RESEARCH PROGRESS OF COMPOSITE LEAF SPRING

Abstract

CLC Number:

TB332

YANG De-xu, ZHU Hai-feng, ZHANG Lin-wen. RESEARCH PROGRESS OF COMPOSITE LEAF SPRING[J]. COMPOSITES SCIENCE AND ENGINEERING, 2014, 0(10): 84-89.

[1] C subramanian,S senthilvelan. Fatigue performance of discontinuous fibre-reinforced thermoplastic leaf spring[J]. Proc.IMechE part L:J.Materials:design and applications, 224:93-100.
[2] C subramanian,S senthilvelan.Joint performance of the glass fiber reinforced polypropylene leaf spring[J].composite structures,2011,93:759-766.
[3] I Rajendran and S Vijayarangan. Design,Analysis,Fabrication and Testing of a Composite Leaf Spring[J].IE(I)Journal-MC,2002,82(3):180-187.
[4] D.sameer kumar,S.radhika,K.Ravindra,K.N.S.Suman.Improved Design Optimization of a Composite Leaf Spring using Swarm Intelligence [J].International Journal of Applied Engineering Research,2011,(6):193-200.
[5] Hou J P,Cherruault J Y, Nairne I,et al. Evolution of the eye-end design of a composite leaf spring for heavy axle loads[J].Composite structures,2007,78(3):351-358.
[6] Chiu C, Hwan C, Tsai H, et al .An experimental investigation into the mechanical behaviors of helical composite springs[J]. Composite structures,2007,77(3):331-340.
[7] Subramanian C, Senthilvelan S. Joint performance of the glass fiber reinforced polypropylene leaf spring[J]. Composite structures,2011,93(2):759-766.
[8] Fuentes J J,Aguilar H J ,Rodriguez J A, et al. Premature fracture in automobile leaf springs[J].Engineering Failure analysis,2009,16(2):648-655.
[9] Subramanian C, Senthilvelan S. Effect of reinforced fiber length on the joint performance of thermoplastic leaf spring[J].Materials and Design.2010,31(8):3733-3741.
[10] 李磊,任勇生,孙爱芹,胡爱英,尹文明,王晓辉.SMA纤维复合材料板簧刚度性能分析[J].机械设计与研究,2008,24(3):57-61.
[11] C·奥利克,R·福斯特,H·肯佩.分段式纤维复合板簧及其生产方法[P].中国:200680042271.7,2006-11-4.
[12] 董国华,袁国青.复合材料汽车板簧吊耳及其联接的研究[J].玻璃钢/复合材料,2001,(2):34-36.
[13] 赵洪斌,陈宏章,刘忠珊.纤维复合材料单片板簧的研制[J].2000,(3):29-31.
[14] 陶建新.复合材料板簧的设计研究[D].上海:同济大学,1987.
[15] 袁皎秋.复合材料板簧的选材和固化工艺研究[D].上海:同济大学,1989.
[16] 李未.复合材料板簧的优化设计和有限元分析[D].哈尔滨:哈尔滨工业大学,2006.
[17] 杨俊杰.树脂基复合材料板簧结构阻尼性能研究[D]. 哈尔滨:哈尔滨工程大学,2010.
[18] 江梅,李尹熙.纤维复合材料板簧的研究[J].汽车工艺与材料,1992,(9):25-29.
[19] 张小燕,席长飞,王大鹏,王庆明.汽车材料板簧的制备方法及性能测试[J].玻璃钢/复合材料增刊,2012,250-252.
[20] 吴辉,李再轲,姜其斌.复合材料板式弹簧的研制及性能[J].塑料工业,2012,40(8):103-106.
[21] Deshmukh B B,Jaju S B. Design and Analysis of Glass Fiber Reinforced Polymer(GFRP) Leaf Spring[J].Computer Methods in Applied Methods in Applied Mechanics and Engineering,2010,195(50):69-75.
[22] 徐献忠,侯松发.玻璃钢复合材料板弹簧的制造方法[P].中国:200610017556.7,2006-3-24.
[23] 席长飞,王庆明,高国强,王大鹏,张小燕.一种玻璃纤维增强树脂复合材料板簧的制备方法[P].中国:201210156535.9,2012-5-18.
[24] 李雷.汽车复合材料板簧研究[D].武汉:武汉理工大学,2013.
[25] 王庆明,席长飞,高国强,王大鹏,张小燕. 一种玻璃纤维增强树脂复合材料板簧的制造装置[P].中国:201210156355.0,2012-5-18.
[26] 席长飞,王大鹏,张小燕,王庆明.复合材料板簧制造装备研究[J].玻璃钢/复合材料增刊,2012,259-260.
[27] 梁继才,李义.汽车复合材料板簧制造装置与方法[P].中国:200510119048.5,2005-12-6.
[28] 吴明珠,李建林,邹波,李再轲,沈明,吴辉.板弹簧生产设备[P].中国:201220421726.9,2012-08-23.
[29] 边文凤,李未.复合材料板簧副簧的优化设计[J].机械设计与制造,2006,(9):29-31.
[30] 王甲世,李再轲,吴辉,王春花,姜其斌.汽车复合材料板弹簧的有限元分析及性能测试[J].汽车技术,2012,(4):55-57.
[31] 许长生,高诚辉,彭育辉,林风功.复合材料板簧的优化设计及分析[J].农业装备与车辆工程,2007,(12):22-27.
[32] ZhengYinhuan,XueKa,HuangZhigao.Finite Element Analysis of Composite Leaf Spring[C].The 6th International Conference on Computer Science & Education,2011. 316-319.
[33] Rajendran I.Optimal design of a composite leaf spring using genetic algorithms[J].computers and structures,2001,79(11):1121-1129.
[34] 李宇菲.复合材料汽车板簧的优化设计及其有限元分析[D].武汉:武汉理工大学,2012.
[35] 王莉,郭立群,吴晓涛,江梅,宋恩章.重型牵引车复合材料板簧的设计及应用[J].汽车工艺与材料,2013,(10):1-7.
[36] 王大鹏,席长飞,张小燕,王庆明.重型卡车复合材料板弹簧的结构设计与分析[J]. 玻璃钢/复合材料增刊,2012,253-255.
[37] M.Senthil Kunmar, S Vijagarangan.Static analysis and fatigue life predication of steel and composite leaf spring for light passenger vehicles[J].Journal of Scientific & Industrial Research.2007,66(2):128-134.
[38] 牟正明,朱学华,沈德民.GFRP复合材料板簧的设计及应用[J].机械工业标准化与质量增刊,2012,104-106.
[39] 王甲世,李再轲,姜其斌.一种汽车复合材料板弹簧总成及其组装方法[P].中国:201210183238.3,2012-06-06.
[40] 李再轲,吴辉,曾竟成,潘艺,姜其斌,王甲世,王春花.一种纤维复合材料板式弹簧及其制造工艺[P].中国:201210057531.5,2012-03-06.
[41] 吴辉,李再轲,曾竟成,姜其斌,王甲世,王春花.一种纤维增强塑料板式弹簧的制造方法[P].中国:201210322997.3,2012-09-04.

RESEARCH PROGRESS OF COMPOSITE LEAF SPRING

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	ZHANG Qian, ZHANG Yifan, ZOU Qi, ZHANG Peng, JIAO Yanan, AN Liuxu, LIU Yanfeng, ZHANG Daijun, HAO Junjie, CHEN Li. Connection performance and failure mechanisms of three-dimensional woven composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 5-11.
[2]	YAN Jiqiang, XIE Zongyou, LI Jun, ZOU Qi, LEI Shuai, CAO Tienan, ZHANG Daijun. Effect of ply angle on anti-high speed impact properties of polyimide fiber reinforced composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 12-18.
[3]	LÜ Xujin, HUO Hongyu, PENG Gongqiu, ZHANG Baoyan, YE Jinqiu, LIU Yong. Electrospun PPESK fiber mats interlayer toughened carbon fiber/epoxy resin composite [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 19-27.
[4]	GUO Miaocai. The interlayer structures and lightning strike damage behaviors of the conductive particles modified highly tough composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 28-36.
[5]	LI Moying, ZHENG Linfeng, LIU Gang, LI Mengjiao, YAO Jianan. Adhesion study of carbon fiber/polyaryletherketone thermoplastic composites with epoxy coatings [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 37-42.
[6]	HUANG Daming, TANG Lixin, SUN Juntao, WANG Wei. Research on the effect of residual monomer acrylonitrile on the preparation of PAN-based carbon fiber [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 48-51.
[7]	FENG Zhenhui, WANG Zhe, ZENG Jie, CHEN Binbin, FENG Chunle, ZHOU Fan. A method for optical fiber impact localization and load history reconstruction of composite laminates [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 52-56.
[8]	ZHANG Dewei, WEI Wei, ZHANG Pin, WANG Qi, ZHAO Cong, AN Luling. Shape control of aircraft composite components based on measured data [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 57-66.
[9]	YAN Chao, RONG Xiaoyuan, ZHAO Yueqing, QIAN Zhongjian. Curing deformation study of composite cobonding omega stringer stiffened panel [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 67-72.
[10]	YAN Lei, ZHAO Fei, HUAN Dajun, ZHANG Shengyuan, WANG Bin, XIAO Jun. Research on tension-tensile fatigue behavior and life prediction of T700/PPS filament winding thermoplastic composites with NOL rings [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 73-81.
[11]	CHENG Libing, XU Weiwei, LI Bo, WEN Shiqi. Research on microwave curing process for rib composite parts [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 82-86.
[12]	WU Haisheng, LUO Jintao, GU Yizhuo, SUN Tianfeng, LIU Jia, YAO Qi, LI Yu. Study on structural stability of high-modulus carbon fiber composite tube in alternating high and low temperature environment [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 87-91.
[13]	FU Chengjian, LIN Song, GUO Shufen. Prediction and analysis of burst pressure of type Ⅳ composite cylinder based on progressive damage [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 92-97.
[14]	XU Lin, LIU Chuanjun, ZHAO Chongshu. Application and development trends of composite materials in civil aircraft [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 98-104.
[15]	SONG Jianhui, YU Xiaochen, ZHU Yingdan, WU Huaping, ZHANG Xiongjun, CHEN Gang. Advances in fatigue performance of fiber reinforced composite-metal hybrid joints [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 105-112.