EFFECT OF PRESSURE APPLYING MOMENT ON MECHANICAL PROPERTIES OF CARBON FIBER REINFORCED MODIFIED BISMALEIMIDE COMPOSITE MATERIA

Abstract

Abstract: Differential scanning calorimetry (DSC) was adopted to analyze the curing process of the modified bismaleimide resin system. The resin viscosity was tested and analyzed, and then three different temperature values, 100℃,110℃ and 120℃, were selected to investigate the effect of pressure applying moment on mechanical properties. The results show that the mechanical properties get a little better with the lower temperature of pressure applying moment. Different mechanical property shows different sensitivities to the change of pressure applying moment and tensile properties are more sensitive than compressive properties, flexural properties and interlaminar shear properties in this research. This research provides important reference value for further study on process properties of modified bismaleimide resin system and mechanical properties of carbon fiber reinforced modified bismaleimide composite material.

CLC Number:

TB332

WEN Qiong-hua, MA Kai-wei, LI Bo, WEN You-y. EFFECT OF PRESSURE APPLYING MOMENT ON MECHANICAL PROPERTIES OF CARBON FIBER REINFORCED MODIFIED BISMALEIMIDE COMPOSITE MATERIA[J]. Fiber Reinforced Plastics/Composites, 2016, 0(4): 72-76.

References

[1] 王绍凯, 马绪强, 李敏, 等. 飞行器结构用复合材料四大核心技术及发展[J]. 玻璃钢/复合材料, 2014(9): 76-84.
[2] 何楠, 杨加斌, 高峰. 先进复合材料在军用无人机上的应用动向[J]. 玻璃钢/复合材料, 2013(2): 94-97.
[3] 张立功, 张佐光. 先进复合材料中主要缺陷分析[J]. 玻璃钢/复合材料, 2001(2): 42-45.
[4] 汪赫男, 张佐光, 顾轶卓, 等. 环氧复合材料层板热压成型孔隙缺陷影响因素[J]. 复合材料学报, 2007(5): 55-60.
[5] 陈超, 张娅婷, 顾轶卓, 等. 碳纤维/环氧复合材料孔隙缺陷的工艺影响因素研究[J]. 玻璃钢/复合材料, 2014(5): 51-55.
[6] Tang J, Lee W I, Springer G S. Effects of cure pressure on resin flow, voids, and mechanical properties[J]. Journal of composite materials, 1987, 21(5): 421-440.
[7] 王科, 顾轶卓, 李敏, 等. 零吸胶工艺复合材料层板成型质量与预浸料特性关联分析[J]. 玻璃钢/复合材料, 2011(3): 28-33.
[8] Wilkinson S P, Ward T C, McGrath J E. Effect of thermoplastic modifier variables on toughening a bismaleimide matrix resin for high-performance composite materials[J]. Polymer, 1993, 34(4): 870-884.
[9] 汪源龙, 程小全, 范舟, 等. 国产 CCF300/双马树脂层合板高温拉伸与压缩性能试验研究[J]. 复合材料学报, 2011, 28(3): 180-184.
[10] 惠雪梅, 尤丽虹, 田建团. 新型无溶剂耐高温双马树脂及其碳纤维复合材料[J]. 宇航材料工艺, 2011, 41(1): 54-57.
[11] 白淑贞, 卢艳. 用 DSC, DMA 法确定环氧基复合材料固化参数的初步研究[J]. 机械工程材料, 1983(1): 44-47.
[12] Keenan, M. R.. Autocatalytic cure kinetics from DSC measurements: Zero initial cure rate[J]. Journal of applied polymer science, 1987, 33(5): 1725-1734.

[1]	WANG Weilun, CAO Zihe, YU Xingchen, LU Yixian, CAO Dongfeng, HU Haixiao, JI Yundong, LI Shuxin. Research on residual strain monitoring and failure behavior of thick L-shaped composite laminates [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 1-10.
[2]	QIN Cheng, ZHA Yibin, ZHANG Lianhe, REN Hao, CHENG Yanan, LI Yongfeng, LIU Yong, ZHANG Hui. Study on the structure and properties of unidirectional carbon fiber fabric composite materials with different stitch densities and layers [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 11-19.
[3]	SUN Shiyong, LI Hailin, WANG Junlong. Pore defects characterization and elastic parameters prediction of needle-punched ceramic matrix composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 20-27.
[4]	YUE Wuyang, LUO Hao, WU Yibo, ZHOU-HE Lezi, ZHOU Huamin. Permeability prediction model of two-dimensional fiber fabrics with shear deformation based on ellipse tensor superposition [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 28-36.
[5]	HE Xiaohong, LÜ Jian, ZHAI Shaojie, YANG Shangyu, ZHAO Xinbo. Experimental investigation and strength analysis of hybrid adhesive-woven bonding joints in steel/carbon fiber reinforced plastics [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 37-46.
[6]	HUANG Xuanhong, WANG Yonggang. The value of mixed elements splitting factor and analysis of static problems in laminated plates [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 47-56.
[7]	YU Feng, SHI Kun, GUAN Yucong, FANG Yuan, XU Bo. Study analysis of PVC-CFRP confined concrete column-RC beam exterior joints with core steel tube under low cyclic loading [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 57-67.
[8]	LI Yu, SI Xiaoliang, HUANG Yeyuan, LI Zhibao, DUAN Zemin. Experimental and simulation study on lightning damage and protection of carbon fiber composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 68-73.
[9]	DU Xuwei, NIU Xuejuan. Research on improving the interlayer fracture performance of CFRP laminates with nano ZnO resin films [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 74-81.
[10]	CUI Wei, PENG Huanling, WANG Hongwei, LEI Hongmei. Damage evolution and resistivity response analysis of interlaminar mode Ⅰ fracture for continuous fiber reinforced ceramic matrix composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 82-88.
[11]	WU Yicheng, LIAO Yingqiang, ZHANG Chi. Study of friction behavior between carbon fiber and mandrel material in wet winding [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 89-95.
[12]	ZHANG Gaotao, FANG Zhigang, NI Aiqing, BIAN Tianya, LI Xiang, Li Liang, WANG Jihui. Research on the failure mode of composite bonded-bolted hybrid connection structures under bending loads [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 96-102.
[13]	GE Ping, KONG Peng, MA Guorun, TANG Yuhang. Correlation of heat distortion temperature and glass transition temperature of glass fiber reinforced unsaturated polyester resins and their matrix resins [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 103-108.
[14]	LIU Cong, XIA Shaoling, XU Jixian, ZHAO Congcong, GUO Shengdong, JIA Yu. Preparation and properties of functionalized graphene oxide modified phenolic resin microfoam composites [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 109-116.
[15]	JI Fengchun, PENG Zhihang, YANG Xin, XIANG Yang, FENG Jian. Preparation and performance study of hybridphenolic resin/glass fiber insulation tiles [J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(4): 117-124.