A review of liner damage and burst failure studies for vehicle mounted type Ⅳ high pressure hydrogen storage tanks

doi:10.19936/j.cnki.2096-8000.20240828.014

Abstract

Abstract: High pressure hydrogen storage tank is the key equipment of hydrogen fuel cell vehicle. The application and popularization of hydrogen storage tank will be an important breakthrough for the commercial development of hydrogen energy vehicles, and type Ⅳ hydrogen storage tank is considered as one of the most potential energy storage equipment for hydrogen fuel cell passenger cars. This paper summarizes the latest research achievements on the liner damage and burst failure of type Ⅳ hydrogen storage tank, summarizes the common failure criteria according to the time sequence, and analyzes the failure mechanism and the factors causing the failure in detail. At the same time, the different damage models of type Ⅳ hydrogen tanks are compared, the shortcomings of the existing failure research of type Ⅳ hydrogen tanks are discussed, and the future development direction is prospected to help establish the quality evaluation system of type Ⅳ hydrogen tanks.

Key words: type Ⅳ hydrogen storage tank, liner damage, burst failure, failure criteria, damage model, composite

CLC Number:

TB332

ZHANG Yikai, FENG Jiaji, GU Junfeng, SUN Xiujie, RUAN Shilun. A review of liner damage and burst failure studies for vehicle mounted type Ⅳ high pressure hydrogen storage tanks[J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(8): 97-109.

References

[1] 于永初. 《节能与新能源汽车技术路线图2.0》引领中国汽车产业发展[J]. 汽车工艺师, 2020(11): 8-10.
[2] ZHANG M, LV H, KANG H R, et al. A literature review of failure prediction and analysis methods for composite high-pressure hydrogen storage tanks[J]. International Journal of Hydrogen Energy, 2019, 44(47): 25777-25799.
[3] MELNICHUK M, GARDAVAUD Q, THIEBAUD F, et al. Numerical assestments of maximum depressurisation rate for polymer materials under high-pressure hydrogen[J]. International Journal of Hydrogen Energy, 2021, 46(53): 27088-27095.
[4] MELNICHUK M, THIÉBAUD F, PERREUX D. Non-dimensional assessments to estimate decompression failure in polymers for hydrogen systems[J]. International Journal of Hydrogen Energy, 2020, 45(11): 6738-6744.
[5] PEPIN J, LAINE E, GRANDIDIER J C, et al. Determination of key parameters responsible for polymeric liner collapse in hyperbaric type Ⅳ hydrogen storage vessels[J]. International Journal of Hydrogen Energy, 2018, 43(33): 16386-16399.
[6] BLANC-VANNET P, PAPIN P, WEBER M, et al. Sample scale testing method to prevent collapse of plastic liners in composite pressure vessels[J]. International Journal of Hydrogen Energy, 2019, 44(17): 8682-8691.
[7] ONO H, FUJIWARA H, ONOUE K, et al. Influence of repetitions of the high-pressure hydrogen gas exposure on the internal damage quantity of high-density polyethylene evaluated by transmitted light digital image[J]. International Journal of Hydrogen Energy, 2019, 44(41): 23303-23319.
[8] KULKARNI S S, CHOI K S, KUANG W, et al. Damage evolution in polymer due to exposure to high-pressure hydrogen gas[J]. International Journal of Hydrogen Energy, 2021, 46(36): 19001-19022.
[9] YERSAK T A, BAKER D R, YANAGISAWA Y, et al. Predictive model for depressurization-induced blistering of type Ⅳ tank liners for hydrogen storage[J]. International Journal of Hydrogen Energy, 2017, 42(8): 28910-28917.
[10] FUJIWARA H, ONO H, ONOUE K, et al. High-pressure gaseous hydrogen permeation test method-property of polymeric materials for high-pressure hydrogen devices (1)[J]. International Journal of Hydrogen Energy, 2020, 45(53): 29082-29094.
[11] YAMABE J, KOGA A, NISHIMURA S. Failure behavior of rubber O-ring under cyclic exposure to high-pressure hydrogen gas[J]. Engineering Failure Analysis, 2013, 35: 193-205.
[12] 查燕, 王修磊, 杨卫民, 等. Ⅳ型储氢瓶塑料内胆坍塌剥离机理数值仿真研究[C]//第十七届中国CAE工程分析技术年会. 海口: 2021: 157-159, 173.
[13] PAWLAK A. Cavitation during tensile deformation of isothermally crystallized polypropylene and high-density polyethylene[J]. Colloid and Polymer Science, 2013, 291(4): 773-787.
[14] PEPIN J, LAINE E, GRANDIDIER J-C, et al. Replication of liner collapse phenomenon observed in hyperbaric type Ⅳ hydrogen storage vessel by explosive decompression experiments[J]. International Journal of Hydrogen Energy, 2018, 43(9): 4671-4680.
[15] SU Y, LV H, ZHOU W, et al. Review of the hydrogen permeability of the liner material of type Ⅳ on-board hydrogen storage tank[J]. World Electric Vehicle Journal, 2021, 12(3): 130.
[16] YAMABE J, NISHIMURA S. Influence of fillers on hydrogen penetration properties and blister fracture of rubber composites for O-ring exposed to high-pressure hydrogen gas[J]. International Journal of Hydrogen Energy, 2009, 34(4): 1977-1989.
[17] GERLAND M, BOYER S A E, CASTAGNET S. Early stages of cavitation in a stretched and decompressed poly (vinylidene fluoride) exposed to diffusive hydrogen, observed by transmission electronic microscopy at the nanoscale[J]. International Journal of Hydrogen Energy, 2016, 41(3): 1766-1774.
[18] KOGA A, UCHIDA K, YAMABE J, et al. Evaluation on high-pressure hydrogen decompression failure of rubber O-ring using design of experiments[J]. International Journal of Automotive Engineering, 2011, 2(4): 123-129.
[19] ONO H, NAIT-ALI A, KANE DIALLO O, et al. Influence of pressure cycling on damage evolution in an unfilled EPDM exposed to high-pressure hydrogen[J]. International Journal of Fracture, 2018, 210(1): 137-152.
[20] BAUDET C, GRANDIDIER J C, CANGEMI L. A damage model for the blistering of polyvinylidene fluoride subjected to carbon dioxide decompression[J]. Journal of the Mechanics and Physics of Solids, 2011, 59(9): 1909-1926.
[21] DEWIMILLE B, MARTIN J, JARRIN J. Behavior of thermoplastic polymers during explosive decompressions in a petroleum environment[J]. Journal De Physique Ⅳ, 1993, 3(C7): 1559-1564.
[22] 陈旦. 碳纤维缠绕Ⅳ型复合材料压力容器的结构设计与研制[D]. 武汉: 武汉理工大学, 2019.
[23] 贾子璇. 塑料内衬复合材料储氢气瓶的结构设计及有限元验证[D]. 北京: 北京化工大学, 2020.
[24] WANG L, ZHENG C, LUO H, et al. Continuum damage modeling and progressive failure analysis of carbon fiber/epoxy composite pressure vessel[J]. Composite Structures, 2015, 134: 475-482.
[25] RAMIREZ J P B, HALM D, GRANDIDIER J-C, et al. 700 bar type Ⅳ high pressure hydrogen storage vessel burst-simulation and experimental validation[J]. International Journal of Hydrogen Energy, 2015, 40(38): 13183-13192.
[26] 陈明和, 胡正云, 贾晓龙, 等. Ⅳ型车载储氢气瓶关键技术研究进展[J]. 压力容器, 2020, 37(11): 39-50.
[27] MAGNEVILLE B, GENTILLEAU B, VILLALONGA S, et al. Modeling, parameters identification and experimental validation of composite materials behavior law used in 700 bar type Ⅳ hydrogen high pressure storage vessel[J]. International Journal of Hydrogen Energy, 2015, 40(38): 13193-13205.
[28] HILL R. A theory of the yielding and plastic flow of anisotropic metals[J]. Proceedings of the Royal Society of London Series A Mathematical and Physical Sciences, 1948, 193(1033): 281-297.
[29] TSAI S W. Strength characteristics of composite materials[R]. Philco Corp Newport Beach CA, 1965.
[30] HOFFMAN O. The Brittle Strength of Orthotropic Materials[J]. Journal of Composite Materials, 1967, 1(2): 200-206.
[31] TSAI S W, WU E M. A General theory of strength for anisotropic materials[J]. Journal of Composite Materials, 1971, 5(1): 58-80.
[32] HASHIN Z, ROTEM A. A fatigue failure criterion for fiber reinforced materials[J]. Journal of Composite Materials, 1973, 7(4): 448-464.
[33] HASHIN Z. Failure criteria for unidirectional fiber composites[J]. Journal of Applied Mechanics, 1980, 47(2): 329-334.
[34] CHANG F K, CHANG K Y. A Progressive damage model for laminated composites containing stress concentrations[J]. Journal of Composite Materials, 1987, 21(9): 834-855.
[35] KADDOUR A S, HINTON M J, SMITH P A, et al. The background to the third world-wide failure exercise[J]. Journal of Composite Materials, 2013, 47(20-21): 2417-2426.
[36] PUCK A, SCHURMANN H. Failure analysis of FRP laminates by means of physically based phenomenological models[J]. Composites Science and Technology, 1998, 58(7): 1045-1067.
[37] DAVILA C, JAUNKY N, GOSWAMI S. Failure criteria for FRP laminates in plane stress[C]//Proceedings of the 44th AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics, and materials conference. 2003: 1991.
[38] DÁVILA C G, CAMANHO P P, ROSE C A. Failure criteria for FRP laminates[J]. Journal of Composite Materials, 2005, 39(4): 323-345.
[39] PINHO S T, DÁVILA C G, CAMANHO P P, et al. Failure models and criteria for FRP under in-plane or three-dimensional stress states including shear non-linearity[R]. 2005.
[40] PINHO S T, DARVIZEH R, ROBINSON P, et al. Material and structural response of polymer-matrix fibre-reinforced composites[J]. Journal of Composite Materials, 2012, 46(19-20): 2313-2341.
[41] HA S K, JIN K K, HUANG Y. Micro-mechanics of failure (MMF) for continuous fiber reinforced composites[J]. Journal of Composite Materials, 2008, 42(18): 1873-1895.
[42] BARTHÉLEMY H, WEBER M, BARBIER F. Hydrogen storage: Recent improvements and industrial perspectives[J]. International Journal of Hydrogen Energy, 2017, 42(11): 7254-7262.
[43] MAUS S D-P, HAPKE J, RANONG C N, et al. Filling procedure for vehicles with compressed hydrogen tanks[J]. International Journal of Hydrogen Energy, 2008, 33(17): 4612-4621.
[44] GENTILLEAU B, TOUCHARD F, GRANDIDIER J C. Numerical study of influence of temperature and matrix cracking on type Ⅳ hydrogen high pressure storage vessel behavior[J]. Composite Structures, 2014, 111: 98-110.
[45] HU Z, CHEN M, ZU L, et al. Investigation on failure behaviors of 70 MPa type Ⅳ carbon fiber overwound hydrogen storage vessels[J]. Composite Structures, 2020, 259(9): 113387.
[46] 郭晓璐, 刘孝亮, 徐双庆. 车载储氢气瓶循环特性研究进展[C]//第十届全国压力容器学术会议. 杭州: 2021: 840-846.
[47] WANG D, LIAO B, HUA Z, et al. Experimental analysis on residual performance of used 70 MPa type Ⅳ composite pressure vessels[J]. Journal of Failure Analysis and Prevention, 2019, 19(1): 204-211.
[48] CHOU H Y, MOURITZ A, BANNISTER M K, et al. Acoustic emission analysis of composite pressure vessels under constant and cyclic pressure[J]. Composites Part A: Applied Science and Manufacturing, 2015, 70: 111-120.
[49] WU E, ZHAO Y, ZHAO B, et al. Fatigue life prediction and verification of high-pressure hydrogen storage vessel[J]. International Journal of Hydrogen Energy, 2021, 46(59): 30412-30422.
[50] MUNZKE D, DUFFNER E, EISERMANN R, et al. Monitoring of type Ⅳ composite pressure vessels with multilayer fully integrated optical fiber based distributed strain sensing[J]. Materials Today: Proceedings, 2021, 34: 217-223.
[51] MOTAHARINEJAD V, DELNAUD L, FOUQUE M, et al. Enhancement of adhesion between the polymeric liner and the metallic connector of high-pressure hydrogen storage tank[J]. International Journal of Material Forming, 2021, 14: 249-260.
[52] JOHNSON K, VEENSTRA M J, GOTTHOLD D, et al. Advancements and opportunities for on-board 700 bar compressed hydrogen tanks in the progression towards the commercialization of fuel cell vehicles[J]. SAE International Journal of Alternative Powertrains, 2017, 6(2): 201-218.
[53] HUA T Q, ROH H-S, AHLUWALIA R K. Performance assessment of 700-bar compressed hydrogen storage for light duty fuel cell vehicles[J]. International Journal of Hydrogen Energy, 2017, 42(40): 25121-25129.
[54] PARK G, JANG H, KIM C. Design of composite layer and liner for structure safety of hydrogen pressure vessel (type 4)[J]. Journal of Mechanical Science and Technology, 2021, 35(8): 3507-3517.
[55] RAMIREZ J P B, HALM D, GRANCLIDIER J C, et al. A fixed directions damage model for composite materials dedicated to hyperbaric type Ⅳ hydrogen storage vessel-Part Ⅰ: Model formulation and identification[J]. International Journal of Hydrogen Energy, 2015, 40(38): 13165-13173.
[56] RAMIREZ J P B, HALM D, GRANDIDIER J C, et al. A fixed directions damage model for composite materials dedicated to hyperbaric type Ⅳ hydrogen storage vessel-Part Ⅱ: Validation on notched structures[J]. International Journal of Hydrogen Energy, 2015, 40(38): 13174-13182.
[57] LEH D, SAFFRE P, FRANCESCATO P, et al. A progressive failure analysis of a 700 bar type Ⅳ hydrogen composite pressure vessel[J]. International Journal of Hydrogen Energy, 2015, 40(38): 13206-13214.
[58] BERTIN M, VILLALONGA S, VERNÈDE M, et al. Mechanical behaviour of 700 bar type Ⅳ high pressure vessel: Comparison between simulations and experiments through Osirhys Ⅳ project[C]//Proceedings of the 15th European Conference on Composite Materials (ECCM-15). 2012: 8.
[59] GENTILLEAU B, VILLALONGA S, NONY F, et al. A probabilistic damage behavior law for composite material dedicated to composite pressure vessel[J]. International Journal of Hydrogen Energy, 2015, 40: 13160-13164.
[60] RAFIEE R, TORABI M A. Stochastic prediction of burst pressure in composite pressure vessels[J]. Composite Structures, 2018, 185: 573-583.
[61] RAMIREZ J B, HALM D, GRANDIDIER J C. Deterministic vs probabilistic burst prediction of wound composite pressure vessel[C]//Proceedings of the ICCST 9-International Conference on Composite Science and Technology, Sorrento, Naples, Italy, 24-26 April 2013. 2013.
[62] 上海石化碳纤维储氢气瓶技术取得新突破[N]. 中国石化报, 2021-10-20 (001).