BLADE LOADS CALCULATION FOR MW WIND TURBINE

Abstract

Abstract: It′s very important to estimate and analyze components′ loads of wind turbine, because it runs in hostile environment. This review maily introduces load sources and load sorts for rotor blade and load calculation method. Then, a 6MW carbon blade was taken as an example to calculate the extreme and fatigue loads using the GH bladed software.

Key words: wind turbine, rotor blade, calculate, load, GH bladed

CLC Number:

TB332

ZHUANG Heng-dong, HUANG Hui-xiu, XU Yang. BLADE LOADS CALCULATION FOR MW WIND TURBINE[J]. COMPOSITES SCIENCE AND ENGINEERING, 2014, 0(5): 37-40.

References

[1] 王欣,薛亚鹏等. 大型风机叶片新材料和新技术的发展[J].玻璃钢/复合材料,2011,(3):55-59.
[2] 周红丽,王红. 风机发电复合材料叶片的研究进展[J].材料导报,2012,26(3):65-67.
[3] Park SH, Han KS. Design of wind turbine blades using finite element model[J].POSTECH, 2010.
[4] Shokrieh MM, Rafiee R. Simulation of fatigue failure in a full composite wind turbine blade[J]. Compos. Struct., 2006,74:332-342.
[5] 赵峰, 段巍. 基于叶素-动量理论及有限元方法的风机叶片载荷分析和强度计算[J].机械设计与制造,2010,(8):42-44.
[6] Dai J C, Hu Y P,et.al. Aerodynamic loads calculation and analysis for large scale wind turbine based on combining BEM modified theory with dynamic stall model[J]. Renewable energy, 2011,36(3).
[7] YU J R, Bang J,et.al. Fatigue life investigation of composite rotor blades on the wind turbine in complex terrain[J]. Advanced Composite Materials,2012,5(21).
[8] 托尼 B,大卫 S. 风能技术[M]. 武鑫,译. 北京:科学出版社,2007. 184-244.
[9] 邓新丽,孙文磊. 大型风力机叶片在三维湍流下的载荷分析与计算[J].机床与液压,2013,41(1):28-31.
[10] 赵丹平. 风力发电机组叶片模型的气动载荷研究[D]. 内蒙古:内蒙古农业大学,2009. 24-26.
[11] 周鹏展,曾竟成等. 基于Bladed软件的大型风力机叶片气动分析[J].中南大学学报,2010,(10):2022-2027.
[12] 许明,田德等. 风力发电机组的载荷计算方法概述[J].农村牧区机械化,2009,(2):6-9.
[13] 廖明夫等. 风力发电技术[M]. 西安:西北工业大学出版社,2009. 121-123.
[14] 贺德馨等. 风工程与工业空气动力学[M].北京:国防工业出版社,2006.
[15] 齐沛玉. 大型风力机复合材料叶片的气动外形和载荷设计[R].玻璃钢,2009. 7-9.
[16] 刘博,黄争鸣. 复合材料风机叶片结构分析与铺层优化[J].玻璃钢/复合材料,2012,(1):3-7.
[17] 萨昊亮,李成良等. 风电叶片疲劳试验振动分析与研究[J].玻璃钢/复合材料,2013, (2):57-59.