EFFECT OF CARBOXYL FUNCTIONALIZEDMULTIWALLED CARBON NANOTUBES ON
 PROPERTIES OF T1000 CARBON FIBER/EPOXY COMPOSITES

Abstract

Abstract:

Carboxyl functionalizedmultiwalled carbon nanotubes (COOHMWNTs) were prepared as nanoreinforcement for T1000 carbon fiber/epoxy composites. COOHMWNTs can be uniformly dispersed in epoxy matrix. The experimental results show the interfacial properties and heatresistance properties of composite were improved. Mechanical test of filament wound composites exhibit a 28% enhancement in the shear strength after adding 1wt % COOHMWNTs.

Key words: multiwalled carbon nanotubes, epoxy, composites, chemical treatment

CLC Number:

TQ327.3

Tian, J. B., Liang, S. B., Sui, G., Yang, X. P.. EFFECT OF CARBOXYL FUNCTIONALIZEDMULTIWALLED CARBON NANOTUBES ON
PROPERTIES OF T1000 CARBON FIBER/EPOXY COMPOSITES[J]. Fiber Reinforced Plastics/Composites, 2010, 210(1): 36-39.

References

［1］赵稼祥. 先进复合材料的发展与展望［J］. 材料工程， 2000，(11):4046.
［2］王晓洁，尤丽虹，张炜，谢群炜. 高性能碳纤维表面分析及其力学性能研究［J］. 航空材料学报， 2006， 26(4): 119122.
［3］ Ajayan P， MSchadler， L S. SingleWalled Carbon NanotubePolymer Composites: Strength and Weakness［J］. AdV. Mater， 2000，(12)：750.
［4］ Cadek M， Coleman J N.Reinforcement of Polymers with Carbon Nanotubes: The Role of Nanotube Surface Area［J］. Nano Lett， 2004，(4):353.
［5］ Gao J B， Itkis M E. Continuous Spinning of a SingleWalled Carbon NanotubeNylon Composite Fiber［J］. J. Am. Chem. Soc.，2005，(127):3847.
［6］ Andrew G， Jason H. Fullerene Pipes［J］. Science， 1998，(280):12531254.
［7］ Haiqing Peng， Lawrence B. Sidewall Carboxylic Acid Functionalization of SingleWalled Carbon Nanotubes［J］. J. Am. Chem. Soc.，2003，(125):1517415182.
［8］ Junbo Gao， Bin Zhao. Chemical Engineering of the SingleWalled Carbon NanotubeNylon 6 Interface［J］. J. Am. Chem. Soc.，2006，(128):74927496.
［9］ Luis Ibrarra， David Panos. Dynamic Properties of Thermoplastics ButadieneStyrene(SBS) and Oxidized Short Carbon Fiber Composite Materials［J］. Journal of Applied Polymer Science， 1998， 67(10):18191826.
［10］ Ashida M， Noguchi T. Effect of Matrix’s Type on the Dynamic Properties for Short FiberSlastomer Composite［J］. Journal of Applied Polymer Science，1985，30（3): 10111021.
［11］ Elena Bekyarova， Erik T. Functionalized SingleWalled Carbon Nanotubes for Carbon FiberEpoxy Composites ［J］. Phys. Chem. C， 2007，(111):1786517871.
［12］ Weiming Chen， Yunhua Yu， Peng Li， Chengzhong Wang， Tongyue Zhou， Xiaoping Yang. Effect of new epoxy matrix for T800 carbon fiber/epoxy filament wound composites［J］. Composites Science and Technology， 2007， (67):22612270.

[1]	ZHANG Qian, ZHANG Yifan, ZOU Qi, ZHANG Peng, JIAO Yanan, AN Liuxu, LIU Yanfeng, ZHANG Daijun, HAO Junjie, CHEN Li. Connection performance and failure mechanisms of three-dimensional woven composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 5-11.
[2]	YAN Jiqiang, XIE Zongyou, LI Jun, ZOU Qi, LEI Shuai, CAO Tienan, ZHANG Daijun. Effect of ply angle on anti-high speed impact properties of polyimide fiber reinforced composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 12-18.
[3]	GUO Miaocai. The interlayer structures and lightning strike damage behaviors of the conductive particles modified highly tough composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 28-36.
[4]	LI Moying, ZHENG Linfeng, LIU Gang, LI Mengjiao, YAO Jianan. Adhesion study of carbon fiber/polyaryletherketone thermoplastic composites with epoxy coatings [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 37-42.
[5]	XIE Wenbo. Study on properties of high heat resistant and flame retardant epoxy resin matrix CFRP [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 43-47.
[6]	HUANG Daming, TANG Lixin, SUN Juntao, WANG Wei. Research on the effect of residual monomer acrylonitrile on the preparation of PAN-based carbon fiber [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 48-51.
[7]	YAN Lei, ZHAO Fei, HUAN Dajun, ZHANG Shengyuan, WANG Bin, XIAO Jun. Research on tension-tensile fatigue behavior and life prediction of T700/PPS filament winding thermoplastic composites with NOL rings [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 73-81.
[8]	SONG Jianhui, YU Xiaochen, ZHU Yingdan, WU Huaping, ZHANG Xiongjun, CHEN Gang. Advances in fatigue performance of fiber reinforced composite-metal hybrid joints [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 105-112.
[9]	HU Zehui, LI Yong, HUAN Dajun, HAN Bing, GUO Da. Research status and development trend of Z-pin reinforced anti-heat insulation composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 125-132.
[10]	WANG Xiaoming, WANG Xiaobo, CHENG Yanan, ZHANG Chen, QUAN Zhenzhen, ZHANG Hui, LIU Yong, SUN Houli, YU Jianyong. Fabrication and impact performance analysis of carbon/Kevlar fiber hybrid 3D braided composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 5-10.
[11]	LI Jiamin, TAN Lina, JIANG Hanwei, FAN Ruyi, RAN Qichao. Study on properties of epoxy modified benzoxazine resin for RTM technology [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 11-16.
[12]	LING Xujie, CHEN Yinhong, LU Yizhou, FANG Yuan. Study on flame retardant properties and impact properties of flame retardant microcapsule modified glass fiber reinforced polymer composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 17-23.
[13]	MAO Jingqiao, HU Yiling, PANG You, YANG Yuqiu. Preparation and performance study of sizing treated carbon fiber/polypropylene composite molded by CF/PP fiber mat [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 32-38.
[14]	WANG Haoda, ZHU Fuxian, HU Kejun, XU Xianyi. Parametric finite element modeling method for fiber reinforced composite bolted structures [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 53-61.
[15]	XIE Lilai, HU Congliang, DONG Min, YANG Xiaohui, LIU Penghui. Fatigue life calculation method of wind turbine blade based on piecewise linear mean stresses correction [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 62-69.