RESEARCH OF OUT OF AUTOCLAVE COMPOSITE POROSITY

Abstract

Abstract: The influence of out of autoclave(OOA) process is researched and influencing factor of different prepreg, curing process and sealing ways on the porosity of OOA composite is analyzed. The result shows that the resin film coating method of prepreg has great influence on the porosity of products with OOA process. The porosity of products is lower than that double-sided covering when the resin film is one-sided covering. Increasing temperature platform properly is propitious to the air out before the resin gelated and the porosity of final products is lower than that without temperature platform. Using the sealing way of more material to guide air is propitious to squeezing the air produced in the prepreg folding and volatilizing, which will and finally get products with lower porosity.

Key words: composite, OOA, porosity, prepreg, bagging

CLC Number:

TB332

YUAN Chao, CHENG Wen-li, CHEN Jing. RESEARCH OF OUT OF AUTOCLAVE COMPOSITE POROSITY[J]. Fiber Reinforced Plastics/Composites, 2019, 0(12): 89-93.

References

[1] 吴志恩. 飞机复合材料构件成本问题的技术分析及改进措施[J]. 航空制造技术, 2009(15): 50-52.
[2] 杜善义. 先进复合材料与航空航天[J]. 复合材料学报, 2007, 24(1): 1-12.
[3] 杨茂伟, 刘建, 刘振濮, 等. 非热压罐成型低孔隙率复合材料技术研究进展[J]. 宇航材料工艺, 2016(6): 21-25.
[4] 刘亚威. 基于真空袋的预浸料非热压罐制造技术的发展[J]. 国防制造技术, 2013, 10(5): 17-20.
[5] Grunenfelder L, Nutt S R. Void formation in composite prepers-Effect of dissolved moisture[J]. Composites Science and Technology, 2010, 70(16): 2304-2309.
[6] 唐见茂. 航空航天复合材料非热压罐成型研究进展[J]. 航天器环境工程, 2014, 31(6): 577-583.
[7] Scott L, Steve H, Jim S. Vacuum bag only processing; improving prepreg out-time and porosity for large composite structure[C]//Society for the Advancement of Material and Process Engineering (SAMPE). Seattle, WA: 2010.
[8] Mark S, Thomas C, Andrew G. The development of out of autoclave composite prepreg technology for aerospace applications[C]//Society for the Advancement of Material and Process Engineering (SAMPE). Long Beach, CA: 2011.
[9] Steve M, Matthew J S, Elizabeth O. Product development for out of autoclave (OOA) manufacture of aerospace structures[C]//Society for the Advancement of Material and Process Engineering (SAMPE). Seattle, WA: 2010.
[10] Thorfinnson B, Biermann T. Production of viod free composite parts without debulking [C]//31^st International SAMPE Symposium. Las Vegas, NV: Society for the Advancement of Material and Process Engineering, 1986: 480-490.
[11] Thorfinnson B, Biermann T. Degree of impregnation of prepregs-effects on porosity [C]//32^st International SAMPE Symposium. Anaheim, CA: Society for the Advancement of Material and Process Engineering, 1987: 1500-1509.
[12] 陈帅金, 徐辰, 吴国庆, 等. 非热压罐预浸料制备及成型工艺研究[J]. 玻璃钢/复合材料, 2017(3): 90-95.
[13] Centea T, Hubert P. Modelling the effect of material properties and process parameters on tow impregnation in out-of-autoclave prepregs[J]. Composites Part A: Applied Science and Manufacturing, 2012, 43(9): 1505-1513.
[14] Grunenfelder L K, Centea T, Hubert P. Effect of room-temperature out-time on tow impregnation in an out-of-autoclave prepreg[J]. Composites Part A: Applied Science and Manufacturing, 2013, 45(1): 119-126.
[15] 程文礼, 袁超, 邱启艳, 等. 航空用蜂窝夹层结构及制造工艺[J]. 航空制造技术, 2015(7): 93-97.