TRIAL PRODUCTION AND PERFORMANCE STUDY OF COMPOSITE MATERIAL UNDERPAN OF AIR CONDITION

Abstract

Abstract: Nowadays, most of underpan of air condition is made of galvanized steel sheet, which has the disadvantages of corrosive rust and big noise. To solve this problem, the idea of using composite material instead of galvanized steel sheet for the underpan of air condition was proposed in this paper. The sample was made of glass-fiber reinforced phenolic composites and fibre-glass reinforced polyester, respectively. The properties of samples were tested and the test results proved that this scheme is feasible. The bending strength, bending modulus and the tensile strength of the sample made of glass fiber reinforced phenolic reaches 302.19MPa, 25.53GPa and 102.95MPa, respectively. At last, the products also passed the load test.

Key words: glass-fiber reinforced plastics, composites, phenolic, polyester, glass-fiber, underpan of air condition

CLC Number:

YAN Meng-xue. TRIAL PRODUCTION AND PERFORMANCE STUDY OF COMPOSITE MATERIAL UNDERPAN OF AIR CONDITION[J]. COMPOSITES SCIENCE AND ENGINEERING, 2015, 0(8): 47-50.

[1]	ZHANG Qian, ZHANG Yifan, ZOU Qi, ZHANG Peng, JIAO Yanan, AN Liuxu, LIU Yanfeng, ZHANG Daijun, HAO Junjie, CHEN Li. Connection performance and failure mechanisms of three-dimensional woven composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 5-11.
[2]	YAN Jiqiang, XIE Zongyou, LI Jun, ZOU Qi, LEI Shuai, CAO Tienan, ZHANG Daijun. Effect of ply angle on anti-high speed impact properties of polyimide fiber reinforced composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 12-18.
[3]	GUO Miaocai. The interlayer structures and lightning strike damage behaviors of the conductive particles modified highly tough composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 28-36.
[4]	LI Moying, ZHENG Linfeng, LIU Gang, LI Mengjiao, YAO Jianan. Adhesion study of carbon fiber/polyaryletherketone thermoplastic composites with epoxy coatings [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 37-42.
[5]	HUANG Daming, TANG Lixin, SUN Juntao, WANG Wei. Research on the effect of residual monomer acrylonitrile on the preparation of PAN-based carbon fiber [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 48-51.
[6]	YAN Lei, ZHAO Fei, HUAN Dajun, ZHANG Shengyuan, WANG Bin, XIAO Jun. Research on tension-tensile fatigue behavior and life prediction of T700/PPS filament winding thermoplastic composites with NOL rings [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 73-81.
[7]	SONG Jianhui, YU Xiaochen, ZHU Yingdan, WU Huaping, ZHANG Xiongjun, CHEN Gang. Advances in fatigue performance of fiber reinforced composite-metal hybrid joints [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 105-112.
[8]	HU Zehui, LI Yong, HUAN Dajun, HAN Bing, GUO Da. Research status and development trend of Z-pin reinforced anti-heat insulation composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 125-132.
[9]	WANG Xiaoming, WANG Xiaobo, CHENG Yanan, ZHANG Chen, QUAN Zhenzhen, ZHANG Hui, LIU Yong, SUN Houli, YU Jianyong. Fabrication and impact performance analysis of carbon/Kevlar fiber hybrid 3D braided composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 5-10.
[10]	LI Jiamin, TAN Lina, JIANG Hanwei, FAN Ruyi, RAN Qichao. Study on properties of epoxy modified benzoxazine resin for RTM technology [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 11-16.
[11]	LING Xujie, CHEN Yinhong, LU Yizhou, FANG Yuan. Study on flame retardant properties and impact properties of flame retardant microcapsule modified glass fiber reinforced polymer composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 17-23.
[12]	MAO Jingqiao, HU Yiling, PANG You, YANG Yuqiu. Preparation and performance study of sizing treated carbon fiber/polypropylene composite molded by CF/PP fiber mat [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 32-38.
[13]	WANG Haoda, ZHU Fuxian, HU Kejun, XU Xianyi. Parametric finite element modeling method for fiber reinforced composite bolted structures [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 53-61.
[14]	XIE Lilai, HU Congliang, DONG Min, YANG Xiaohui, LIU Penghui. Fatigue life calculation method of wind turbine blade based on piecewise linear mean stresses correction [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 62-69.
[15]	FENG Xuebin, WANG Bowen, ZHANG Wenwei, DENG Hang, LIU Penghui. Life prediction method of wind turbine blade flapping fatigue test based on CLD model [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 70-74.

TRIAL PRODUCTION AND PERFORMANCE STUDY OF COMPOSITE MATERIAL UNDERPAN OF AIR CONDITION

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments