AN EXPERIMENTAL STUDY OF 100kW BLADE WITH FLATBACK AND THICK AIRFOILS UNDER STATIC LOAD

Abstract

Abstract: Increasingly large-sized wind turbine blade brings many design and production problems, static experimental of blade is the important foundation and verification means, which can be used to analyze the structure stability of the blade. This paper presents the static experimental study of the 100kW experimental blade with flatback and thick airfoils, which was designed by project team. The bucking and strain behavior of flapwise and edgewise are analyzed. Performance of the blade, including buckling and strain under the action of load is investigated, the structural performance advantages are compared with the traditional blade with sharpedge and the blade with flatback. At last, the results of failure experimental are compared with the design value to analyze the error generation causes.

Key words: flatback, blade, static experiment, buckling, strain

CLC Number:

TB332
TK83

XU Li-jun, XU Lei, YANG Ke. AN EXPERIMENTAL STUDY OF 100kW BLADE WITH FLATBACK AND THICK AIRFOILS UNDER STATIC LOAD[J]. COMPOSITES SCIENCE AND ENGINEERING, 2015, 0(7): 39-44.

References

[1] 许晓燕, 颜鸿斌, 李东. 风机叶片静载荷和模态测试技术[J]. 宇航材料工艺, 2011, (2): 43-46.
[2] B B, V D J, V D D. European wind turbine testing procedure development. SMT4-CT96-2116, Subtask2: Fina l Report B lade testing m ethods, ECN-C-00-055[R]. 2000.
[3] W D M, M E C, N E. Comparison o f strength and load-based methods for testing wind turbine blades, NREL/CP-440-21979, CONF-970135-9. United[R]. 1996.
[4] E R J, K K B, M M. Full scale testing of wind turbine blade to failure-flapwise loading, Rio-R-1392(EN), ISBN 87-550-3184-6; ISBN 87[R]. 2004.
[5] F M J, B G F, J A. Structural testing and numerical simulation of a 34m composite wind turbine blade[J]. Composite Structures, 2006, 76(1/2): 52-61.
[6] L C T O, E L, O T T. Structural collapse of a wind turbine blade. Part A: Static test and equivalent single layered models[J]. Composites Part a: Applied Science and MANU Fact, 2010, 41(2): 257-270.
[7] 曹人靖, 刘道新. 水平轴风力机风轮静态结构特性试验研究[J]. 太阳能学报, 2001, 22(4): 436-439.
[8] 周鹏展, 肖加余, 曾竞成, 等. 基于ANSYS的大型复合材料风力机叶片结构分析[J]. 国防科技大学学报, 2010, 32(2): 46-50.
[9] 叶枝全, 马昊, 丁康, 等. 水平轴风力机桨叶的实验模态分析[J]. 太阳能学报, 2011, 22(4): 473-476.
[10] 马昊, 叶枝全, 包能胜, 等. 水平轴风力机桨叶计算模态分析[J]. 太阳能学报, 2002, 23(3): 361-365.
[11] 林钧斌, 庄骏, 孙斌, 等. 风电机组机械载荷测试研究[J]. 机械制造, 2013, 51(587): 65-67.
[12] 黄永东. 测试技术在风电叶片静力试验的应用[J]. 东方汽轮机, 2009, 增刊: 40-45.
[13] 张春友, 赵华洋, 于立波. 小型风力发电机叶片静载实验研究[J]. 内蒙古民族大学学报(自然科学版), 2009, 24(3): 308-310.
[14] 赵旭, 王祥云, 薛榕融. 风力机复合材料叶片静强度分析与铺层设计[J]. 西北工业大学学报, 2012, 30(6): 825-829.
[15] 杨婷, 杜文超, 杨贺, 等. 风电叶片静载荷应变测试实验[J]. 实验室研究与探索, 2011, 30(11): 33-39.
[16] US S, TOLU S. Struetural Design and Analysis of Wind Turbine Rotor Blades Using Laminated Sandwich Composites[C]. Earth & Spae, 2004. 492-498.
[17] MCKITRRICK L R, CAIRNS D S, MANDELL J, et al. Analysis of a Composite Blade Design for the AOC10/50 Wind Turbine using a Finite Element Mode, Report SAND 2001-144 [R]. 2001.