THE FORMING METHOD OF HIGH PRESSURE GRP PIPE BASED ON THE PROPERTY OF RESIN VISCOSITY

COMPOSITES SCIENCE AND ENGINEERING ›› 2013, Vol. 0 ›› Issue (4): 3-5.

THE FORMING METHOD OF HIGH PRESSURE GRP PIPE BASED ON THE PROPERTY OF RESIN VISCOSITY

ZOU An-lan¹, GAO Liang-chao², GUO De-you³, CHEN Guang-lie⁴

1. Daqing Harvest Long Wall High Pressure FRP Pipe Co.,Ltd.,Daqing 163000,China;
2. The Experimentation Enterprise Department,The No. 703 Research Institute of China Shipbuilding Industry Corporation,Harbin 150078,China;
3. Shandong Golden Light Glass Fiber Reinforced Plastec Pipe Group Co.,Ltd.,Dezhou 253308,China;
4. Harbin Yidao Technology Co.,Ltd.,Harbin 150001,China

Received:2013-04-16 Online:2013-07-28 Published:2022-03-14

Abstract

Abstract: With outstanding performance,the high pressure GRP pipes are widely used in the petroleum storage and transportation. How to improve the pressure-proof capability of GRP pipe is a research hotspot at present. Based on the property of resin viscosity,the goal to improve the pressure-proof capability becomes the problem of temperature control during the process of pipe forming. The numerical simulation program of the composite curing process is developed by ANSYS based on APDL. The winding process of curing method by constant temperature heating is simulated,and the change law of the temperature on the outer surface is obtained through analysis. Finally,the heating course is optimized,which keeps the temperature of outer surface in desired range.

Key words: high pressure GRP pipe, curing method, numerical simulation, ANSYS, process optimization

CLC Number:

TB332

ZOU An-lan, GAO Liang-chao, GUO De-you, CHEN Guang-lie. THE FORMING METHOD OF HIGH PRESSURE GRP PIPE BASED ON THE PROPERTY OF RESIN VISCOSITY[J]. COMPOSITES SCIENCE AND ENGINEERING, 2013, 0(4): 3-5.

[1]	JIN Xiangxiang, MA Yuanzhuo, ZHAO Zhenzhou, XU Bofeng, LI Hongshuang. Parametric design and optimization of composite wind turbine blade [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 39-44.
[2]	ZHANG Chuandian, CHEN Tao, DUAN Zhenyan, LIU Fengyu. Simulation of thermochemical ablation of modified C/SiC-ZrC composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(6): 22-28.
[3]	YANG Jigang, ZHANG Fangfang, LIANG Yingshuo, ZHANG Zhaoyang, WANG Qingzhou. Analysis of the influence of force characteristics of buried sand trap arch structure [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(2): 59-66.
[4]	ZHAO Yueqing, LIN Dezhi, CHEN Ping, TANG Jiali. Comparison and numerical simulation of single/double diaphragm forming of thermosetting carbon fiber prepreg [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(2): 109-118.
[5]	SUN Ruijun, LIANG Sen, LUO Hao, LIU Zhaoyang, HU Zijian. In-plane mechanical properties of embedded co-cured perforated fiber reinforced damping composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(1): 22-29.
[6]	WU Bitao, LIN Zucai, ZHANG Jian, OUYANG Yao, YANG Junfeng. Analysis of longitudinal force interaction of multi-span continuous girder bridge strengthened by prestressed CFRP plates [J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(4): 56-62.
[7]	XIAO Xiao, YUE Tao, ZHANG Tieshan. Effect of material type on mechanical properties of bonded joint based on cohesive model [J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(12): 28-37.
[8]	YU Feng, MAIMAITI Nuermaimaiti, FANG Yuan, ZHANG Nannan. Numerical study on hysteresis behavior of PVC-CFRP confined concrete column-RC ring beam interior joint [J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(12): 63-71.
[9]	ZHANG Shaofeng, WEI Jinhui, TANG Xinchun, XU Jiajing, LIU Xinyu, YAO Lu. Numerical simulation of residual tensile strength of FMLs with low-velocity impact damage [J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(11): 28-36.
[10]	BAO Yidong, ZHANG Heng, ZHANG Huijie, HUAN Lei, YANG Zhiyong, ZUO Xiaobiao, AN Luling. Research on composite material forming mould compensation and component adaptive adjustment method [J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(11): 49-57.
[11]	REN Hongqing, DONG Jiuzhi, MEI Baolong, CHEN Yunjun, JIANG Xiuming. Analysis and study on multiple factors affecting compaction of 3D four-directional C/C composite preform [J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(11): 84-89.
[12]	XIONG Hua-kun, YUAN Guo-qing, YANG Jia-yong, QIU Xue-shi. Study on laser treatment of quartz fiber/cyanate ester resin composite bonding surfaces [J]. COMPOSITES SCIENCE AND ENGINEERING, 2022, 0(4): 81-86.
[13]	LI Zong-quan, ZHANG Sheng-lan, YANG Wen. Research status of impact test and simulation of honeycomb sandwich structures [J]. COMPOSITES SCIENCE AND ENGINEERING, 2022, 0(3): 121-128.
[14]	JING De-sheng, BAI Xiao-yu, WANG Hai-gang, ZHANG Ming-yi, LI Cui-cui, JIAO Yu-jin, YAN Jun, WANG Zhong-sheng. Research progress on creep property of glass fiber reinforced polymer anchors [J]. COMPOSITES SCIENCE AND ENGINEERING, 2022, 0(2): 119-128.
[15]	HUANG Hao-jie, LIANG Sen, ZHOU Yue-song. Study on penetration resistance of ceramic/UHMWPE composite target plates with different shapes [J]. COMPOSITES SCIENCE AND ENGINEERING, 2022, 0(11): 49-53.

THE FORMING METHOD OF HIGH PRESSURE GRP PIPE BASED ON THE PROPERTY OF RESIN VISCOSITY

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments