SIMULATING IDEAL WIDTH OF THE TRAILING EDGE ADHESIVE GLUE OF WIND TURBINE BLADES

COMPOSITES SCIENCE AND ENGINEERING ›› 2015, Vol. 0 ›› Issue (4): 11-15.

• BASIC STUDY • Previous Articles Next Articles

SIMULATING IDEAL WIDTH OF THE TRAILING EDGE ADHESIVE GLUE OF WIND TURBINE BLADES

XUE Cai-hong, Li Cheng-liang, ZHU Xiao-qin

Sinomatech Wind Power Blade Co., Ltd., Beijing 100192, China

Received:2014-10-20 Online:2015-04-28 Published:2021-09-14

Abstract

CLC Number:

TB332
TK83

XUE Cai-hong, Li Cheng-liang, ZHU Xiao-qin. SIMULATING IDEAL WIDTH OF THE TRAILING EDGE ADHESIVE GLUE OF WIND TURBINE BLADES[J]. COMPOSITES SCIENCE AND ENGINEERING, 2015, 0(4): 11-15.

[1]	JIN Xiangxiang, MA Yuanzhuo, ZHAO Zhenzhou, XU Bofeng, LI Hongshuang. Parametric design and optimization of composite wind turbine blade [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 39-44.
[2]	XIE Lilai, HU Congliang, DONG Min, YANG Xiaohui, LIU Penghui. Fatigue life calculation method of wind turbine blade based on piecewise linear mean stresses correction [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 62-69.
[3]	WEI Lijiang, QIU Ruilei, WANG Ganwu, XIE Bowu, LI Mingzhi, FENG Wei. Advances in pultruded composites for large wind turbine blades [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(7): 116-121.
[4]	XU Qiang, ZHANG Xiyue, HUANG Huixiu, WANG Zhiwei, LIU Chuanrui. Application status and development trend of pultruded plates for wind turbine blades [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(6): 123-128.
[5]	YANG Dexu, LAN Haijin, YIN Xiuyun. Analysis of rain erosion testing technology for wind turbine blades [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(5): 121-128.
[6]	XU Jun, CUI Xiaopeng, WANG Xiangdong, LI Chengliang, HUANG Huixiu. Research of the influence of milled carbon fiber pollution on lightning protection of wind turbine blades [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(12): 75-79.
[7]	XING Hairui. Design and verification of repair process for wind turbine blade with penetrating damage [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(12): 96-105.
[8]	WANG Quan, XIA Wei, YANG Jianzhong, XU Tangjie, WANG Fengyun. Study on hierarchical optimized design of structural topology and layer for the wind turbine blade [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(11): 69-75.
[9]	MAO Yasai, MAO Yimei, PENG Bingbing, MU Jiaquan. Application research of laser treatment in the wind turbine blade pultruded planks [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(11): 114-119.
[10]	ZHANG Yanan, CHEN Dong, SHI Jianwei, TIE Ying, LI Cheng. Simulation analysis of interface peel strength of CFRP laminate single lap adhesive joint [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(1): 74-82.
[11]	ZHANG Rui, WEN Chuanbo. WTB-Net: A lightweight wind turbine blade surface defect recognition algorithm based on ShuffleNet V2 [J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(8): 66-71.
[12]	LI Haiyin, ZHENG Guoyan, WANG Lele, QI Jiaqi, ZHENG Yanping. Study on tensile properties of composite glue-screw hybrid connection structure with preload [J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(7): 72-78.
[13]	LIU Jingyu, YUAN Wei, SONG Houli, MEI Tongrui. Study on quality defects of wind turbine blades caused by thick light wood core [J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(5): 80-85.
[14]	ZHANG Jinguang, LI Yiwen, WEN Xianglong, OUYANG Yujia, MENG You. Development and experimental research on CFRP bonded joints plug-in [J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(2): 5-13.
[15]	XIAO Xiao, YUE Tao, ZHANG Tieshan. Effect of material type on mechanical properties of bonded joint based on cohesive model [J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(12): 28-37.

SIMULATING IDEAL WIDTH OF THE TRAILING EDGE ADHESIVE GLUE OF WIND TURBINE BLADES

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments