SPH-BASED NUMERCIAL SIMULATION OF COMPOSITE MATERIAL UNDER BIRD IMPACT

Abstract

Abstract: In this paper, high-velocity impacts for application to the bird-strike problem of composite laminates were studied. The progressive damage model is used to simulate composite laminates, in order to study the deformation and damage of composite laminates subjected to the bird strike. The process of composite laminates by bird impact is simulated through the smoothed particle hydrodynamics method (SPH) coupled explicit finite element method. This paper analyses the damage of bird when it hits the composite laminates. The progressive damage characteristics of a unidirectional composite laminates, and the damage of fiber and matrix of every layer in the composite laminates. The influence of absorbing energy of laminates is studied at the direction of different incident angle of bird. The analysis results show that the laminates layers' orientations should have corresponding change in order to improve the energy absorption of composite laminates.

Key words: composite material, bird impact, SPH, progressive damage , simulation

CLC Number:

TB332

YU Yong-qiang, LI Cheng, TIE Ying. SPH-BASED NUMERCIAL SIMULATION OF COMPOSITE MATERIAL UNDER BIRD IMPACT[J]. Fiber Reinforced Plastics/Composites, 2017, 0(5): 48-52.

References

[1] 铁瑛, 李成. 基于应力和变形值最小的复合材料含孔板孔形参数有限元优化[J]. 玻璃钢/复合材料, 2010(1): 10-12.
[2] 李成, 郑艳萍. 机械连接结构中含圆孔复合材料板的应力计算及仿真分析[J]. 玻璃钢/复合材料, 2007(03): 3-5.
[3] 李成, 郑艳萍, 王迎佳. 积分方程求解复合材料开口板的应力分布[J]. 玻璃钢/复合材料, 2007(01): 9-12.
[4] 李成, 铁瑛, 郑艳萍. 含复杂孔形复合材料板孔边应力场的数值分析[J]. 玻璃钢/复合材料, 2007(08): 18-20.
[5] 李志强, 韩强, 杨建林, 等. 基于SPH方法的鸟撞飞机风挡的数值模拟[J]. 华南理工大学学报(自然科学版), 2009(12): 146-151.
[6] 李成, 郭文辉, 铁瑛. 采用流固耦合方法的复合材料层合板鸟撞分析[J]. 郑州大学学报(工学版), 2015(36): 76-80.
[7] 简成文, 李书. 民机机头复合材料风挡结构鸟撞分析[J]. 民用飞机设计与研究, 2015(1): 39-46.
[8] 陈勇. 冲击载荷下纤维金属层板损伤行为及动态响应特性研究[D]. 哈尔滨: 哈尔滨工业大学, 2015.
[9] 王富生, 张钧然, 郑涵天, 等. 复合材料加筋壁板鸟撞动响应分析[J]. 振动与冲击, 2013(4): 6-9.
[10] 李娜, 孔令勇, 于锋礼. 单元尺寸对复合材料层压板蒙皮鸟撞模拟的影响分析[J]. 科学技术与工程, 2013(15): 4459-4462.
[11] 王富生, 张钧然, 刘洋, 等. 复合材料雷达罩耐鸟撞和电磁性能综合优化设计[J]. 振动与冲击, 2013(13): 12-18.
[12] Reza Hedayati, Saeed Ziaei-Rad. A new bird model and the effect of bird geometry in impacts from various orientations[J]. Aerospace Science and Technology, 2013(28): 9-20.
[13] 赵海鸥. LS-DYNA动力分析指南[M]. 天津: 兵器出版社, 2003.
[14] Wilbeck J S. Impact behavior of low strength projectiles[J]. Air Force Materials Laboratory, 1978.

[1]	WU Yicheng, LIAO Yingqiang, ZHANG Chi. Study of friction behavior between carbon fiber and mandrel material in wet winding [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 89-95.
[2]	ZHANG Gaotao, FANG Zhigang, NI Aiqing, BIAN Tianya, LI Xiang, Li Liang, WANG Jihui. Research on the failure mode of composite bonded-bolted hybrid connection structures under bending loads [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 96-102.
[3]	WANG Juchuang, CAO Qinglin, QIU Rui, REN Mingwei, GUO Ping’an. The performance study of glass fiber-reinforced steel plate composite materials for battery pack lid [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 143-152.
[4]	QIU Xinghan, SONG Tong, ZHANG Sai, WANG Fusheng, MENG Xianming, CHEN Yajun. Parameters calibration and validation of carbon fiber reinforced composite based on *MAT_58 model [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(3): 54-62.
[5]	FENG Jing, ZHANG Pengxiang, JIANG Yue, ZHU Liping, LI Shuang, XI Jianfei. Numerical simulation study on the pultrusion curing process of carbon fiber/epoxy resin composite materials [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(3): 63-70.
[6]	LIU Jiaxin, LIN Zaiwen, ZOU Zhiwei, CHENG Xianhe, CAO Yanjun, TIAN Ya. Process simulation and optimization of H-section annular support structure made of carbon fibre composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(3): 71-78.
[7]	LU Zhenhua, ZHOU Songsong, ZHOU Jun, DU Yijun, LI Peng. Simulation of heat transfer and curing of pultruded H-shaped insulator core rod process [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(3): 121-129.
[8]	YANG Ruirui, WANG Yating, RAN Xiaolu, LIU Wanshuang. Toughening vinyl ester resin by silane-modified graphene oxide [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(2): 82-90.
[9]	YU Huan, SUN Pengwen, SUN Wenbo, DENG Hailong, WEN Yaoguang, ZHOU Wenming, DONG Jian, LIU Weichao. Fatigue residual stiffness prediction model based on the degradation law of composite material properties [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(1): 23-28.
[10]	YE Ti, FENG Hao, LI Guo. Strength prediction of composite material bolted joints based on BP neural networks [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(1): 29-34.
[11]	YANG Cheng, JIANG Pengfei, ZHU Liping, DONG Jiping, WANG Jingyuan. Study on temperature-dependent thermal expansion properties of carbon fiber and CFPR [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(1): 35-41.
[12]	DAI Zhonghao, ZHOU Shaoping, LUO Zhi, LI Qinfei, LI Jinliang. Baseless damage localization in composites based on symmetric damage by Lamb wave spatial inversion [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(1): 59-66.
[13]	WANG Yuqi, XU Zhiming, XU Liming, YUAN Xiaoxu, JIANG Yue, LI Shuang, CAI Dengan, ZHOU Guangming. Pressure bearing and bursting performance of composite frangible cover [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(1): 109-116.
[14]	HE Rong, ZENG Yida, SONG Yishu, HU Yu, JIANG Yi, LIU Zemin. Research progress on selective laser melting processing of Al-based composite material [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(1): 133-140.
[15]	FU Chengjian, LIN Song, GUO Shufen. Prediction and analysis of burst pressure of type Ⅳ composite cylinder based on progressive damage [J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(9): 92-97.