Research on burst strength and fatigue performance of carbon fiber wound composite cylinder with aluminum alloy liner

doi:10.19936/j.cnki.2096-8000.20220828.005

Abstract

Abstract: In this paper, the relationship between burst pressure and fatigue life of carbon fiber wound composite cylinders with aluminum alloy liner is studied by means of experimental tests and numerical simulations. The design and manufacture of carbon fiber wound composite cylinders with aluminum alloy liner were carried out, and the hydrostatic burst and fatigue performance tests were carried out. The burst pressure, fatigue life and failure morphology of the cylinders were obtained. The burst pressure prediction method based on progressive damage analysis model and the fatigue life prediction method based on Morrow mean stress correction and Manson-Coffin equivalent strain are proposed, and the prediction results agree with the tests. The influence of cylinder design parameters on burst pressure and fatigue life is analyzed. It reveals that under the condition of higher nominal pressure or larger diameter of the cylinder, it is difficult for the cylinder with 2.25 times burst safety factor to meet the requirements of minimum burst pressure and minimum fatigue life at the same time only by autofrettage, and it is necessary to appropriately increase the burst safety factor or the thickness of the cylinder.

Key words: carbon fiber wound cylinder, aluminum alloy liner, fatigue life, burst pressure, parameter analysis

CLC Number:

TB332

KANG Kai, ZU Lei, WU Qiao-guo, ZHANG Qian, ZHANG Gui-ming. Research on burst strength and fatigue performance of carbon fiber wound composite cylinder with aluminum alloy liner[J]. COMPOSITES SCIENCE AND ENGINEERING, 2022, 0(8): 35-43.

References

[1] YAMASHITA A, KONDO M, GOTO S, et al. Development of high-pressure hydrogen storage system for the toyota "Mirai"[C]//SAE 2015 World Congress & Exhibition. 2015.
[2] THOMAS A, YERSAK, DANIEL R, et al. Predictive model for depressurization-induced blistering of type Ⅳ tank liners for hydrogen storage[J]. International Journal of Hydrogen Energy, 2017, 42(48): 28910-28917.
[3] ZU L, KOUSSIOS S, BEUKERS A. A novel design solution for improving the performance of composite toroidal hydrogen storage tanks[J]. International Journal of Hydrogen Energy, 2012, 37(19): 14343-14350.
[4] 何琦, 黄良, 金明哲, 等. 长管拖车钢质内胆玻璃纤维缠绕气瓶纤维层冲击损伤探究[J]. 河南科技, 2019(35): 140-143.
[5] WANG L, WANG B, WEI S, et al. Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure[J]. Composites Part B, 2016, 97: 274-281.
[6] MNA D, ASA B, CB A, et al. Analysis on the mechanical response of composite pressure vessels during internal pressure loading: FE modeling and experimental correlation[J]. Composites Part B: Engineering, 2020, 212: 108550.
[7] LIU P F, CHU J K, HOU S J, et al. Micromechanical damage modeling and multiscale progressive failure analysis of composite pressure vessel[J]. Computational Materials Science, 2012, 60 : 137-148.
[8] JUAN, PEDRO, BERRO, et al. 700 bar type Ⅳ high pressure hydrogen storage vessel burst-Simulation and experimental validation[J]. International Journal of Hydrogen Energy, 2015, 40(38): 13183-13192.
[9] ZU L, XU H, WANG H, et al. Design and analysis of filament-wound composite pressure vessels based on non-geodesic winding[J]. Composite Structures, 2019,207: 41-52.
[10] ZHANG Q, XU H, JIA X, et al. Design of a 70 MPa type Ⅳ hydrogen storage vessel using accurate modeling techniques for dome thickness prediction[J]. Composite Structures, 2020, 236: 111915.
[11] RAFIEE R, TORABI M A. Stochastic prediction of burst pressure in composite pressure vessels[J]. Composite Structures, 2018, 185: 573-583.
[12] LIAO B B, WANG D L, JIA L Y, et al. Continuum damage modeling and progressive failure analysis of a Type Ⅲ composite vessel by considering the effect of autofrettage[J]. Journal of Zhejiang University-Science A: Applied Physics & Engineering, 2019, 20(1): 36-49.
[13] WU Q G, CHEN X D, FAN Z C, et al. Stress and damage analyses of composite overwrapped pressure vessel[J]. Procedia Engineering, 2015, 130(6): 32-40.
[14] LIN S, JIA X, SUN H, et al. Thermo-mechanical properties of filament wound CFRP vessel under hydraulic and atmospheric fatigue cycling[J]. Composites Part B Engineering, 2013, 46: 227-233.
[15] KIM Y S, KIM L H, PARK J S. The effect of composite damage on fatigue life of the high pressure vessel for natural gas vehicles[J]. Composite Structures, 2011, 93(11): 2963-2968.
[16] WU E Q, ZHAO Y, ZHAO B, et al. Fatigue life prediction and verification of high-pressure hydrogen storage vessel[J]. International Journal of Hydrogen Energy, 2021, 46(59): 30412-30422.
[17] 车用压缩氢气铝内胆碳纤维全缠绕气瓶: GB/T 35544—2017[S]. 中华人民共和国国家质量监督检验检疫总局, 中国国家标准化管理委员会, 2017.
[18] HASHIN Z. Fatigue failure criteria for unidirectional fiber composites[J]. Journal of Applied Mechanics, 1981, 48(4): 846-852.
[19] CAMANHO P P, MATTHEWS F L. A progressive damage model for mechanically fastened joints in composite laminates[J]. Journal of Composite Materials, 2016, 33(24): 2248-2280.
[20] BRECHET Y, MAGNIN T, SORNETTE D. The Coffin-Manson law as a consequence of the statistical nature of the LCF surface damage[J]. Acta Metallurgica Et Materialia, 1992, 40(9): 2281-2287.
[21] BOLLER C, SEEGER T. Materials data for cyclic loading[M]. Elsevier, 1987.
[22] DOWLING N E. Mean stress effects in strain-life fatigue[J]. Fatigue & Fracture of Engineering Materials & Structures, 2009, 32(12): 1004-1019.
[23] 倪侃. 随机疲劳累积损伤理论研究进展[J]. 力学进展, 1999, 29(1): 43-65.
[24] 嵇应凤, 姚卫星, 夏天翔. 线性疲劳累积损伤准则适用性评估[J]. 力学与实践, 2015, 37(6): 674-682.