PROGRESS IN NUMERICAL SIMULATION OF MOLD FILLING IN RTM

Abstract

CLC Number:

TB332

QI Wen,LIU Dong,ZHAO Jun-li,XU Zi-hang. PROGRESS IN NUMERICAL SIMULATION OF MOLD FILLING IN RTM[J]. COMPOSITES SCIENCE AND ENGINEERING, 2015, 0(12): 105-109.

[1] 蔡晶, 祝颖丹, 秦永利, 等. LCM工艺中天然纤维渗透率的研究进展. 玻璃钢/复合材料,2014,(4):85-90.
[2] Ishikawa H, Takagi H, Nakagaito A N, et al. Effect of surface treatments on the mechanical properties of natural fiber textile composites made by VaRTM method. Composite Interfaces,2014,21( 4) : 329-336.
[3] 杨俊英. 树脂传递模塑工艺过程的数值模拟. 山东大学,2007.
[4] 陈晓江. RTM工艺渗透率的研究. 武汉理工大学,2010.
[5] 严文燕. 含有沉浸项的双尺度多孔介质LCM的数值模拟. 武汉理工大学,2012.
[6] 杨波, 金天国, 郑龙. 微-细双尺度单胞下织物预成型体渗透率预测. 复合材料学报,2013,05:209-217.
[7] Hua Tan,Krishna M. Pillai.Multiscale modeling of unsaturated flow in dual-scale fiber preforms of liquid composite molding I: Isothermal flows. Composites Part A, 2010, (1).
[8] 张裕华. 双尺度LCM工艺的树脂流动的数值模拟. 武汉理工大学,2013.
[9] 陈晓江, 徐文彬, 晏石林, 等. 恒压下树脂在双尺度多孔介质中的流动特性. 复合材料学报, 2012,29(4):63-68.
[10] Tan H. Simulation of flow in dual-scale porous media. Milwaukee:The University of Wisconsin-Milwaukee,2010.
[11] Hua Tan, Krishna M. Pillai. Multiscale modeling of unsaturated flow in dual-scale fiber preforms of liquid composite molding III: reactive flows. Composites Part A,2012,(43)1: 29-44.
[12] Cai Z. Simplified mold filling simulation in resin transfer molding. Composite Materials,1992,26(2):606-630.
[13] Chui W K, Glim J, Tangerman F M, et al. Process modeling in resin transfer molding as a method to enhance product quality. SIAM Rev,1997,39: 714-727.
[14] Fracchia CA, Castro J, Tucher Ⅲ CL. A finite element/control volume simulation of resin transfers molding. In: Proceedings of the American society for composites, fourth technical conference[Z]. Lancaster( PA) : Technomic,1989.
[15] 董抒华. 纤维预制件渗透率的预测及其浸润过程有限元模拟. 山东大学,2014.
[16] 黄玉霞. RTM工艺微观流动行为的数值模拟研究. 湘潭大学,2011.
[17] 施飞,董湘怀. 非等温RTM工艺的数值模拟. 复合材料学报, 2009,26(4):146-150.
[18] 叶鑫. 基于沉浸模型的RTM工艺数值模拟. 武汉理工大学,2013.
[19] 江顺亮. RTM充模分析的隐式控制体积法及其迭代方法. 南昌大学学报,2006,30(2):187-191.
[20] 张鸣翠. 多尺度隐式有限元法在LCM工艺数值模拟中的应用. 武汉理工大学,2010.
[21] 谭华,晏石林,王继辉. RTM充模过程数值模拟的隐式有限元算法. 固体力学学报,2004,25(3):349-354.
[22] Shipeng Li,Raymond Gauvin. Numerical analysis of the resin flow in resin transfer molding. Journal of Reinforced Plastics and Composites,1991,10: 314-327.
[23] 李海晨,王彪,林新. 用贴体坐标法模拟RTM工艺树脂流动过程. 哈尔滨工业大学学报,2003,35(1):58-61.
[24] Byoug Yoon Kim,GI Joon Nam,Jae Wook Lee. Optimiza-tion of filling process in RTM using a genetic algorithm and exper-imental design method. Polymer Composites,2002,23(1): 73-86.
[25] 路明坤,刘扬,张博明. ANSYS二次开发在RTM工艺注模过程数值模拟中的应用. 纤维复合材料,2005, (2):31-35.
[26] 刘诚, 徐振锋, 花军,等. 薄板件真空模压成型过程的仿真研究. 安徽农业科学,2014,35:12558-12560.
[27] 尹明仁, 段跃新, 李丹. 视窗化RTM工艺充模过程模拟仿真技术研究 .复合材料学报,2001,18(4):17-22.
[28] Hua Tan,Pillai, K.M. Fast LCM Simulation of unsaturated flow in dual-scale fiber mats using the imbibition characteristics of a fabric-based unit cell. Polymer Composites,2010,31(10): 1790-1807.
[29] 郑澎, 张彦飞, 赵贵哲, 等. 真空辅助RTM工艺中孔隙的形成机理及实时控制研究. 工程塑料应用,2010,38(10):44-47.
[30] 杨杰, 席平. 树脂传递模塑制品的缺陷控制及流程优化. 航空制造技术,2015,06:77-79.
[31] 李伟东, 刘刚, 安学锋, 等. z向流动RTM工艺树脂的流动浸润行为. 复合材料学报,2013,06:82-89.

PROGRESS IN NUMERICAL SIMULATION OF MOLD FILLING IN RTM

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	LI Jiamin, TAN Lina, JIANG Hanwei, FAN Ruyi, RAN Qichao. Study on properties of epoxy modified benzoxazine resin for RTM technology [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 11-16.
[2]	ZHANG Chuandian, CHEN Tao, DUAN Zhenyan, LIU Fengyu. Simulation of thermochemical ablation of modified C/SiC-ZrC composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(6): 22-28.
[3]	ZHANG Hongqiang, CHEN Dong, LI Cheng. Design and mechanical property analysis of double-side patch repair for CFRP laminates [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(2): 52-58.
[4]	YANG Jigang, ZHANG Fangfang, LIANG Yingshuo, ZHANG Zhaoyang, WANG Qingzhou. Analysis of the influence of force characteristics of buried sand trap arch structure [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(2): 59-66.
[5]	ZHAO Yueqing, LIN Dezhi, CHEN Ping, TANG Jiali. Comparison and numerical simulation of single/double diaphragm forming of thermosetting carbon fiber prepreg [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(2): 109-118.
[6]	SUN Ruijun, LIANG Sen, LUO Hao, LIU Zhaoyang, HU Zijian. In-plane mechanical properties of embedded co-cured perforated fiber reinforced damping composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(1): 22-29.
[7]	ZHANG Yanan, CHEN Dong, SHI Jianwei, TIE Ying, LI Cheng. Simulation analysis of interface peel strength of CFRP laminate single lap adhesive joint [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(1): 74-82.
[8]	HUANG Lixin, ZHANG Yuanxiu, HUANG Jun. Effects of interfacial van der Waals interaction on the elastic properties of graphene/polyethylene composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(7): 26-34.
[9]	LIU Juntian, CHEN Jiping, QIU Chunliang, SU Jiazhi. Design and verification of RTM process for Z-shaped frame of composite fuselage [J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(7): 91-97.
[10]	SHEN Haochen, NIU Bo, ZHANG Qikai, HAO Jingying, ZHANG Yayun, LONG Donghui. Mechanical and thermal properties of 2.5D quartz fiber reinforced nano-porous resin-based composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(4): 5-13.
[11]	WU Bitao, LIN Zucai, ZHANG Jian, OUYANG Yao, YANG Junfeng. Analysis of longitudinal force interaction of multi-span continuous girder bridge strengthened by prestressed CFRP plates [J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(4): 56-62.
[12]	QIU Gang, ZHU Fuxian, ZHU Xingmin, XU Xianyi. Stress analysis on the hole edge of carbon/glass hybrid composite single bolted joint [J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(3): 18-26.
[13]	ZHANG Huanshi, ZHANG Fa, GAO Limin, JIA Yinlei. Damage characteristics analysis of composite laminates with filled nail holes under tensile load [J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(3): 89-94.
[14]	XIAO Xiao, YUE Tao, ZHANG Tieshan. Effect of material type on mechanical properties of bonded joint based on cohesive model [J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(12): 28-37.
[15]	YU Feng, MAIMAITI Nuermaimaiti, FANG Yuan, ZHANG Nannan. Numerical study on hysteresis behavior of PVC-CFRP confined concrete column-RC ring beam interior joint [J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(12): 63-71.