THE DEFORMATION OF FRPM PIPE BURIED IN HIGHWAY UNDER VEHICLE LOAD

Abstract

Abstract: In order to study the axial deformation of FRPM pipe buried in highway under unconventional vehicle load, an outdoor static test was designed with the method of hierarchical load. Then, through the comparison of the result measured by ABAQUS and outdoor test, the model that could meet the actual working conditions was established. Finally, the axial deformation under every filling height was calculated. This work can provide the detailed and reliable theoretical basis for FRPM pipe applied in highway.

Key words: flexure deformation, FRPM pipe, ABAQUS numerical simulation

CLC Number:

TB332

ZHANG Ji-yuan, WEI Lian-yu, ZHANG Guo-pan, CHEN Zhao-nan. THE DEFORMATION OF FRPM PIPE BURIED IN HIGHWAY UNDER VEHICLE LOAD[J]. Fiber Reinforced Plastics/Composites, 2016, 0(10): 56-59.

References

[1] 李卓球, 岳红军. 玻璃钢管道与容器[M]. 北京: 科学出版社,
1998.
[2] 蒋元平, 何晓鸣. 玻璃纤维硅砂增强公路涵管的环向内力分析[J]. 长江大学学报, 2006.
[3] 全国纤维增强塑料标准化技术委员会. 中国标准出版社第五编辑室.纤维增强塑料(玻璃钢)标准汇编(第二版)[M]. 北京: 中国标准出版社, 2007.
[4] 冯忠居, 乌延玲. 钢波纹管涵洞受力与变形特性模拟试验研究[J]. 岩土工程学报, 2013.
[5] 陈成林, 周启源. 玻璃钢顶管在高速公路涵洞工程的应用[J]. 公路, 2007.
[6] 范学忠, 张蓓. 环氧树脂产业发展现状及趋势[J]. 中国石油和化工经济分析, 2014.
[7] 孔庆宝. 玻璃钢管路工程寿命的分析研究[J]. 纤维复合材料, 2010.
[8] 公路桥涵设计通用规范: JTG D60-2015[S].
[9] 魏晨, 康永. 管道在外力作用下变形机理研究[J]. 西安石油大学, 2014.
[10] 代汝林, 李忠芳, 王姣. 基于ABAQUS的初始地应力平衡方法研究[J]. 重庆工商大学学报, 2012.
[11] 刘全林, 杨敏. 地埋管与土相互作用分析模型及其参数确定[J]. 岩土力学, 2014.
[12] 徐磊, 刘杰, 叶志才, 等. 埋地玻璃钢夹砂管地震响应的影响因素分析[J]. 玻璃钢/复合材料, 2012.
[13] Roham Rafiee, Farshid Reshadi. Simulation of functional failure in GRP mortar pipes[J]. Composite Structures, 2014(113):155-163.
[14] M.Farshad,A.Necola.Strain corrosion of glass fibre-reinforced plastics pipes[J]. Polymer Testing, 2014(23):517-521.
[15] 黄吉龙, 王建华. 大口径玻璃钢夹砂顶管室内试验与数值分析[J]. 上海交通大学, 2007.
[16] Nan Ji Jin, Hae Geun Hwang, Jung Heum Yeon. Structural analysis and optimum design of GRP pipes based on properties of materials[J]. Construction and Building Materials, 2015(38): 316-326.