which have been widely used in the fields of aerospace, vehicles, ships, electronics, etc. In some practical application fields, different resin matrix composites need to be compound to obtain functional composites with excellent comprehensive properties that single resin matrix composites don′t possess. When different kinds of resin matrix composites are combined, their respective degree of size change with the change of temperature is different during the compound thermal process because of the difference of their thermal expansion coefficient, which creates the internal stress of the compound structure and eventually lead to a certain deformation. In this paper, the influence of compound process (compound temperature and compound pressure), compound methods (secondary bonding and co-bonding), the pre-deformation of aramid fiber composite on the deformation of the composite of aramid fiber/carbon fiber compound structure were studied. The results show that the deformation of the compound structure can be decreased obviously with the decrease of compound temperature. When the compound temperature drops from 180 ℃ to 120 ℃, the deformation of the compound structure decreases by 80%. Appropriate increase of compound pressure contributes to decrease the deformation of the compound structure, whereas the deformation is no longer decreased when compound pressure reaches 0.3 MPa. Aramid fiber-carbon fiber secondary bonding (aramid fiber composite and carbon fiber composite both have been cured completely before they are combined) and carbon fiber-aramid fiber dry-wet co-bonding (carbon fiber composite have been cured completely, while aramid fiber is not cured before they are combined) are beneficial to decrease the deformation of compound structure compared by aramid fiber-carbon fiber dry-wet co-bonding (aramid fiber composite have been cured completely, while carbon fiber is not cured before they are combined). The pre-deformation of aramid fiber composite is an effective way of the deformation control of compound structure.

Key words: compound structure, deformation, compound process, secondary bonding, co-bonding, pre-deformation

CLC Number:

TB332

WU si-bao, LI song-ming, LU hai-jun. STUDY ON DEFORMATION OF COMPOSITES OF ARAMID FIBER/CARBON FIBER COMPOUND STRUCTURE[J]. Fiber Reinforced Plastics/Composites, 2019, 0(6): 90-94.

References

[1] 邢丽英, 包建文, 礼嵩明, 等. 先进树脂基复合材料发展现状和面临的挑战[J]. 复合材料学报, 2016, 33(7): 1327-1338.
[2] 嵇培军, 王国勇, 赵亮, 等. 树脂基结构复合材料的研究进展[J]. 宇航材料工艺, 2015, 45(4): 1-5.
[3] 刘东, 王钧. 碳纤维导电复合材料的研究与应用[J]. 玻璃钢/复合材料, 2001(6): 18-20.
[4] 靳武刚. 碳纤维在电磁屏蔽材料中的应用[J]. 现代塑料加工应用, 2004, 16(1): 24-27.
[5] 赵东林, 高云雷, 沈曾民. 螺旋形碳纤维结构吸波材料的制备及性能研究[J]. 安全与电磁兼容, 2009, 21(6): 60-63.
[6] 孟辉. 纤维型雷达隐身吸波材料的研究进展[J]. 现代涂料与涂装, 2005, 8(6): 8-11.
[7] 陈虹, 虎龙, 艾青松, 等. 芳纶复合材料在防弹车上的应用研究[J]. 中国个体防护装备, 2017, 25(2): 5-8.
[8] 王煦怡, 陈超峰, 彭涛, 等. 芳纶Ⅲ在复合材料领域应用的优势探讨[J]. 合成纤维, 2016, 45(1): 22-25.
[9] 陈燕梅, 侯梅, 张银锋, 等. 高性能芳纶绝缘拉杆用树脂配方及性能研究[J]. 纤维复合材料, 2016, 33(3): 3-7.
[10] 李承宇, 王会阳. 硼纤维及其复合材料的研究及应用[J]. 塑料工业, 2011, 39(10): 1-4.
[11] 谢菲, 夏洪山. 石英纤维复合材料作为高频透波雷达天线罩的研究[J]. 兵器装备工程学报, 2015, 36(3): 147-150.
[12] 樊威, 孟家光, 孙润军, 等. 混杂纤维增强结构隐身复合材料研究进展[J]. 纺织导报, 2017, 36(1): 66-68.
[13] 刘含洋, 赵伟栋, 潘玲英, 等. 结构、耐热、透波功能一体化石英/聚酰亚胺研究[J]. 航空材料学报, 2015, 35(4): 34-38.
[14] 丁安心, 李书欣, 倪爱清, 等. 热固性树脂基复合材料固化变形和残余应力数值模拟研究综述[J]. 复合材料学报, 2017, 34(3): 471-485.
[15] 李敏, 张宝艳. 不对称铺层复合材料变形规律的实验研究[J]. 玻璃钢/复合材料, 2006(5): 28-31.