DESIGN OF COMPOSITE COMPONENT MOLD FOR U-SHAPE GIRDER

Abstract

Abstract: The three-dimensional software CATIA was used to design the composite component mold of autoclave forming and optimize the mold structure for the composite component U-shape girder. During the digital design process, the influential factors about thermal expansion coefficient, the molding structure, spring-back angle compensation, the composite structure demolding are considered. The mold of frame convex structure is made of Q235 ordinary carbon steel by welding, modifying the mold surface in order to eliminate or decrease the deformation and adding the spring-back angle (about 1degree) to guarantee the mold surface dimensional accuracy. The mold has reasonable structure, higher processing quality, lower cost, good sufficient stiffness and strength, and gas permeability. And, the tolerance of surface dimension can meet the manufacturing request. The composite component U-shape girder is manufactured by using the designed mold. The results show that the tolerance of surface dimension and the controlling of angle deformation meet the technical condition and assembly request.

Key words: composite component mold, U-shape girder, autoclave forming, thermal expansion coefficient, spring-back angle

CLC Number:

TB332

HAN Pei-pei, MENG Qing-jie. DESIGN OF COMPOSITE COMPONENT MOLD FOR U-SHAPE GIRDER[J]. COMPOSITES SCIENCE AND ENGINEERING, 2015, 0(3): 73-77.

References

[1] 李桂东. 复合材料构件热压罐成型工装设计关键技术研究[D]. 南京:南京航空航天大学,2010.
[2] 李桂东, 周来水. 复合材料构件成型模具设计方法[J]. 南京航空航天大学学报,2009,41(6):777-782.
[3] 陈晓静. 复合材料构件固化成型的变形预测与补偿[D]. 南京:南京航空航天大学,2011.
[4] 中国航空研究院编著. 复合材料结构设计手册[M]. 北京:航空工业出版社,2001.
[5] 何颖, 蔡闻峰, 等. 热压罐成型中温固化复合材料模具[J]. 纤维复合材料,2006,(1):58-59.
[6] 黄钢华, 张冬梅, 等. Invar钢模具制造工艺研究[J]. 航空工程进展,2011,2(4):485-488.
[7] 岳广全, 张博明, 等. 模具对热固性树脂基复合材料固化变形的影响[J]. 玻璃钢/复合材料,2010,(5):62-65.
[8] Andrew A. Johnston. An Integrated Model of the Development of Process-Induced Deformation in Autoclave Processing of Composite Structure[D]. Canada: The University of British Columbia, 1997.
[9] 绍坤, 陈文亮, 等. 复合材料固化过程中工装温度场的有限元分析[J]. 中国制造业自动化,2009,38(7):27-34.
[10] 《航空制造工程手册》总编委会主编. 航空制造工程手册[M]. 航空工业出版社,1993.
[11] 魏冉, 贾丽杰, 等. 热固性复合材料结构固化回弹变形研究进展[J]. 航空制造技术,2013,(23/24):104-110.
[12] 晏冬秀, 刘卫平, 等. 复合材料热压罐成型模具设计研究[J]. 航空制造技术,2012,(7):49-52.
[13] GFG Inc. Technical proposal for co-bonding mould chain tools[Z]. Italy: 2011.
[14] 贾丽杰, 魏冉, 等. 复合材料C形结构的回弹变形研究[J]. 航空制造技术,2013,(23/24):121-130.
[15] 安鲁陵. 飞机复合材料构件工装的数字化设计[J]. 航空制造技术,2010,(6):74-77.
[16] 张富官. 复合材料构件成型模具的参数化设计[J]. 宇航材料工艺,2008,(6):10-14.
[17] 陈功. 复合材料构件数字化制造若干支撑技术研究[D]. 南京:南京航空航天大学, 2007.