Research progress of DIC on deformation and damage characterization of composite materials

doi:10.19936/j.cnki.2096-8000.20250728.018

Abstract

Abstract: As a practical and effective tool for surface deformation measurement, digital image correlation (DIC) technology has been widely accepted and increasingly used to measure the deformation and damage behavior of composite materials. Composite materials have the properties of non-uniformity and anisotropy, which lead to complex deformation behaviors after being loaded. Traditional measurement techniques cannot accurately capture these behaviors due to various factors. As an advanced optical measurement technology and means, DIC has significant advantages in measuring the deformation behavior of composite materials. The principle of DIC and the factors that affect measurement accuracy are described in detail. Then, the application of DIC in deformation measurement and damage characterization of composite materials is mainly introduced. Finally, the possible development direction of DIC in the future is prospected.

Key words: composites materials, digital image correlation, damage characterization

CLC Number:

TB332

ZHAO Libin, YU Shaoyu, ZHANG Zheyi, HU Ning. Research progress of DIC on deformation and damage characterization of composite materials[J]. COMPOSITES SCIENCE AND ENGINEERING, 2025, 0(7): 148-160.

References

[1] 黄泳桦. 碳纤维复合材料工字梁抗弯曲性能研究[D]. 郑州: 中原工学院, 2023.
[2] 宫文然. 含分层损伤复合材料(CFRP)层合板结构屈曲和后屈曲力学行为研究[D]. 天津: 天津大学, 2015.
[3] ZEINALI E, NAZARI A, SHOWKATI H. Experimental-numerical study on lateral-torsional buckling of PFRP beams under pure bending[J]. Composite Structures, 2020, 237: 111925.
[4] 程晖, 樊新田, 徐冠华, 等. 航空复合材料结构精密干涉连接技术综述[J]. 航空学报, 2021, 42(10): 55-73.
[5] 杨思满. 车用碳纤维复合材料本构参数反演方法[D]. 长沙: 湖南大学, 2015.
[6] 陈亚军, 孙胜洁, 季春明. 三维数字图像相关技术(3D DIC)在材料形变研究中的应用进展[J]. 航空材料学报, 2017, 37(4): 90-100.
[7] PAN B, QIAN K, XIE H, et al. Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review[J]. Measurement Science and Technology, 2009, 20(6): 062001.
[8] 汪意. CFRP-T型接头填充区损伤数值仿真及DIC验证[D]. 南京: 南京航空航天大学, 2018.
[9] CHRYSAFI A P, ATHANASOPOULOS N, SIAKAVELLAS N J. Damage detection on composite materials with active thermography and digital image processing[J]. International Journal of Thermal Sciences, 2017, 116: 242-253.
[10] DUAN X, XU H, DONG R, et al. Digital image correlation based on convolutional neural networks[J]. Optics and Lasers in Engineering, 2023, 160: 107234.
[11] HASSAN G M. Deformation measurement in the presence of discontinuities with digital image correlation: a review[J]. Optics and Lasers in Engineering, 2021, 137: 106394.
[12] 邵新星. 高精度、实时数字图像相关变形测量[D]. 南京: 东南大学, 2018.
[13] 邵新星, 陈振宁, 戴云彤, 等. 数字图像相关方法若干关键问题研究进展[J]. 实验力学, 2017, 32(3): 305-325.
[14] HOLMES J, SOMMACAL S, DAS R, et al. Digital image and volume correlation for deformation and damage characterisation of fibre-reinforced composites: a review[J]. Composite Structures, 2023, 315: 116994.
[15] KHOO S-W, KARUPPANAN S, TAN C-S. A review of surface deformation and strain measurement using two-dimensional digital image correlation[J]. Metrology and Measurement Systems, 2016, 23(3): 461-480.
[16] YU L, PAN B. Experimental study of tensile properties and deformation evolutions of 2D and 2.5D woven SiO_2f/SiO₂ composites using single-camera stereo-digital image correlation[J]. Composite Structures, 2018, 200: 589-598.
[17] YU L, PAN B. Full-frame, high-speed 3D shape and deformation measurements using stereo-digital image correlation and a single color high-speed camera[J]. Optics and Lasers in Engineering, 2017, 95: 17-25.
[18] JANELIUKSTIS R, CHEN X. Review of digital image correlation application to large-scale composite structure testing[J]. Composite Structures, 2021, 271: 114143.
[19] PAN B, YU L, ZHANG Q. Review of single-camera stereo-digital image correlation techniques for full-field 3D shape and deformation measurement[J]. Science China Technological Sciences, 2017, 61(1): 2-20.
[20] 刘强, 周轶昊, 孙晨, 等. 基于数字图像相关的裂纹端部全场三维变形实验研究[J]. 实验力学, 2018, 33(1): 49-58.
[21] SUTTON M A, ORTEU J J, SCHREIER H. Image correlation for shape, motion and deformation measurements: basic concepts, theory and applications[M]. Springer Science & Business Media, 2009.
[22] 瞿启云, 曹爱民, 焦平, 等. 基于三维数字图像相关法测量复合材料泊松比[J]. 材料科学与工程学报, 2018, 36(2): 258-262.
[23] 朱飞鹏, 雷冬. 基于三维数字图像相关的三维形貌拼接研究[J]. 力学季刊, 2013, 34(3): 470-474.
[24] DAI X, YE H, YANG W, et al. Mechanical behaviors of inner and outer sidewalls of honeycomb cores subjected to out-of-plane compression[J]. Aerospace Science and Technology, 2022, 127: 107659.
[25] 周晓峰. 基于散斑数字图像相关的平面全场应变测量方法及应用[D]. 广州: 华南理工大学, 2012.
[26] 牟丹丹. 基于数字图像相关的复合材料连接结构检测[D]. 大连: 大连交通大学, 2022.
[27] DONG Y L, PAN B. A review of speckle pattern fabrication and assessment for digital image correlation[J]. Experimental Mechanics, 2017, 57(8): 1161-1181.
[28] 俞海. 数字图像相关方法的散斑图质量评价和应用研究[D]. 昆明: 昆明理工大学, 2015.
[29] HOLMES J, DAS R, STACHURSKI Z, et al. Development of an S-specimen geometry for shear testing of woven thermoplastic composites[J]. Composites Part B: Engineering, 2020, 203: 108485.
[30] HOLMES J, VLANDIS G, STACHURSKI Z, et al. Failure behaviour in woven thermoplastic composites subjected to various deformation modes[J]. Composites Part A: Applied Science and Manufacturing, 2021, 146: 106410.
[31] LU H, CARY P D. Deformation measurement by digital image correlation: implementation of a second-order displacement gradient[J]. Experimental Mechanics, 2000, 40(4): 393-400.
[32] 黄举. 基于卷积神经网络的数字图像相关变形测量方法研究[D]. 天津: 天津大学, 2021.
[33] PANKOW M, JUSTUSSON B, RIOSBAAS M, et al. Effect of fiber architecture on tensile fracture of 3D woven textile composites[J]. Composite Structures, 2019, 225: 111139.
[34] STIER B, SIMON J W, REESE S. Comparing experimental results to a numerical meso-scale approach for woven fiber reinforced plastics[J]. Composite Structures, 2015, 122: 553-560.
[35] 李明旭. 针刺碳/碳复合材料超高温拉伸力学性能试验研究[D]. 哈尔滨: 哈尔滨工业大学, 2020.
[36] 吕双祺, 孙燕涛, 腾雪峰, 等. 陶瓷纤维增强SiO₂气凝胶复合材料面内拉伸非均匀全场应变测量与分析[J]. 复合材料学报, 2021, 38(7): 2336-2347.
[37] ARMANFARD A, MELENKA G W. Experimental evaluation of carbon fibre, fibreglass and aramid tubular braided composites under combined tension-torsion loading[J]. Composite Structures, 2021, 269: 111139.
[38] ZHANG H, DICKSON A N, SHENG Y, et al. Failure analysis of 3D printed woven composite plates with holes under tensile and shear loading[J]. Composites Part B: Engineering, 2020, 186: 107835.
[39] WANG M, HE M, LIANG Z, et al. Fatigue damage monitoring of composite laminates based on acoustic emission and digital image correlation techniques[J]. Composite Structures, 2023, 321: 117239.
[40] GOIDESCU C, WELEMANE H, GARNIER C, et al. Damage investigation in CFRP composites using full-field measurement techniques: combination of digital image stereo-correlation, infrared thermography and X-ray tomography[J]. Composites Part B: Engineering, 2013, 48: 95-105.
[41] 杨威. 数字图像相关法在复合材料连接结构检测中的应用[D]. 大连: 大连交通大学, 2023.
[42] 张燕南, 赵文政, 雒新宇, 等. 碳纤维编织复合材料拉伸变形测量及声发射监测[J]. 工程塑料应用, 2017, 45(8): 97-100.
[43] 曲宏亮. 基于数字图像相关技术的陶瓷基复合材料本构参数识别研究[D]. 北京: 北京理工大学, 2017.
[44] YUAN Y, WANG S. Measurement of the energy release rate of compressive failure in composites by combining infrared thermography and digital image correlation[J]. Composites Part A: Applied Science and Manufacturing, 2019, 122: 59-66.
[45] EYER G, MONTAGNIER O, HOCHARD C, et al. Effect of matrix damage on compressive strength in the fiber direction for laminated composites[J]. Composites Part A: Applied Science and Manufacturing, 2017, 94: 86-92.
[46] 刘柳. 抗高冲击载荷CFRP层合结构力学性能研究[D]. 北京: 北京理工大学, 2016.
[47] CALVO J V, FEITO N, MIGUÉLEZ M H, et al. Modeling the delamination failure under compressive loads in CFRP laminates based on digital image correlation analysis[J]. Composite Structures, 2022, 287: 115265.
[48] 阳奥, 陈普会, 孔斌, 等. 数字图像相关技术在复合材料加筋曲板压缩试验中的应用[J]. 复合材料学报, 2020, 37(10): 2439-2451.
[49] 任涛. 复合材料加筋壁板低速冲击损伤及剩余压缩强度研究[D]. 南京: 南京航空航天大学, 2021.
[50] 杨洋, 陈新文, 孙炜, 等. 基于数字图像相关方法的CFRP层合板高温压缩性能实验研究[J]. 材料工程, 2021, 49(11): 62-72.
[51] DENG Y, HU X, YANG X, et al. Quasi-static compressive response and energy absorption mechanism of all-CFRP honeycomb core using digital image correlation (DIC)[J]. Thin-Walled Structures, 2024, 198: 111641.
[52] KOLANU N R, RAJU G, RAMJI M. Post-buckling failure studies on quasi-isotropic CFRP panels under positive and negative in-plane shear loading[J]. Composite Structures, 2020, 246: 112379.
[53] WARREN K C, LOPEZ-ANIDO R A, GOERING J. Experimental investigation of three-dimensional woven composites[J]. Composites Part A: Applied Science and Manufacturing, 2015, 73: 242-259.
[54] 刘刘, 韩秀霞, 郝自清, 等. 基于数字图像相关的复合材料层间剪切力学性能参数测试方法[J]. 航空材料学报, 2022, 42(4): 39-48.
[55] HE Y, MAKEEV A, SHONKWILER B. Characterization of nonlinear shear properties for composite materials using digital image correlation and finite element analysis[J]. Composites Science and Technology, 2012, 73: 64-71.
[56] MAKEEV A, IGNATIUS C, HE Y, et al. A test method for assessment of shear properties of thick composites[J]. Journal of Composite Materials, 2009, 43(25): 3091-3105.
[57] 郝文峰, 郭广平, 陈新文, 等. 基于数字图像相关方法的复合材料层间剪切性能研究[J]. 玻璃钢/复合材料, 2016(1): 29-32.
[58] 杨钧超, 陈向明, 邹鹏, 等. 复合材料层合板剪切稳定性试验及强度预测[J]. 复合材料学报, 2023, 40(3): 1707-1717.
[59] LIANG Q, LIU J, WANG X, et al. Flexural progressive failure mechanism of hybrid 3D woven composites: combination of X-ray tomography, acoustic emission and digital image correlation[J]. Composite Structures, 2022, 280: 114894.
[60] 贾梦晴. 三维面芯编织复合材料弯曲性能研究[D]. 上海: 东华大学, 2022.
[61] 贺体人, 刘刘, 徐吉峰. 数字图像相关方法辅助的IM7/8552碳纤维/环氧树脂复合材料单向带层合板沿厚度方向非线性本构参数识别[J]. 复合材料学报, 2021, 38(1): 177-185.
[62] 张鹏飞, 商雅静, 周伟, 等. 碳纤维编织复合材料弯曲损伤破坏声发射监测[J]. 中国测试, 2019, 45(5): 47-53.
[63] 陈金龙, 宫文然, 李峰. 含分层损伤复合材料层合结构在弯曲载荷作用下的屈曲问题研究[J]. 中国科学:技术科学, 2015, 45(5): 464-470.
[64] 李永善. 基于数字图像相关技术的复合材料层间压缩力学行为的实验研究[D]. 北京: 北京理工大学, 2017.
[65] COCCHI A, MONTAGNIER O, HOCHARD C. Study of hourglass-shaped specimens for the analysis of compression behaviour in fibre direction of FRP composites using compression and four-point bending tests[J]. Composites Part A: Applied Science and Manufacturing, 2021, 144: 106332.
[66] XUN L, HUANG S, SUN B, et al. Torsional cracks development in carbon-fiber 3-D braided composite tubes[J]. Thin-Walled Structures, 2023, 184: 110477.
[67] XUN L, MOSLEH Y, SUN B, et al. Torsional progressive damage mechanisms in 3-D braided carbon fiber/epoxy resin composite tubes[J]. Composites Science and Technology, 2024, 252: 110615.
[68] TABLEAU N, ABOURA Z, KHELLIL K, et al. Multiaxial loading on a 3D woven carbon fiber reinforced plastic composite using tensile-torsion tests: identification of the first damage envelope and associated damage mechanisms[J]. Composite Structures, 2019, 227:111305.
[69] GU Y, ZHANG D, ZHANG Z, et al. Torsion damage mechanisms analysis of two-dimensional braided composite tubes with digital image correction and X-ray micro-computed tomography[J]. Composite Structures, 2021, 256: 113020.
[70] ZHAO G, ZHANG L, TANG C, et al. Experimental study on the torsion behavior of a 3D 4-directionally braided composite shaft using DIC and AE[J]. Polymer Testing, 2018, 72: 122-131.
[71] FLORES M, MOLLENHAUER D, RUNATUNGA V, et al. High-speed 3D digital image correlation of low-velocity impacts on composite plates[J]. Composites Part B: Engineering, 2017, 131: 153-164.
[72] ZHANG N, QIAN X, ZHANG Q, et al. On strain rate effect and high-velocity impact behavior of carbon fiber reinforced laminated composites[J]. Thin-Walled Structures, 2024, 194: 111328.
[73] ZANJANI N A, KALYANASUNDARAM S. Experimental and numerical studies on forming and failure behaviours of a woven self-reinforced polypropylene composite[J]. Advanced Composite Materials, 2020, 30(2): 116-130.
[74] DAVEY S, DAS R, CANTWELL W J, et al. Forming studies of carbon fibre composite sheets in dome forming processes[J]. Composite Structures, 2013, 97: 310-316.
[75] WANG Z, ZHANG W, LUO Q, et al. A novel failure criterion based upon forming limit curve for thermoplastic composites[J]. Composites Part B: Engineering, 2020, 202: 108320.
[76] 魏士博, 舒洪基, 张晓琼, 等. 薄层碳纤维/不锈钢极薄带FMLs高速冲击性能[J/OL]. 航空学报, 1-17[2024-06-21]. http://kns.cnki.net/kcms/detail/11.1929.V.20231201.1445.004.html.
[77] HUANG J, ZHAO Q, FENG Y, et al. Effect of microcracks on the tensile properties of 3D woven composites[J]. Coatings, 2021, 11(7): 794.
[78] MEHDIKHANI M, STEENSELS E, STANDAERT A, et al. Multi-scale digital image correlation for detection and quantification of matrix cracks in carbon fiber composite laminates in the absence and presence of voids controlled by the cure cycle[J]. Composites Part B: Engineering, 2018, 154: 138-147.
[79] HOLMES J, SOMMACAL S, STACHURSKI Z, et al. Digital image and volume correlation with X-ray micro-computed tomography for deformation and damage characterisation of woven fibre-reinforced composites[J]. Composite Structures, 2022, 279: 114775.
[80] TANG J, SWOLFS Y, YANG M, et al. Discontinuities as a way to influence the failure mechanisms and tensile performance of hybrid carbon fiber/self-reinforced polypropylene composites[J]. Composites Part A: Applied Science and Manufacturing, 2018, 107: 354-365.
[81] JOHANSON K, HARPER L T, JOHNSON M S, et al. Heterogeneity of discontinuous carbon fibre composites: damage initiation captured by digital image correlation[J]. Composites Part A: Applied Science and Manufacturing, 2015, 68: 304-312.
[82] KALTEREMIDOU K-A, HAJIKAZEMI M, VAN PAEPEGEM W, et al. Effect of multiaxiality, stacking sequence and number of off-axis layers on the mechanical response and damage sequence of carbon/epoxy composite laminates under static loading[J]. Composites Science and Technology, 2020, 190: 108044.
[83] CASTANEDA N, WISNER B, CUADRA J, et al. Investigation of the Z-binder role in progressive damage of 3D woven composites[J]. Composites Part A: Applied Science and Manufacturing, 2017, 98: 76-89.
[84] HOLMES J, SOMMACAL S, DAS R, et al. Characterisation of off-axis tensile behaviour and mesoscale deformation of woven carbon-fibre/PEEK using digital image correlation and X-ray computed tomography[J]. Composites Part B: Engineering, 2022, 229: 109448.
[85] CHEN T, YE M, YAO C, et al. Fatigue behavior and digital image correlation monitoring of steel plates with mixed-mode edge cracks repaired with CFRP materials[J]. Composite Structures, 2023, 304:116408.
[86] HOLMES J, HAFIZ Y, STACHURSKI Z, et al. Surface topography evolution of woven thermoplastic composites under deformation[J]. Composites Part B: Engineering, 2020, 188: 107880.
[87] DONG J, HU C, HOLMES J, et al. Structural optimisation of cross-chiral metamaterial structures via genetic algorithm[J]. Composite Structures, 2022, 282: 115035.
[88] TABATABAEI S A, SWOLFS Y, WU H, et al. Full-field strain measurements and meso-FE modelling of hybrid carbon/self-reinforced polypropylene[J]. Composite Structures, 2015, 132: 864-873.
[89] GUL S, TABRIZI I E, OKAN B S, et al. An experimental investigation on damage mechanisms of thick hybrid composite structures under flexural loading using multi-instrument measurements[J]. Aerospace Science and Technology, 2021, 117: 106921.
[90] REINER J, CHEN C, VAZIRI R, et al. Combining digital image correlation and phased-array ultrasonics for non-destructive testing of translaminar fracture in composite laminates[J]. Composites Part A: Applied Science and Manufacturing, 2022, 161: 107060.
[91] LI D, ZHOU J, OU J. Damage, nondestructive evaluation and rehabilitation of FRP composite-RC structure: a review[J]. Construction and Building Materials, 2021, 271: 121551.