通电过程中单向连续CFRP的暂态效应

玻璃钢/复合材料 ›› 2018, Vol. 0 ›› Issue (8): 32-35.

通电过程中单向连续CFRP的暂态效应

李静¹, 郑华升^2,3*, 朱四荣⁴

1.武汉华夏理工学院,武汉430223;
2.武汉科技大学理学院,武汉430081;
3.冶金工业过程系统科学湖北省重点实验室,武汉430081;
4.武汉理工大学理学院,武汉430070

收稿日期:2018-03-02 出版日期:2018-08-28 发布日期:2018-08-28
通讯作者: 郑华升(1981-),男,副教授,博士,主要从事复合材料及结构的功能特性方面的研究,whutzhs@sina.com。
作者简介:李静(1986-),女,讲师,硕士,主要从事复合材料及结构的力学性能方面的研究。
基金资助:
湖北省教育厅科学技术研究项目(B2017396)

TRANSIENT EFFECT OF UNIDIRECTIONAL CONTINUOUS CFRP IN ELECTRIFYING

LI Jing¹, ZHENG Hua-sheng^2,3*, ZHU Si-rong⁴

1.Wuhan Huaxia University of Technology, Wuhan 430223, China;
2.School of Science, Wuhan University of Science and Technology, Wuhan 430081, China;
3.Hubei Province Key Laboratory of Systems Science in Metallurgical Process, Wuhan 430081, China;
4.School of Science, Wuhan University of Technology, Wuhan 430070, China

Received:2018-03-02 Online:2018-08-28 Published:2018-08-28

摘要/Abstract

摘要： 采用不同大小的激励电流,研究了单向连续碳纤维增强塑料(CFRP)从通电初期到稳定阶段的电压响应规律。结果表明,当激励电流≥300 mA时,在通电初期,试样的电阻急剧减小,当通电时间达到100 s左右后,电阻逐渐趋于稳定。激励电流越大,其加载初期的电阻变化速度越快,其稳定状态下的电阻变化量也越大。在通电过程中CFRP试样的温度逐渐上升,其温度变化曲线形状与电阻的暂态响应曲线形状基本相同,稳定状态下的温升随着激励电流的增大而增大。实验结果揭示了通电发热所引起的温敏效应是形成CFRP暂态响应的主要原因。

关键词: 单向连续CFRP, 四电极法, 暂态效应

Abstract: The voltage response of unidirectional continuous carbon fiber reinforced plastics (CFRP) in electrifying to stable stage was studied with different flowing currents. In the case of current greater than or equal to 300 mA, the resistance of the CFRP specimen was found to decrease dramatically initially and become stable gradually after 100 s. The greater the current is, the more quickly the resistance varies in the initial stage and the greater the resistance change is in the stable stage. The temperature of CFRP increases gradually and the temperature curve is similar to transient response curve. In addition, the temperature change in the stable stage also increases with the increase of the current. The results reveal that transient effect of unidirectional continuous CFRP is mainly caused by the temperature sensitive response due to the ohmic heating. Based on the experimental results, for the purpose of accurately measuring the resistance change, a few suggestions were made on the applications of CFRP as piezoresistive sensors.

Key words: unidirectional continuous CFRP, four-probe method, transient effect

中图分类号:

TB332

李静, 郑华升, 朱四荣. 通电过程中单向连续CFRP的暂态效应[J]. 玻璃钢/复合材料, 2018, 0(8): 32-35.

LI Jing, ZHENG Hua-sheng, ZHU Si-rong. TRANSIENT EFFECT OF UNIDIRECTIONAL CONTINUOUS CFRP IN ELECTRIFYING[J]. Fiber Reinforced Plastics/Composites, 2018, 0(8): 32-35.

参考文献

[1] K. Schulte, Ch. Baron. Load and failure analyses of CFRP laminates by means of electrical resistivity measurements[J]. Composites Science and Technology, 1989, 36(1): 63-76.
[2] 许兆辉, 朱建锋, 丁勇, 等. 碳纤维复合材料力阻效应研究综述[J]. 玻璃钢/复合材料, 2015(7): 86-89.
[3] 郑华升, 李静, 朱四荣, 等. 基于CFRP智能表层的GFRP结构变形监测[J]. 玻璃钢/复合材料, 2015(11): 20-24.
[4] Todoroki A., Yoshida J. Electrical resistance change of unidirectional CFRP due to applied load[J]. Jsme International Journal, 2004, 47(3): 357-364.
[5] 邓友生, 田青芸. 树脂基碳纤维智能层电测混凝土表面裂缝宽度[J]. 中南大学学报(自然科学版), 2011, 42(7): 2120-2125.
[6] 朱四荣, 周志勇, 吕泳, 等. 基于连续碳纤维/树脂智能材料的梁结构应变模态表征[J]. 复合材料学报, 2013, 30(3): 240-246.
[7] Christner C., Horoschenkoff A., Rapp H.. Longitudinal and transverse strain sensitivity of embedded carbon fibre sensors[J]. Journal of Composite Materials, 2013, 47(2): 155-167.
[8] Huasheng Zheng, Sirong Zhu, Zhuoqiu Li. Continuous deformation monitoring by polymer-matrix carbon fiber sensitive layer[J]. Journal of Wuhan University of Technology-materials Science Edition, 2016, 31(3): 705-712.
[9] 王勃, 欧进萍, 张新越, 等. CFRP筋及其加筋混凝土梁感知性能试验与分析[J]. 哈尔滨工业大学学报, 2007, 39(12): 220-224.
[10] N. Angelidis, C.Y. Wei, P. E. Irving. The electrical resistance response of continuous carbon fibre composite laminates to mechanical strain[J]. Composites: Part A, 2004, 35(10): 1135-1147.
[11] D. Wang, D.D.L. Chung. Through-thickness piezoresistivity in a carbon fiber polymer-matrix structural composite for electrical resistance-based through-thickness strain sensing[J]. Carbon, 2013, 60(12): 129-138.
[12] D. Gordon, S. Wang, D.D.L. Chung. Piezoresistivity in unidirectional continuous carbon fiber polymer-matrix composites: single-lamina composite versus two-lamina composite[J]. Instrumentation Science & Technology, 2004, 11(1): 95-103.
[13] A. Todoroki, K. Yamad, Y. Mizutani, et al. Impact damage detection of a carbon-fibre-reinforced-polymer plate employing self-sensing time-domain reflectometry[J]. Composite Structures, 2015, 130: 174-179.
[14] J. Wen, Z. Xia, F. Choy. Damage detection of carbon fiber reinforced polymer composites via electrical resistance measurement[J]. Composites Part B, 2011, 42(1): 77-86.
[15] Kupke M., Schulte K., Schuler R.. Non-destructive testing of FRP by D.C. and A.C. electrical methods[J]. Composites Science and Technology, 2001, 61(6): 837-847.