Study on influencing factors of R-area porosity of composite C purlin

doi:10.19936/j.cnki.2096-8000.20220828.016

Abstract

Abstract: According to the structure of composite C purlin, the influencing factors of R-area porosity of C purlin are studied through the process soft mold, pre-compaction operation and change of process parameters. The results show that the porosity in the R-area of C purlin can be significantly reduced by using the process soft mold in the curing process. To a certain extent, the stiffness of the soft mold can be improved and the porosity can be reduced, but when the stiffness of the soft mold reaches a certain degree, increasing the stiffness of the soft mold can not further reduce the porosity. Pre-compaction before curing can reduce the porosity of R-area of C purlin, and increasing the pressure and vacuum pumping operation can also reduce the porosity in the R-area.

Key words: composite, R-area, porosity

CLC Number:

TB332

YUAN Chao, LI Feng, CHEN Jing, QIU Qi-yan. Study on influencing factors of R-area porosity of composite C purlin[J]. COMPOSITES SCIENCE AND ENGINEERING, 2022, 0(8): 105-109.

References

[1] 杜善义. 先进复合材料与航空航天[J]. 复合材料学报, 2007(1): 1-12.
[2] 黄雪萌, 房晓斌, 刘明泽. 梁类零件R区质量控制技术研究[J]. 橡塑技术与装备(塑料), 46(24): 24-27.
[3] 李艳霞, 李敏, 张佐光, 等. L形复合材料层板热压工艺密实变形过程的数值模拟[J]. 复合材料学报, 2008(3): 78-83.
[4] 肖鹏, 刘卫平, 刘奎, 等. 碳纤维复合材料孔隙分布及形貌分析研究[J]. 玻璃钢/复合材料, 2016(2): 62-66.
[5] YAN X Q. Consolidation simulation of composites laminates: Formulation and validation verification[J]. Polymer Composites, 2005, 26(6): 813-822.
[6] 邓火英, 顾轶卓, 李敏, 等. 热压罐成型变厚度层板缺陷研究[J]. 宇航材料工艺, 2007(6): 65-69.
[7] HUBERT P, VAZIRI R, POURSARTIP A. A two-dimensional flow model for the process simulation of complex shape composite laminates[J]. International Journal for Numerical Methods in Engineering, 1999, 44(1): 1-26.
[8] CIRISCIOLI P R, WANG Q L, SPRINGER G S. Autoclave curing comparisons of model and test result[J]. Journal of Composite Materials, 1992, 26(1): 90-102.
[9] YOUNG W B. Consolidation and cure simulations for laminated composites[J]. Polymer Composites, 1996, 17(1): 142-148.
[10] 王晓亮. 某聚酰亚胺基复合材料构件R角内部缺陷研究[J]. 航空制造技术, 2013(7): 67-69.
[11] 王雪明, 谢富原, 李敏, 等. 热压罐成型加筋板L形筋条纤维密实影响因素研究[J]. 航空材料学报, 2011, 31(4): 64-68.
[12] 阳波, 郝巨, 李玉杨, 等. C形复合材料成型模具补偿设计及制造技术研究[C]//中国航空学会、中国宇航学会、中国力学学会、中国复合材料学会. 第二十一届全国复合材料学术会议(NCCM-21)论文集. 内蒙古: 2020: 10.
[13] 谢富原, 王雪明, 李敏, 等. T形加筋板热压罐成型过程压力分布与树脂流动实验研究[J]. 复合材料学报, 2009, 26(6): 66-71.
[14] 龚颖, 张佐光, 顾轶卓, 等. 热压工艺参数对单向复合材料层板密实状态的影响[J]. 复合材料学报, 2006(1): 12-16.
[15] BLESTA D C, DUFFYB B R, MCKEEB S. Curing simulation of thermoset composites[J]. Composites Part A, 1999, 30(11): 1289-1309.