CURRENT RESEARCH AND FUTURE DEVELOPMENT OF SCARF REPAIR FOR COMPOSITE COMPONENT

Abstract

Abstract: The rapid increasing in the usage of composite materials in modern aircraft leads to an immediate and active demand on composite structure repair technologies with high efficiency and reliability. Scarf repair of composite material has been proved to be an important and advanced repairing technology. Firstly, the architecture of scarf repair was introduced. Then, the detail surveys on key technologies of scarf repair were summarized. Finally, some challenges and the future directions were presented. The scarf repair provided support for design, manufacturing, operation in aircraft lifecycle. It also improved safety and reduced cost of aircraft.

Key words: scarf repair, composite material, repair, aircraft

CLC Number:

TB332

HE Qiang, YANG Wen-feng, TANG Qing-ru. CURRENT RESEARCH AND FUTURE DEVELOPMENT OF SCARF REPAIR FOR COMPOSITE COMPONENT[J]. COMPOSITES SCIENCE AND ENGINEERING, 2015, 0(4): 85-90.

References

[1] 王跃全. 飞机复合材料结构修理设计渐进损伤分析[D]. 南京:南京航空航天大学, 2010.
[2] 方尚庆. 复合材料层压板修理后动力学特性和稳定性影响研究[D]. 上海:上海交通大学, 2012.
[3] 孙九亮. 复合材料风机叶片无损检测技术应用综述[J]. 玻璃钢/复合材料, 2014,4: 81-84.
[4] Pavlopoulou S, Soutis C, Manson G. Non-destructive inspection of adhesively bonded patch repairs using lamb waves[J]. Plastics Rubber and Composites, 2012, 41(2):61-68.
[5] Garnier C, Simpson G, Eyma F, et al. The detection of aeronautical defects in situ on composite structures using non-detective testing[J]. Composite Structure, 2011, 93(5):1328-1336.
[6] Dubois M, Drake T E. Evolution of industrial laser-ultrasonic systems for the inspection of composites[J]. Nondestructive Testing and Evaluation, 2011, 26(4):213-228.
[7] Krishnapillai M, Jones R, Marshall H, et al. Thermograph as a tool for damage assessment [J]. Composite Structures, 2005, 67 (2):149-155.
[8] Avdelidis N P, Hawtin B C, Almond D P. Transient thermography in the assessment of defects of aircraft composites[J]. NDT & E International, 2003, 36(6):433-439.
[9] Genest M, Martinez M, Mrad N, et al. Pulsed thermograph for non-destructive evaluation and damage growth monitoring of bonded repairs[J]. Composite Structures, 2009, 88(1):112-120.
[10] Hung Y Y, Luo W D, Lin L, et al. Evaluating the soundness of bonding using shearography[J]. Composite Structures, 2000, 50(4):353-362.
[11] 赫晓东, 赵俊青, 王荣国, 等. 复合材料压力容器无损检测研究现状[J]. 哈尔滨工业大学学报, 2009, 41(12):78-82.
[12] 顾国庆, 王开福. 复合材料层合板低俗冲击损伤激光散斑干涉无损检测研究[J]. 应用激光, 2012, 32(6):527-531.
[13] 梁艳琴, 余音, 汪海. 民机复合材料结构修理容限研究[J]. 固体力学学报, 2011, 32 (10) :188-193.
[14] 陈绍杰. 复合材料结构修理指南[M]. 北京:航空工业出版社, 2001. 39-44.
[15] 童谷生. 复合材料结构修理容限的确定[J]. 机械工程材料, 2004, 28(7):12-15.
[16] Wang C H, Gunnion A J. On the design methodology of scarf repairs to composite laminates[J]. Composites Science and Technology, 2008, 68(1):35-46.
[17] Tong L, Sun X. Adhesive elements for stress analysis of bonded patch to curved thin-walled structures[J]. Computational Mechanics, 2003, 30(2):143-154.
[18] Campilho R, Demoura M, Domingues J. Stress and failure analyses of scarf repaired CFRP laminates using a cohesive damage model[J]. Journal of Adhesion Science Technology, 2007, 21(9):855-870.
[19] 程小全, 赵文漪, 高宇剑, 等. 胶粘剂性能对挖补修理层合板拉伸性能的影响[J]. 北京航空航天大学学报, 2013, 39(9):1144-1149.
[20] 赵培仲,胡芳友,黄旭仁, 等. 复合材料粘接修理结构中胶层的应力分布[J]. 玻璃钢/复合材料, 2012, 4:65-69.
[21] 刘遂, 关志东, 郭霞, 等.平面编织混杂铺层层板穿透挖补修理参数分析[J]. 北京航空航天大学学报, 2013, 39(2):248-253.
[22] 徐建新,曹小梅, 李顶河. 复合材料加筋板的阶梯式挖补修理稳定性分析[J]. 中国民航大学学报, 2011, 29(4):1-4.
[23] 朱书华, 王跃全, 童明波. 复合材料层合板阶梯形挖补胶接修理渐进损伤分析[J]. 复合材料学报, 2012, 29(6):164-169.
[24] 徐绯,刘斌,李文英, 等. 复合材料修理技术研究进展[J]. 玻璃钢/复合材料, 2014,8:105-112.
[25] Kanoute P, Boso D P, Chaboche J L, et al. Multi-scale methods for composited: A review[J]. Archives of Computational Methods in Engineering, 2009, 16(1):31-75.
[26] Dubey A, Yadava V. Laser beam machining: A review[J]. International Journal of Machine Tools & Manufacture, 2008, 48 (6):609-628.
[27] 曹增强, 于晓江, 蒋红宇, 等. 复合材料的切割[J]. 航空制造技术, 2011, 15:32-35.
[28] Whittingham B, Baker A, Harman A, et al. Micrographic studies on adhesively bonded scarf repairs to thick composite aircraft structure[J]. Composites Part Applied Science and Manufacturing, 2009, 40(9):1419-1432.
[29] Baldan A. Adhesively-bonded joints and repairs in metallic alloys, polymers and composite materials: adhesives, adhesion theories and surface pretreatment[J]. Journal of Materials Science, 2004, 39(1):1-49.
[30] Baldan A. Adhesion phenomena in bonded joints[J]. International Journal of Adhesion and Adhesives, 2012, 38(10):95-116.
[31] Kim J, Kim H, Lee D. Investigation of optimal surface treatments for carbon/epoxy composite adhesive joints[J]. The Journal of Adhesion Science and Technology, 2003, 17(3):329-352.
[32] Rider A , Wang C, Cao J. Internal resistance heating for homogeneous curing of adhesively bonded repairs[J]. International Journal of Adhesion and Adhesives, 2011, 31(3): 168 -176.