Modeling method and performance evaluation of filament-wound hydrogen storage cylinder with layer-by-layer renewal

doi:10.19936/j.cnki.2096-8000.20230228.008

Abstract

Abstract: In this paper, a layer-by-layer updating modeling method for filament-wound hydrogen storage cylinder based on 3D laser scanning system and ABAQUS is presented. By programming in Python, the geometric data obtained from the 3D scanner are fitted by non-uniform Rational B spline, and combined with the winding angle generated by the winding software to generate the finite element model in ABAQUS. The validity of the finite element model was verified by comparing the results of hydraulic blasting test with Hashin criterion, and the failure mechanism of filament-wound hydrogen storage cylinders was explored. The results show that, the blasting pressure and strain response predicted by the finite element model are within 5% of the test results, and the predicted blasting location and failure mode are consistent with the test results.

Key words: composite hydrogen cylinder, layer-by-layer updating method, progressive failure, damage criterion

CLC Number:

TB332

ZHANG Guiming, SONG Chunyu, ZU Lei, ZHANG Qian, CHEN Shijun, FU Jianhui, LI Debao, GENG Hongbo. Modeling method and performance evaluation of filament-wound hydrogen storage cylinder with layer-by-layer renewal[J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(2): 60-66.

References

[1] OLABI A G, WILBERFORCE T, ABDELKAREEM M A. Fuel cell application in the automotive industry and future perspective[J]. Energy, 2021, 214: 118955.
[2] 秦玉琪, 袁奕雯, 杨振国. 纤维缠绕储氢气瓶及燃料汽车应用现状综述[J]. 中国特种设备安全, 2019, 35(2): 70-75.
[3] O’MALLEY K, ORDAZ G, ADAMS J, et al. Applied hydrogen storage research and development: A perspective from the U.S. Department of Energy[J]. Journal of Alloys & Compounds, 2015, 645: 419-422.
[4] WANG Y, DAI X, YOU H, et al. Research on the design of hydrogen supply system of 70 MPa hydrogen storage cylinder for vehicles[J]. International Journal of Hydrogen Energy, 2018, 43(41): 19189-19195.
[5] REN M F, CHANG X, XU H Y, et al. Trans-scale analysis of composite overwrapped pressure vessel at cryogenic temperature[J]. Composite Structures, 2017, 160: 1339-1347.
[6] LIU P F, CHU J K, HOU S J, et al. Micromechanical damage modeling and multiscale progressive failure analysis of composite pressure vessel[J]. Computational Materials Science, 2012, 60: 137-148.
[7] RAMIREZ J P B, HALM D, GRANDIDIER J C, et al. 700 bar type Ⅳ high pressure hydrogen storage vessel burst-simulation and experimental validation[J]. International Journal of Hydrogen Energy, 2015, 40(38): 13183-13192.
[8] JOHANSEN B S, LYSTRUP A, JENSEN M T. CADPATH : A complete program for the CAD-, CAE-and CAM-winding of advanced fibre composites[J]. Journal of Materials Processing Technology, 1998, 77(1): 194-200.
[9] RAFIEE R, TORABI M A. Stochastic prediction of burst pressure in composite pressure vessels[J]. Composite Structures, 2018, 185: 573-583.
[10] ZU L, XU H, WANG H B, et al. Design and analysis of filament wound composite pressure vessels based on non-geodesic winding[J]. Composite Structures, 2019, 207: 41-52.
[11] ZU L, KOUSSIOS S, BEUKERS A. A novel design solution for improving the performance of composite toroidal hydrogen storage tanks[J]. International Journal of Hydrogen Energy, 2012, 37(19): 14343-14350.
[12] ZU L, XU H, ZHANG Q, et al. Design of filament-wound spherical pressure vessels based on non-geodesic trajectories[J]. Composite Structures, 2019, 218: 71-78.
[13] ZHANG Q, XU H, JIA X, et al. Design of a 70MPa type Ⅳ hydrogen storage vessel using accurate modeling techniques for dome thickness prediction[J]. Composite Structures, 2020, 236:111915.
[14] 赫晓东, 王荣国, 矫维成, 等. 纤维缠绕复合材料压力容器封头厚度预测[J]. 复合材料学报, 2010, 27(5): 116-121.
[15] 王华毕, 程硕, 祖磊, 等. 复合材料储氢气瓶的纤维厚度预测与强度分析[J]. 复合材料科学与工程, 2020(5): 5-11.
[16] NEBE M, SORINNO A, BRAUN C, et al. Analysis on the mechanical response of composite pressure vessels during internal pressure loading: FE modeling and experimental correlation[J]. Composites Part B: Engineering, 2021, 212: 108550.
[17] 惠虎, 柏慧, 黄淞, 等. 纤维缠绕复合材料压力容器的研究现状[J]. 压力容器, 2021, 38(4): 53-63.
[18] PIEGL L, TILLER W. 非均匀有理B样条[M]. 北京: 清华大学出版社, 2010.
[19] 贾利勇, 富琛阳子, 贺高, 等. ABAQUS GUI程序开发指南Python语言[M]. 北京: 人民邮电出版社, 2014.
[20] 苏景鹤, 江丙云. ABAQUS Python二次开发攻略[M]. 北京: 人民邮电出版社, 2016.
[21] 陈汝训. 纤维缠绕壳体设计的网格分析方法[J]. 固体火箭技术, 2003, 26(1): 30-32.
[22] 贾子璇, 林松, 贾晓龙, 等. 基于渐进损伤数值模拟的复合材料气瓶爆破压强优化[J]. 复合材料科学与工程, 2020(8): 25-31.
[23] HASHIN Z. Failure criteria for unidirectional fiber compositer[J]. Journal of Applied Mechanics, 1980, 47(2): 329-334.
[24] CAMANHO P P, MATTHEWS F L. A progressive damage model for mechanically fastened joints in composite laminates[J]. Journal of Composite Materials, 1999, 33(24): 2248-2280.
[25] WANG Q, LI T, WANG B, et al. Prediction of void growth and fiber volume fraction based on filament winding process mechanics[J]. Composite Structures, 2020, 246: 112432.
[26] 杨帆. 冲击作用下复合材料气瓶损伤形态与剩余强度[D]. 大连: 大连理工大学, 2019.
[27] 车用压缩氢气铝内胆碳纤维全缠绕气瓶: GB/T 35544—2017[S]. 北京: 中国标准出版社, 2017.