THE ROLE OF TEMPERATURE ON IMPACT PROPERTIES OF
 KEVLAR/FIBERGLASS COMPOSITE LAMINATES

Abstract

Abstract:

This paper demonstrated results of an experimental study on Kevlar/fiberglass composite

laminate subjected to impact loading at variable temperaturesThe effect of temperature on maximum

energy， elastic energy， maximum deflection after impact was studied at several low velocity impact

energy levels(8J， 15J and 25J) The temperatures considered were in the range of -50℃ to 120℃

Results indicated that impact performance of these composites was affected over the range of

temperature considered.

Key words: impact behaviour, delamination, composite

CLC Number:

TB332

Cite this article

Liu, H. Y., Liu, D. Q.. THE ROLE OF TEMPERATURE ON IMPACT PROPERTIES OF
KEVLAR/FIBERGLASS COMPOSITE LAMINATES[J]. Fiber Reinforced Plastics/Composites, 2009, 205(6): 25-27.

share this article

/ Recommend

Add to citation manager EndNote|Ris|BibTeX

URL: https://frp.cn/EN/

https://frp.cn/EN/Y2009/V205/I6/25

［1］沈军航空用复合材料的研究与应用进展［J］.玻璃钢/复合材料，2006，（5）：4849
［2］张梅单向芳纶/玻璃纤维混杂材料板材拉伸性能研究［J］.玻璃钢/复合材料，2007，（6）：3537
［3］申明霞芳纶纤维表面涂覆层组成及其力学性能关系研究［J］.玻璃钢/复合材料，2006，（4）：2021
［4］ Han KS， Koutsky J The interlaminar fracture energy of glass fiber reinforced polyester

composites ［J］. Compos Mater， 1981，15：371
［5］ Street KN， Russell AJ， Bonsang F Thermal damage effects on delamination toughness of a

graphit/epoxy composite［J］. Compos Sci Technol， 1988， 32：114
［6］ Rojstaczer S， Cohen D， Marom G Thermal expansion of Kevlar fibers and composites［J］.

Mater Sci Lett，1985，4：1233
［7］ Amin SalehiKhojin， Reza Bashirzadeh. The role of temperature on impact properties of

Kevlar/fiberglass composite laminates［J］. Composites part B，2006，37：593602

Related Articles 15

[1]	ZHANG Qian, ZHANG Yifan, ZOU Qi, ZHANG Peng, JIAO Yanan, AN Liuxu, LIU Yanfeng, ZHANG Daijun, HAO Junjie, CHEN Li. Connection performance and failure mechanisms of three-dimensional woven composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 5-11.
[2]	YAN Jiqiang, XIE Zongyou, LI Jun, ZOU Qi, LEI Shuai, CAO Tienan, ZHANG Daijun. Effect of ply angle on anti-high speed impact properties of polyimide fiber reinforced composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 12-18.
[3]	LÜ Xujin, HUO Hongyu, PENG Gongqiu, ZHANG Baoyan, YE Jinqiu, LIU Yong. Electrospun PPESK fiber mats interlayer toughened carbon fiber/epoxy resin composite [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 19-27.
[4]	GUO Miaocai. The interlayer structures and lightning strike damage behaviors of the conductive particles modified highly tough composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 28-36.
[5]	LI Moying, ZHENG Linfeng, LIU Gang, LI Mengjiao, YAO Jianan. Adhesion study of carbon fiber/polyaryletherketone thermoplastic composites with epoxy coatings [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 37-42.
[6]	HUANG Daming, TANG Lixin, SUN Juntao, WANG Wei. Research on the effect of residual monomer acrylonitrile on the preparation of PAN-based carbon fiber [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 48-51.
[7]	FENG Zhenhui, WANG Zhe, ZENG Jie, CHEN Binbin, FENG Chunle, ZHOU Fan. A method for optical fiber impact localization and load history reconstruction of composite laminates [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 52-56.
[8]	ZHANG Dewei, WEI Wei, ZHANG Pin, WANG Qi, ZHAO Cong, AN Luling. Shape control of aircraft composite components based on measured data [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 57-66.
[9]	YAN Chao, RONG Xiaoyuan, ZHAO Yueqing, QIAN Zhongjian. Curing deformation study of composite cobonding omega stringer stiffened panel [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 67-72.
[10]	YAN Lei, ZHAO Fei, HUAN Dajun, ZHANG Shengyuan, WANG Bin, XIAO Jun. Research on tension-tensile fatigue behavior and life prediction of T700/PPS filament winding thermoplastic composites with NOL rings [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 73-81.
[11]	CHENG Libing, XU Weiwei, LI Bo, WEN Shiqi. Research on microwave curing process for rib composite parts [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 82-86.
[12]	WU Haisheng, LUO Jintao, GU Yizhuo, SUN Tianfeng, LIU Jia, YAO Qi, LI Yu. Study on structural stability of high-modulus carbon fiber composite tube in alternating high and low temperature environment [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 87-91.
[13]	FU Chengjian, LIN Song, GUO Shufen. Prediction and analysis of burst pressure of type Ⅳ composite cylinder based on progressive damage [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 92-97.
[14]	XU Lin, LIU Chuanjun, ZHAO Chongshu. Application and development trends of composite materials in civil aircraft [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 98-104.
[15]	SONG Jianhui, YU Xiaochen, ZHU Yingdan, WU Huaping, ZHANG Xiongjun, CHEN Gang. Advances in fatigue performance of fiber reinforced composite-metal hybrid joints [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 105-112.

Metrics

Viewed

Full text

Abstract

Comments

Abstract
References
Related Articles
Recommended Articles
Metrics
Comments

TOP