STUDY ON THE PERFORMANCE OF GLASS FABRIC/MEDIUM TEMPERATURE CURING RESIN COMPOSITES

Abstract

Abstract: 3233B/EW250B prepreg is a type of glass fabric/medium temperature curing resin prepreg which was prepared using hot-melt method in this paper. Then the prepreg was made into composites and its performance was tested. The results show that the processing properties, flame retardancy, dielectric properties and mechanical performance are well-behaved. 3233B resin has good toughness, the roller peeling strength of the sandwich structure is high and the prepreg can curing with the sandwich directly.

Key words: epoxy resin, glass fabric, composites, performance

CLC Number:

TB332

WUYUN Qi-qige, HU Ren-wei. STUDY ON THE PERFORMANCE OF GLASS FABRIC/MEDIUM TEMPERATURE CURING RESIN COMPOSITES[J]. COMPOSITES SCIENCE AND ENGINEERING, 2013, 0(8): 35-38.

[1]	ZHANG Qian, ZHANG Yifan, ZOU Qi, ZHANG Peng, JIAO Yanan, AN Liuxu, LIU Yanfeng, ZHANG Daijun, HAO Junjie, CHEN Li. Connection performance and failure mechanisms of three-dimensional woven composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 5-11.
[2]	YAN Jiqiang, XIE Zongyou, LI Jun, ZOU Qi, LEI Shuai, CAO Tienan, ZHANG Daijun. Effect of ply angle on anti-high speed impact properties of polyimide fiber reinforced composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 12-18.
[3]	GUO Miaocai. The interlayer structures and lightning strike damage behaviors of the conductive particles modified highly tough composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 28-36.
[4]	LI Moying, ZHENG Linfeng, LIU Gang, LI Mengjiao, YAO Jianan. Adhesion study of carbon fiber/polyaryletherketone thermoplastic composites with epoxy coatings [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 37-42.
[5]	XIE Wenbo. Study on properties of high heat resistant and flame retardant epoxy resin matrix CFRP [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 43-47.
[6]	HUANG Daming, TANG Lixin, SUN Juntao, WANG Wei. Research on the effect of residual monomer acrylonitrile on the preparation of PAN-based carbon fiber [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 48-51.
[7]	YAN Lei, ZHAO Fei, HUAN Dajun, ZHANG Shengyuan, WANG Bin, XIAO Jun. Research on tension-tensile fatigue behavior and life prediction of T700/PPS filament winding thermoplastic composites with NOL rings [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 73-81.
[8]	SONG Jianhui, YU Xiaochen, ZHU Yingdan, WU Huaping, ZHANG Xiongjun, CHEN Gang. Advances in fatigue performance of fiber reinforced composite-metal hybrid joints [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 105-112.
[9]	HU Zehui, LI Yong, HUAN Dajun, HAN Bing, GUO Da. Research status and development trend of Z-pin reinforced anti-heat insulation composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 125-132.
[10]	WANG Xiaoming, WANG Xiaobo, CHENG Yanan, ZHANG Chen, QUAN Zhenzhen, ZHANG Hui, LIU Yong, SUN Houli, YU Jianyong. Fabrication and impact performance analysis of carbon/Kevlar fiber hybrid 3D braided composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 5-10.
[11]	LI Jiamin, TAN Lina, JIANG Hanwei, FAN Ruyi, RAN Qichao. Study on properties of epoxy modified benzoxazine resin for RTM technology [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 11-16.
[12]	LING Xujie, CHEN Yinhong, LU Yizhou, FANG Yuan. Study on flame retardant properties and impact properties of flame retardant microcapsule modified glass fiber reinforced polymer composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 17-23.
[13]	MAO Jingqiao, HU Yiling, PANG You, YANG Yuqiu. Preparation and performance study of sizing treated carbon fiber/polypropylene composite molded by CF/PP fiber mat [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 32-38.
[14]	WANG Haoda, ZHU Fuxian, HU Kejun, XU Xianyi. Parametric finite element modeling method for fiber reinforced composite bolted structures [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 53-61.
[15]	XIE Lilai, HU Congliang, DONG Min, YANG Xiaohui, LIU Penghui. Fatigue life calculation method of wind turbine blade based on piecewise linear mean stresses correction [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 62-69.

STUDY ON THE PERFORMANCE OF GLASS FABRIC/MEDIUM TEMPERATURE CURING RESIN COMPOSITES

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments