NONLINEAR MICROMECHANICS ANALYSIS OF COMPOSITES

Abstract

CLC Number:

TB332

ZHOU Zhu-Lin, YAO Hui, LIU Jian. NONLINEAR MICROMECHANICS ANALYSIS OF COMPOSITES[J]. Fiber Reinforced Plastics/Composites, 2009, 209(1): 10-14.

［1］陈浩然.非线性多模量复合材料的增量应力和增量应变关系［C］.中国力学学会“复合材料力学专题讨论会”，1984.
［2］ J.N.Craddock, A. R. Zak and J. N. Majerus, Nonlinear Response of Composite Material Structures［J］.Journal of Composite Materials，1977，（11)：204221.
［3］ SADAO AMIJIMA AND TSONDYOKI ADACH.Nonlinear StressSt min Response of Laminate Composites［J］.Journal of Composite Materials，1979,(13):206218.
［4］ R.M.Jones.Modeling Nonlinear Deformation of CarbonCarbon Composite Materials［J］.AIAA Journal，1980，18（8)：9951001.
［5］ R.M.Jones.A Nonsymmetric Compliance Matrix Approach to Nonlinear multimodulus orthotropic Materials［J］.AIAA Journal, 1977.
［6］ R.M.Jones and H. S. Morgan.Analysis of Nonlinear StressStrain Behavior of FiberReinforced Composite Materials［J］.AIAA Journal，1977.
［7］ R.M.Jones and A. R Dudley.Material Models for Nonlinear Deformation of Graphite［J］.AIAA Journal，1976.
［8］ R.M.Jones.TheoreticalExperimental Correlation of Material Models for Nonlinear Deformation of Graphite［J］.AIAA Journal,1976.
［9］ R.S.Sandhu.Nonlinear Behavior of unidirectional and Angle ply Laminate［J］.Journal Aircraft,1976.
［10］ NASA CR2313.Nonlinear Behavior of Fiber［J］.Composite Laminates,1974.
［11］ AD779927, R. S. Sandhu.Ultimate Strength Analysis of Symmetric Laminates, 1974.
［12］上海玻璃钢研究所.玻璃钢结构设计［M］.北京：中国建材工业出版社，1980.
［13］周祝林.纤维增强复合材料设计［J］.机械工程材料,1979，（4)：4454.
［14］周祝林.纤维增强复合材料的强度理论及应力应变曲线的转折点［C］.中国力学学会“复合材料力学专题讨论会”论文，1984.
［15］周祝林.纤维增强复合材料应力应变曲线转折点的细观应力分析［C］.上海市力学学会八三年年会论文，1983.
［16］周祝林.纤维复合材料的方向性性能及与强度准则的关系［J］.玻璃钢，2001，（4)：5.
［17］韩耀焕等.蔡一希尔失效判据在W420/ cu复合材料中的实验研究［J］.全国第二届复合材料学术会议论文,1982.

[1]	Yang, Z. J., Zhang, Z. G., Sun, Z. J., Li, M.. ANALYSIS OF ANTIPIERCING IMPACT FEATURES AND MECHANISM OF HIGH PERFORMANCE FABRIC [J]. Fiber Reinforced Plastics/Composites, 2010, 210(1): 40-45.
[2]	Liang, X. N., Li, W., Luo, Y. K., Zhang, J. N.. STUDY OF PERMEABLE PROPERTY OF THICKSECTION REINFORCEMENT [J]. Fiber Reinforced Plastics/Composites, 2010, 210(1): 46-48.
[3]	Guo, J. J., Sun, J. L., Ren, M. S., Bai, R. C.. STUDY ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF UNIDIRECTIONAL CARBON FIBER REINFORCED COMPOSITES WITH TDE85 AND AG80 EPOXY RESIN MATRIX [J]. Fiber Reinforced Plastics/Composites, 2010, 210(1): 49-52.
[4]	Zhou, Z. L., Wu, B. M., He, Z. Y., Ding, S. Z.. DESIGN AND CALCULATION OF NACELLE COVER OF 3D SANDWICH COMPOSITES FOR WIND POWER [J]. Fiber Reinforced Plastics/Composites, 2010, 210(1): 63-66.
[5]	Xie, H. Q., Chen, X. K., Liang, F.. Simulation of unsteady temperature field and degree of cure for GFRP pultrusion and experiments [J]. Fiber Reinforced Plastics/Composites, 2010, 210(1): 73-76.
[6]	Bi, X. J., Li.Z.H., Tang, Z. H., Li, W.. THE DESIGN OF POLYMER COMPOSITE MOLDING WITH PRESSURE [J]. Fiber Reinforced Plastics/Composites, 2010, 210(1): 86-88.
[7]	Lei, W., S. C. Q., X. Y.. VARIATIONS OF MOISTURE ABSORPITION AND MECHANICAL PROPERTIES OF DIFFERENT COMPOSITES WITH IMMERSION TIME IN WATER [J]. Fiber Reinforced Plastics/Composites, 2009, 205(6): 19-24.
[8]	Liu, H. Y., Liu, D. Q.. THE ROLE OF TEMPERATURE ON IMPACT PROPERTIES OF KEVLAR/FIBERGLASS COMPOSITE LAMINATES [J]. Fiber Reinforced Plastics/Composites, 2009, 205(6): 25-27.
[9]	Zhou, L. L., Li, W., Luo, Y. K.. [J]. Fiber Reinforced Plastics/Composites, 2009, 205(6): 28-30.
[10]	Wang, J. R., Xie, H. Q.. POLYURETHANE/CARBON NANOTUBE COMPOSITES PREPARED BY SOLUTION MIXING AND THEIR PROPERTIES [J]. Fiber Reinforced Plastics/Composites, 2009, 205(6): 35-38.
[11]	Wang, G. J., Sun.Y, Li, J. L.. EXPERIMENTAL STUDY ON ULTRASONIC EVALUATION OF CARBON/EPOXY 3D BRAIDED COMPOSITES [J]. Fiber Reinforced Plastics/Composites, 2009, 205(6): 39-42.
[12]	Zhuang.X.M Zhang.H.P Yan.X. STUDY ON THE PREPARATION AND PROPERTIES OF HEMP/POLYETHYLENE COMPOSITES [J]. Fiber Reinforced Plastics/Composites, 2009, 205(6): 43-44.
[13]	Q.H.M W.C.L G.J.M. CHEMORHEOLOGICAL BEHAVIOR AND CURE KINETICS OF SILICONRYLACETYLENECONTAINING RESIN FOR RESIN TRANSFER MOLDING [J]. Fiber Reinforced Plastics/Composites, 2009, 205(6): 62-65.
[14]	Jiang, J. H., Chen, J. J.. APPLICATIONS AND DEVELOPMENT OF COMPOSITES IN RAILWAY TRANSPORTATION [J]. Fiber Reinforced Plastics/Composites, 2009, 205(6): 81-85.
[15]	YUAN Guoqing，DONG Guohua，MA Jian. STUDY OF ENDS ANCHOR METHOD OF STRESS RELAXATION SPECIMENS OF FRP TENDONS [J]. Fiber Reinforced Plastics/Composites, 2009, 209(5): 3-6.

NONLINEAR MICROMECHANICS ANALYSIS OF COMPOSITES

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments