INFLUENCE OF LAMINATED STRUCTURE(THICKNESS) ON GLASS FIBER REINFORCED PLASTIC FLUE GAS PIPE′S TENSILE PROPERTIES

Abstract

Abstract: Fiber reinforced resin matrix composites are highly configurable. In this paper, the influence of the glass fiber fabric/vinyl ester resin composite laminate structure on the tensile properties of the fiber reinforced plastic exhaust cylinder of coal-fired power plants was studied. A variety of ply structures were designed, and the plywood was prepared by a winding forming method. The tensile properties were tested according to the corresponding national standards. The results show that the tensile properties of the laminate are related to the basic layup structure and the number of cycles (thickness). When designing the glass fiber reinforced plastic exhaust pipe, the mechanical properties and comprehensive cost should be considered comprehensively.

Key words: exhaust tube, layered structure, tensile properties

CLC Number:

TB332

WANG Jun, LI Chen-song, WANG Tao, HOU Rui-gang. INFLUENCE OF LAMINATED STRUCTURE(THICKNESS) ON GLASS FIBER REINFORCED PLASTIC FLUE GAS PIPE′S TENSILE PROPERTIES[J]. Fiber Reinforced Plastics/Composites, 2018, 0(11): 83-86.

References

[1] 康虎, 张国飞. 浅析玻璃钢烟囱在火电厂中应用发展趋势[J]. 电力勘测设计, 2013(5): 42-45.
[2] 杨小兵, 田树桐. 玻璃钢在燃煤电厂湿烟囱中的应用研究[J]. 玻璃钢/复合材料,2011(2): 39-42.
[3] 叶列平, 冯鹏. FRP在工程结构中的应用与发展[J]. 土木工程学报, 2006, 39(3): 24-36.
[4] 尹洪峰, 魏剑. 复合材料[M]. 北京: 冶金工业出版社, 2010: 55-57.
[5] 王震鸣. 复合材料力学和复合材料结构力学[M]. 北京: 机械工业出版社, 1990: 11-14.
[6] Standard guide for design, fabrication, and erection of fiber glass re-inforced plastic chimney liners with coal-fired units: D 5364-93 (Reapproved 2002)[S].
[7] Gebhart S, Pennline D, Brodsky I, et al. Pleasant prairie power plant air quality control upgrade project, pleasant praire, wisconsin[J]. Power, 2007, 151(10).
[8] Kelley D. The use of FRP in FGD applications[J]. Reinforced Plastics, 2007, 51(1):14-19.
[9] Okuda S, Sakamoto T, Mukai T, et al. Design and evaluation of chimney liners for a new system power plant using fiberglass reinforced plastics[J]. Materials & Corrosion, 2015, 40(8): 500-511.
[10] 周继凯, 杜钦庆, 陈礼和, 等. GFRP筋拉伸力学性能尺寸效应试验研究[J]. 河海大学学报, 2008, 36(2): 242-247.
[11] 王宝来, 王振清, 梁军, 等. 三维四向编织复合材料的拉伸尺寸效应研究[J]. 固体力学学报, 2011, 32: 53-59.
[12] Zehnder N, Ermanni P. A methodology for the global optimization of laminated composite structures[J]. Composite Structures, 2006, 72(3): 311-320.
[13] Liu B, Haftka R T, Akgün M A, et al. Permutation genetic algo-rithm for stacking sequence design of composite laminates[J]. Computer Methods in Applied Mechanics & Engineering, 2000, 186(2-4): 357-372.
[14] Lin C C, Lee Y J. Stacking sequence optimization of laminated composite structures using genetic algorithm with local improvement[J].Composite Structures, 2004, 63(3-4): 339-345.
[15] Soremekun G, Gürdal Z, Haftka R T, et al. Composite laminate design optimization by genetic algorithm with generalized elitist selection[J]. Computers & Structures, 2001, 79(2): 131-143.
[16] Muc A, Gurba W. Genetic algorithms and finite element analysis in optimization of composite structures[J]. Composite Structures, 2001, 54(2-3): 275-281.
[17] Park J H, Hwang J H, Lee C S, et al. Stacking sequence design of composite laminates for maximum strength using genetic algorithms[J]. Composite Structures, 2001, 52(2): 217-231.
[18] Erdal O, Sonmez F O. Optimum design of composite laminates for maximum buckling load capacity using simulated annealing[J]. Composite Structures, 2005, 71(1): 45-52.
[19] Callahan K J, Weeks G E. Optimum design of composite laminates using genetic algorithms[J]. Composites Engineering, 1992, 2(3): 149-160.
[20] Riche R L, Haftka R T. Optimization of laminate stacking sequence for buckling load maximization by genetic algorithm[J]. Aiaa Journal, 1993, 31(5): 951-956.