MECHANISM RESEARCH ON BASALT FIBER WITH PLASMA GRAFTED TREATMENT

Abstract

Abstract: The aim of this study was to explore the mechanism of basalt fiber after plasma grafted with maleic anhydride. Three different fibers were treated including basalt fiber,basalt fiber dealt with KH550 and basalt fiber dealt with KH570. The plasma graft of maleic anhydride on the surface of basalt fiber was generated and confirmed by FTIR,XPS. The morphology of the grafted fiber surface was observed with SEM. It is concluded that maleic anhydride was successfully grafted on three kinds of basalt fiber surface and COOR group was introduced on the fiber.O/C was increased after plasma grafted treatment and the largest increasement was on fiber that was treated with KH570,which was from 0. 74 to 1. 139.

Key words: basalt fiber, plasma graft, maleic anhydride

CLC Number:

TB332

LI Wei-na, SHEN Shi-jie, MA Chun-mei. MECHANISM RESEARCH ON BASALT FIBER WITH PLASMA GRAFTED TREATMENT[J]. COMPOSITES SCIENCE AND ENGINEERING, 2013, 0(3): 34-38.

References

[1] 张莉,申士杰,刘亚兰. 玄武岩纤维增强环氧树脂复合材料界面的FTIR 和XPS 表征[J]. 玻璃钢/复合材料, 2012,(1): 13-18.
[2] 孙宝磊. PBO 纤维等离子体改性及复合材料界面性能的研究[D]. 大连: 大连理工大学,2009.
[3] 周晓东,张翼,潘伟等. 粉末浸渍长玻璃纤维增强聚丙烯的注塑[J]. 中国塑料, 2001,10: 47-50.
[4] Varatharajan R,Malhotra S K,Vijayaraghavan I,et al. Mechanical and machining characteristics of GF/PP and GF/Polyester composites[J]. MaterSciEng B,2006,132: 134-137.
[5] 宋秋霞,刘华武,钟智丽,徐萍. 硅烷偶联剂处理对玄武岩单丝拉伸性能的影响[J]. 天津工业大学学报,2010,29(1): 20-22.
[6] 郑安呐,胡福增. 树脂基复合材料界面结合的研究Ⅰ: 界面分析及界面剪切强度的研究方法[J]. 玻璃钢/复合材料,2004,9(5): 12-15.
[7] 郑安呐,胡福增. 树脂基复合材料界面结合的研究Ⅱ: 界面优化及界面横晶的研究[J]. 玻璃钢/复合材料,2004,9(5): 16-19.
[8] 王恒武,王继辉,朱京杨,高国强. 纤维增强树脂基复合材料界面粘结强度测试方法探讨[J]. 玻璃钢/复合材料,2003,5(3 ):42-45.
[9] 刘亚兰. 玄武岩纤维增强树脂复合机理的研究[D]. 北京: 北京林业大学, 2011.
[10] 张莉. 玄武岩纤维表面处理对复合材料性能的影响[D]. 北京:北京林业大学, 2012.
[11] 李志军,程光旭,韦玮. 等离子体处理在玻璃纤维增强聚丙烯复合材料中的应用[J]. 中国塑料, 2000,14(6): 45-49.
[12] 刘亚兰,申士杰,李龙,邵灵敏. 偶联剂处理玻璃纤维表面的研究进展[J]. 绝缘材料,2010,43(4): 34-39.
[13] Zebarjad S M. The influence of glass fiber on fracture behavior of isotactic polypropylene[J]. Mater Des, 2003,7: 531-535.
[14] Jin shijiu,Zhang Chunxin,WangXia,YuYunzhao. Plasma Modified Polyaramid Fiber Surface and Fiber/Epoxy Interface[J]. Journal of Adhesion,1996,59: 251-263.
[15] 许小方. 玄武岩纤维增强环氧树脂复合工艺和机理的研究[D]. 北京: 北京林业大学,2010.
[16] 刘新宇,秦伟,王福平. 冷等离子体接枝处理对碳纤维织物/环氧复合材料界面性能的影响[J]. 航空材料学报, 2003,4(23):40-43.