VIMP RESEARCH ON THE ROOT OF THE LARGE SIZE OFFSHORE WIND TURBINE BLADE

Abstract

Abstract: For the past few years, vacuum infusion molding process is widely used in offshore blade which is thicker and large-size. Aiming at resolving the infusion problems which applying on 6MW-offshore blade, we design the flow medium placement process, set the process parameters, optimize the previous infusion process. Finally, the effect of resin infiltration was improved and the resin content was controlled.

Key words: offshore wind turbine blade, VIMP, epoxy resin, composite material

CLC Number:

TB332

ZHAO Li-yan,SUN Yu-quan, YAN Chen, LI Hui. VIMP RESEARCH ON THE ROOT OF THE LARGE SIZE OFFSHORE WIND TURBINE BLADE[J]. COMPOSITES SCIENCE AND ENGINEERING, 2015, 0(12): 82-86.

References

[1] 刘强, 杨科, 徐建中. 6MW海上风电机组叶片设计. 风能, 2011, 04.
[2] 赵渠森,赵攀峰. 真空辅助成型工艺研究. 纤维复合材料, 2002, (1): 42-46.
[3] Correia N C, Robitaille F, Long A C, et al. Analysis of the vacuum infusion moulding process: I. Analytical formulation. Composites: PartA, 2005, 1645-1656.
[4] Modi D, Correia N, Johnson M, et al. Active control of the vacuum infusion process. Composites Part A, 2007, 38(5): 1271-1287.
[5] 杨金水. 真空导入模塑工艺树脂流动行为研究. 长沙: 国防科学技术大学, 2007.
[6] 陈宗来, 陈余岳. 大型风力机复合材料叶片技术进展. 玻璃钢/复合材料, 2005, 3: 53-56.
[7] 常燕, 王兆增, 催元胜, 等. 风电叶片复合材料的研究进展及其应用. 工程塑料应用, 2014, 4: 135-139.
[8] 李倩, 符强, 陆培, 等. 风力发电叶片选材分析. 河北化工, 2013, 2:65-66.
[9] 王海珍, 颜晨, 王兴波, 等. CF/GF混杂复合材料性能分析及其在风电叶片上的应用. 玻璃钢/复合材料, 2014, 11: 67-71.
[10] George Marsh. Composites help improve wind turbine breed. Reinforcement Plastics, 2006, (3):26-31.
[11] 李军向, 薛忠民, 王继辉, 等. 大型风轮叶片设计技术的现状与发展趋势. 玻璃钢/复合材料, 2008, 1:48-52.
[12] 王斌, 金志浩, 丘哲明, 等. 树脂含量对芳纶纤维/环氧复合材料性能的影响. 固体火箭技术, 2002, 25(1): 61-64.
[13] 方心灵, 吴中伟, 高虹, 等. 树脂含量对芳纶防弹复合材料性能的影响. 宇航材料工艺, 2012, 5: 42-44.
[14] Drapier S, Gardin C, Grandidier J C, et al. Structure effect and microbuckling. Composites Science and Technology, 1996, 56(7): 861-867.
[15] Whitney J M, Daniel I M, Pipes R B. Experimental Mechanics of Fiber Reinforced Composite Materials. Prentice-hall, 1982.